One other comment: if anyone knows how to put SW1 on the net5501 in software control mode, I'd be interested to know as well.
Thanks. On 2/2/12 12:41 PM, Philip Prindeville wrote: > I've rewritten the leds-net5501 as a platform driver for 3.4. It's in > linux-next right now. > > The new version also registers a GPIO soft-switch in addition to the hard > reset (may require a little work with a soldering iron, pig-tail, jumper, and > switch). > > I thought about writing a driver for the 6501, but given that I waited for > 2.25 years after receiving my 5501 to get anything even vaguely resembling a > manual, I'm not anxious to repeat the experience without sufficient > information. > > If anyone wants to take my work and update it to handle the deltas for the > 6501, they're welcome to. > > The driver also backports to 2.6.39.4 and later: note the CS5535 GPIO driver > got renamed in 3.1 when building your config (the code works with the module > in drivers/gpio but not drivers/char). > > -Philip > > P.S. I don't read this list much, so you might need to Cc me directly if you > have questions. _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
