2012/2/5 Philip Prindeville <[email protected]>: > One other comment: if anyone knows how to put SW1 on the net5501 in software > control mode, I'd be interested to know as well.
AFAIK, that is done in the combios :) /Bjarke > Thanks. > > On 2/2/12 12:41 PM, Philip Prindeville wrote: >> I've rewritten the leds-net5501 as a platform driver for 3.4. It's in >> linux-next right now. >> >> The new version also registers a GPIO soft-switch in addition to the hard >> reset (may require a little work with a soldering iron, pig-tail, jumper, >> and switch). >> >> I thought about writing a driver for the 6501, but given that I waited for >> 2.25 years after receiving my 5501 to get anything even vaguely resembling a >> manual, I'm not anxious to repeat the experience without sufficient >> information. >> >> If anyone wants to take my work and update it to handle the deltas for the >> 6501, they're welcome to. >> >> The driver also backports to 2.6.39.4 and later: note the CS5535 GPIO driver >> got renamed in 3.1 when building your config (the code works with the module >> in drivers/gpio but not drivers/char). >> >> -Philip >> >> P.S. I don't read this list much, so you might need to Cc me directly if you >> have questions. > _______________________________________________ > Soekris-tech mailing list > [email protected] > http://lists.soekris.com/mailman/listinfo/soekris-tech _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
