Hi,
I've been experimenting with a net5501 board for some days.
The board run Linux (2.6.36) and worked quite nicely botting from PXE+NFS and
CF.
This same board also spent some time running as a test firewall appliance,
without apparent problems.
After a clean hard reboot (correct system shutdown followed by power supply
disconnection), the board stopped working:
- no POST with CF inserted,
- no POST with SATA drive connected.
- no POST even with a clean, unconnected board.
Other than the power led on, the only recognizable sign of activity is the
"error" led, which happens to stay on for the first 6-8 seconds after powering
on.
I'd like to have some insight in this specific condition, possible fixes and
what is causing this.
Thank you in advance.
Andrea.
----
Andrea Gronchi
[email protected]
_______________________________________________
Soekris-tech mailing list
[email protected]
http://lists.soekris.com/mailman/listinfo/soekris-tech
