Martin Johnson said this (probably recently): > Hi, > > Has anyone successfully used an Openvox A400P11 card with a NET5501? > I'd like to try this with AskoziaPBX.
I have successfully used an Openvox A400P card in a net5501. > The A400P card is a similar to Digium's TDM410, but roughly half the > cost. The A400P11 bundle comes with 1 FXO module and 1 FXS module. > > During calls, the A400P11 needs about 4 watts of power at 12V via a > 4-pin Molex (3.5" HDD-style) connector. Can that power be drawn from > JP10 pin 3 on the NET5501, if I supply 12V into J5? Am I correct in > assuming that the centre pin of J5 is wired to pin 3 on JP10? I have both the A400P and a Hitachi Travelstar 5K500.B hard drive plugged into JP12 without any problems, and the unit is powered through JP5 using a stock net5501 AC/DC adapter ordered from Soekris. > > Thanks for any pointers! > > - Martin > _______________________________________________ > Soekris-tech mailing list > [email protected] > http://lists.soekris.com/mailman/listinfo/soekris-tech > -- --< ((\))< >----< [email protected] >----< http://www.movealong.org/ >-- pub 1024D/05A058E0 2002-03-07 Nate Riffe (06-Mar-2002) <[email protected]> Key fingerprint = 0DAC F5CB D182 3165 D757 C466 CD42 12A8 05A0 58E0 _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
