El 06/03/13 15:36, Francesco Lamonica ha escrit:
Sorry to revive an old thread (and for the top-posting!), but I'm having
the same issue and I saw no replies on the list.
I'm using nua and I tried this right after the call to nua_create
if (g_conf.local_ip) {
url_t * local_url;
local_url = url_make(svd->nua, "sip:*.*");
local_url->url_host = g_conf.local_ip;
nua_set_params(svd->nua,
NUTAG_URL (local_url),
TAG_NULL () );
}
but it doesn't seem to be working.
I'm also managing multiple registrations, so I'd prefer something that's
specific to each registration instead of a global setting if possible.
I suppose it's just a matter of adding the "correct" tags to
nua_register/nua_invite, the problem is to know which tags are the
correct ones here.
Bye
> Hi Jerry, did you solve the problem? i might have the same issue with
> the VPN
>
>
> On Wed, May 23, 2012 at 8:41 PM, Jerry Richards
> <jerry.richa...@teotech.com <mailto:jerry.richa...@teotech.com>> wrote:
>
> I have a Freeswitch issue, where I have softphones connected to two
> separate subnets (one on eth0 and the other on eth1). When I send
> an IM (i.e. SIP MESSAGE) from the eth1 phone to the eth0 phone, a
> wireshark trace shows the source IP address of the eth1 server
> address, rather than the eth0 server address. The eth1 address
> makes no sense on the eth0 subnet, so the softphone does not reply.____
>
> __ __
>
> Is there a sofia tag to control the source IP in this case? The
> message is going out the right interface; the issue is just that the
> source IP address is wrong.____
------------------------------------------------------------------------------
Slashdot TV.
Video for Nerds. Stuff that matters.
http://tv.slashdot.org/
_______________________________________________
Sofia-sip-devel mailing list
Sofia-sip-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/sofia-sip-devel
