Hi all, I have OpenBSD on a net6501 which was working fine, however after the last reboot it shows a constant red "error" light and sporadically rapidly blinks all the eth0-eth3 lights. After a minute or so the eth0-eth3 lights blink again but the error light stays on. No SSH access and nothing on the RS232 console. +12V from the internal 230VAC PSU seems fine with a multimeter, also +3V is OK on a small coin-battery on the board.
Any ideas? thanks, Anders
_______________________________________________ Soekris-tech mailing list [email protected] http://lists.soekris.com/mailman/listinfo/soekris-tech
