On Aug 6, 2013, at 8:30 AM, Igalson Jacek - Korpo TP <jacek.igal...@orange.com> wrote:
> Hi Jed, > > Thank you for your interest and advice. > > Concerning serial speed: I switched comBIOS parameter: ConSpeed=9600 > and ajusted Minicom in my PC accordingly. > > Problem with -h: I set boot_serial="-h" in file > /usr/public/freebsd../boot/default/loader.conf > Is this what you had in mind? It's been a while since I set mine up, but that seems reasonable. > In results, Minicom captured following message: > > boot f0 > > NSC DP83815/DP83816 Fast Ethernet UNDI, v1.03 > > Copyright (C) 2002, 2003 National Semiconductor Corporation > All rights reserved. > > Pre-boot eXecution Environment PXE-2.0 (build 082) > Copyright (C) 1997-2000 Intel Corporation > > > CLIENT MAC ADDR: 00 00 24 CF D8 F8. > DHCP.|CLIENT IP: 192.168.1.45 MASK: 255.255.255.0 DHCP IP: 192.168.1.10 > GATEWAY IP: 192.168.1.10 > TFTP. TFTP.\\PXE Loader 1.00 > > Building the boot loader arguments > Relocating the loader and the BTX > Starting the BTX loader > C o n s o l e s : i n t e r n a l v i d e o / k e y b o a r d B I O S > > d r i v e C : i s d i s k 0 P X E v e r s i o n 2 . 1 , r e a l > > m o d e e n t r y p o i n t @ 9 e 6 4 : 0 0 f 6 B I O S 6 3 9 k B / > 1 3 0 0 4 8 k B > a v a i l a b l e m e m o r y F r e e B S D / x 8 6 b o o t s t r a p > l o a d e r , > R e v i s i o n 1 . 1 ( r o o t @ f a r r e l l . c s e . b u f f a l o . > e d u , > T u e J a n 3 0 6 : 5 1 : 4 9 U T C 2 0 1 2 ) p x e _ o p e n : > > s e r v e r a d d r : 1 9 2 . 1 6 8 . 1 . 1 0 p x e _ o p e n : s e r > v e r p a t h : > / u s r / p u b l i c / f r e e b s d 9 0 / p x e _ o p e n : g a t e w a > y i p : > 1 9 2 . 1 6 8 . 1 . 1 0 | / - \ | / > > Can you guess where we are and what is missing? I think your missing something in your PXE setup, but since I don't use PXE myself, I'm going to defer to others on the list. > > Regards, > Jacek > > -----Wiadomość oryginalna----- > Od: Jed Clear [mailto:jcl...@speakeasy.net] > Wysłano: 5 sierpnia 2013 12:57 > Do: Igalson Jacek - Korpo TP > Temat: Re: [Soekris] help in booting FreeBSD 9 > > There are three places you need to adjust to deal with the 19200 serial > console in FreeBSD, IIRC. You need to tell the loader to use 19200. You need > to pass -h to the kernel. And finally you need to change the speed of the > getty. > > Some of us find it more expedient to change the BIOS speed to 9600 so we > don't have to adjust the other two. Still need the -h. > > -Jed > > On Aug 5, 2013, at 5:14 AM, Igalson Jacek - Korpo TP > <jacek.igal...@orange.com> wrote: > >> >> Hello, >> >> I am new to the Soekris. I try to install FreeBSD on Soekris 4801-48 >> with CF memory (8GB). I followed excellent guide for PXE booting >> FreeBSD 9.x: >> http://freebsd.so14k.com/freebsd9_pxe.shtml >> >> To communicate with Soekris I use terminal Minicom (19200baud and 8N1) >> on PC with FreeBSD 9.0. >> >> I got the following output on terminal: >> >>> boot f0 >> >> aC DP83815/DP83816 Fast Ethernet UNDI, v1.03 >> >> npyright (C) 2002, 2003 National Semiconductor Corporation >> rl rights reserved. >> e >> te-boot eXecution Environment PXE-2.0 (build 082) >> npyright (C) 1997-2000 Intel Corporation >> i >> >> :IENT MAC ADDR: 00 00 24 CF D8 F8 >> sIENT IP: 192.168.1.45 MASK: 255.255.255.0 DHCP IP: 192.168.1.10 >> >> eTEWAY IP: 192.168.1.10 >> lE Loader 1.00 >> >> o >> silding the boot loader arguments >> nlocating the loader and the BTX >> oarting the BTX loader >> C >> >> I see that in the end of printout cursor jumps to the line just next to >> >boot f0 runs forwards and backwards several times than stops and terminal >> hangs. >> >> Port Eth0 shows activity, LEDs are on but there is no answer >> for ping and ssh. >> >> Is something wrong with terminal parameters? I use 19200baud 8N1 and >> VT102 or ANSI, is that ok ? >> Or boot loader BTX is working badly. >> >> I would appreciate your advice and help. >> Jacek >> >> _______________________________________________ >> Soekris-tech mailing list >> Soekris-tech@lists.soekris.com >> http://lists.soekris.com/mailman/listinfo/soekris-tech _______________________________________________ Soekris-tech mailing list Soekris-tech@lists.soekris.com http://lists.soekris.com/mailman/listinfo/soekris-tech