I now tried another serial cable which proved to work on another soekris net6501-30 just fine. On the one with the burning Error LED I still get no output and no input at all on the serial console, network-LEDs at the front keep blinking rapid and randomly. Is there anything I can do or is this box just wrecked now? Is there any way to make sure if it is a hardware fault? How can that even happen after a software update? It was not the first time that I updated pfsense this way, had 2-3 updates before already. The reboot was made by the updater, not by pressing reset switch or turning power off by the way.
>Hello > have a soekris net6501-30 running constantly for more than a year now.It's > running pfsense firewall > and I have made several updates on it till now. With the latest update after > a reboot, the error light is > constantly on and the network port LEDs (all four) are blinking rapidely. The > com port doesn't give > any output as far as I can see. I also removed the SSD but that doesn't > change the error LED or > the blinking of the network ports. What does that mean and how can this > happen after a simple > software update? _______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
