Hi Karl, Karl Auerbach wrote: > > I was trying to update the bios to the 1.40b via the uManager and that > apparently went awry. > > The board no longer boots - nothing comes out the serial port and > nothing boots. > > Is there a way to recover from a BIOS update that has gone badly?
Try restoring original image: +++ and pause to enter uManager, works even when BIOS is dead. # download - download complete original image Original image are not supposed to be needed, but apperently... It's located at: http://soekris.com/media/software/b6501_140.bin Please note that there is a know bug in the uManager download function that sometimes affect the download command, you need to completely power cycle (not just use uManager commands) the board between each use of the command. Bug have been located and fixed and will be included in first comBIOS/uManager update. If that doesn't work I have an additional solution.... No mater what, a net6501 can always recover from BIOS update problems. Best Regards, Soren Kristensen CEO & Chief Engineer Soekris Engineering, Inc. _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
