Hello,
I have difficulties getting the command to work:
soekris~# sysctl hw.setperf=100
sysctl: hw.setperf: value is not available
Running GENERIC.MP i386 on soekris 6501-70 (attached is a dmesg)
Have you modified the kernel to get hw.setperf option?
Cheers,
On Thu, Jul 5, 2012 at 7:33 PM, David Coppa <[email protected]> wrote:
> On Thu, Jul 5, 2012 at 1:30 PM, Mitja Muženič <[email protected]> wrote:
>>
>>
>>> -----Original Message-----
>>> From: [email protected] [mailto:soekris-tech-
>>> [email protected]] On Behalf Of Stuart Henderson
>>> Sent: Thursday, July 05, 2012 1:21 PM
>>> To: [email protected]
>>> Subject: Re: [Soekris] Soekris 6501-70 / 6501-50 Network Throughput
>>> under Debian / OpenBSD
>>>
>>> Replying to an old(ish) post.
>>>
>>> On 2011-12-14, Josh <[email protected]> wrote:
>>> > Is there any way to improve the network throughput under OpenBSD?
>>>
>>> Some more information came to light...
>>> Here's a workaround until it can be fixed:
>>>
>>> sysctl hw.setperf=0
>>> sysctl hw.setperf=100
>>
>> Actually just the latter one is enough:
>>
>> echo "sysctl hw.setperf=100" >> /etc/rc.local
>
> Or "hw.setperf=100" >> /etc/sysctl.conf
>
> ciao,
> david
OpenBSD 5.1 (GENERIC.MP) #188: Sun Feb 12 09:55:11 MST 2012
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Genuine Intel(R) CPU @ 1.60GHz ("GenuineIntel" 686-class) 1.61 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,LONG,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,LAHF
real mem = 2146873344 (2047MB)
avail mem = 2101628928 (2004MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 20/11/03, BIOS32 rev. 0 @ 0xfac40
mpbios0 at bios0: Intel MP Specification 1.4
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: unknown i686 model 0x26, can't get bus clock (0x41880000)
cpu0: apic clock running at 100MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Genuine Intel(R) CPU @ 1.60GHz ("GenuineIntel" 686-class) 1.61 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,LONG,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,LAHF
mpbios0: bus 0 is type PCI
mpbios0: bus 64 is type ISA
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins
pcibios0 at bios0: rev 2.0 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf3880/96 (4 entries)
pcibios0: no compatible PCI ICU found: ICU vendor 0x8086 product 0x8186
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #13 is the last bus
bios0: ROM list: 0xc8000/0x2400 0xca800/0x4c00 0xcf800/0xee00
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel E600 Host" rev 0x05
pchb1 at pci0 dev 1 function 0 "Intel E600 Config" rev 0x00
ppb0 at pci0 dev 23 function 0 "Intel E600 PCIE" rev 0x00
pci1 at ppb0 bus 1
ppb1 at pci1 dev 0 function 0 "Intel EG20T PCIE" rev 0x01
pci2 at ppb1 bus 2
"Intel EG20T Packet Hub" rev 0x01 at pci2 dev 0 function 0 not configured
"Intel EG20T Ethernet" rev 0x01 at pci2 dev 0 function 1 not configured
"Intel EG20T GPIO" rev 0x00 at pci2 dev 0 function 2 not configured
ohci0 at pci2 dev 2 function 0 "Intel EG20T USB" rev 0x01: apic 0 int 19,
version 1.0, legacy support
ohci1 at pci2 dev 2 function 1 "Intel EG20T USB" rev 0x01: apic 0 int 19,
version 1.0, legacy support
ohci2 at pci2 dev 2 function 2 "Intel EG20T USB" rev 0x01: apic 0 int 19,
version 1.0, legacy support
ehci0 at pci2 dev 2 function 3 "Intel EG20T USB" rev 0x01: apic 0 int 19
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
"Intel EG20T USB Client" rev 0x01 at pci2 dev 2 function 4 not configured
sdhc0 at pci2 dev 4 function 0 "Intel EG20T SDIO" rev 0x01: apic 0 int 18
sdmmc0 at sdhc0
sdhc1 at pci2 dev 4 function 1 "Intel EG20T SDIO" rev 0x01: apic 0 int 18
sdmmc1 at sdhc1
ahci0 at pci2 dev 6 function 0 "Intel EG20T AHCI" rev 0x01: msi, AHCI 1.1
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 1 lun 0: <ATA, TS16GMSA300, 2010> SCSI3 0/direct fixed
t10.ATA_TS16GMSA300_201109190092_
sd0: 15104MB, 512 bytes/sector, 30932992 sectors, thin
ohci3 at pci2 dev 8 function 0 "Intel EG20T USB" rev 0x01: apic 0 int 16,
version 1.0, legacy support
ohci4 at pci2 dev 8 function 1 "Intel EG20T USB" rev 0x01: apic 0 int 16,
version 1.0, legacy support
ohci5 at pci2 dev 8 function 2 "Intel EG20T USB" rev 0x01: apic 0 int 16,
version 1.0, legacy support
ehci1 at pci2 dev 8 function 3 "Intel EG20T USB" rev 0x01: apic 0 int 16
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
"Intel EG20T DMA" rev 0x00 at pci2 dev 10 function 0 not configured
puc0 at pci2 dev 10 function 1 "Intel EG20T Serial" rev 0x00: ports: 1 com
com3 at puc0 port 0 apic 0 int 19: ti16750, 64 byte fifo
puc1 at pci2 dev 10 function 2 "Intel EG20T Serial" rev 0x00: ports: 1 com
com4 at puc1 port 0 apic 0 int 19: ti16750, 64 byte fifo
puc2 at pci2 dev 10 function 3 "Intel EG20T Serial" rev 0x00: ports: 1 com
com5 at puc2 port 0 apic 0 int 19: ti16750, 64 byte fifo
puc3 at pci2 dev 10 function 4 "Intel EG20T Serial" rev 0x00: ports: 1 com
com6 at puc3 port 0 apic 0 int 19: ti16750, 64 byte fifo
"Intel EG20T DMA" rev 0x00 at pci2 dev 12 function 0 not configured
"Intel EG20T SPI" rev 0x00 at pci2 dev 12 function 1 not configured
"Intel EG20T I2C" rev 0x00 at pci2 dev 12 function 2 not configured
"Intel EG20T CAN" rev 0x00 at pci2 dev 12 function 3 not configured
"Intel EG20T 1588" rev 0x01 at pci2 dev 12 function 4 not configured
usb2 at ohci0: USB revision 1.0
uhub2 at usb2 "Intel OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci1: USB revision 1.0
uhub3 at usb3 "Intel OHCI root hub" rev 1.00/1.00 addr 1
usb4 at ohci2: USB revision 1.0
uhub4 at usb4 "Intel OHCI root hub" rev 1.00/1.00 addr 1
usb5 at ohci3: USB revision 1.0
uhub5 at usb5 "Intel OHCI root hub" rev 1.00/1.00 addr 1
usb6 at ohci4: USB revision 1.0
uhub6 at usb6 "Intel OHCI root hub" rev 1.00/1.00 addr 1
usb7 at ohci5: USB revision 1.0
uhub7 at usb7 "Intel OHCI root hub" rev 1.00/1.00 addr 1
ppb2 at pci0 dev 24 function 0 "Intel E600 PCIE" rev 0x00
pci3 at ppb2 bus 3
ppb3 at pci3 dev 0 function 0 "IDT 89HPES4T4" rev 0x0e
pci4 at ppb3 bus 4
ppb4 at pci4 dev 2 function 0 "IDT 89HPES4T4" rev 0x0e
pci5 at ppb4 bus 5
em0 at pci5 dev 0 function 0 "Intel PRO/1000 MT (82574L)" rev 0x00: msi,
address 00:00:21:c0:00:20
ppb5 at pci4 dev 3 function 0 "IDT 89HPES4T4" rev 0x0e
pci6 at ppb5 bus 6
em1 at pci6 dev 0 function 0 "Intel PRO/1000 MT (82574L)" rev 0x00: msi,
address 00:00:21:c0:00:21
ppb6 at pci4 dev 4 function 0 "IDT 89HPES4T4" rev 0x0e
pci7 at ppb6 bus 7
ppb7 at pci0 dev 25 function 0 "Intel E600 PCIE" rev 0x00
pci8 at ppb7 bus 8
ppb8 at pci8 dev 0 function 0 "IDT 89HPES4T4" rev 0x0e
pci9 at ppb8 bus 9
ppb9 at pci9 dev 2 function 0 "IDT 89HPES4T4" rev 0x0e
pci10 at ppb9 bus 10
em2 at pci10 dev 0 function 0 "Intel PRO/1000 MT (82574L)" rev 0x00: msi,
address 00:00:21:c0:00:22
ppb10 at pci9 dev 3 function 0 "IDT 89HPES4T4" rev 0x0e
pci11 at ppb10 bus 11
em3 at pci11 dev 0 function 0 "Intel PRO/1000 MT (82574L)" rev 0x00: msi,
address 00:00:21:c0:00:23
ppb11 at pci9 dev 4 function 0 "IDT 89HPES4T4" rev 0x0e
pci12 at ppb11 bus 12
ppb12 at pci0 dev 26 function 0 "Intel E600 PCIE" rev 0x00
pci13 at ppb12 bus 13
pcib0 at pci0 dev 31 function 0 "Intel E600 LPC" rev 0x00
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ti16750, 64 byte fifo
com0: console
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on sd0a (627e0d594873e50f.a) swap on sd0b dump on sd0b
cpu1: unknown i686 model 0x26, can't get bus clock (0x41880000)
_______________________________________________
Soekris-tech mailing list
[email protected]
http://lists.soekris.com/mailman/listinfo/soekris-tech
