The successor to the SR-40 has been designed , tested, and is ready 
for sale. This is particularly good news if you were not able to get a SR-40.

This version is more frequency agile because of two issues, the 
frequency determining part is a plug-in board, and the crystal 
required is at the frequency of interest. You no longer have to get 
crystals at 4X the desired frequency.

Below is the email announcing the release of the device

You will need a SR-5 kit and at least one "Band Kit"

You can order it at the link below;

< http://www.hamsdr.com/Home.aspx >

It is found under the "Projects" tab, you need to first login to the 
web site, if you do not have an account you need to create one.


At 08:18 PM 11/6/2005, you wrote:
>Good Evening All,
>
>After a number of tests with the new v5.0 SoftRock I have deceided
>it is ready for kit production.  Orders may be placed as soon as the
>ordering system is setup at Dale's (WA8SRA) HamSDR website
>< http://www.hamsdr.com/Home.aspx > . Kit deliveries will start at the
>end of this month.
>
>Three kits will be offered as follows:
>
>1) SoftRock v5.0 QSD kit at $19 per kit (US/Canada, $20 for DX).
>This is the lower board in the two board stack and contains the 5
>VDC regulator, two voltage comparators, the QSD quad switch, and the
>dual low-noise audio amplifier.  All components to build the board
>will be provided in this kit and also a stereo audio cable will be
>included.  However, no RG174 coax cable or the BNC connector will be
>provided in the kit. (400 kits are planned)
>
>2) SoftRock v5.0 Low Band OSC/BPF kit at $7.50 per kit (US/Canada,
>$8.50 for DX).  This is the upper board in the two board stack and
>contains the oscillator circuit, the quadrature clock phase shift
>network and the BPF.  The fundamental frequency xtal will not be
>included in the kit but components will be provided for use over the
>bands from 80 meters to 30 meters. (750 kits are planned)
>
>3) SoftRock v5.0 High Band OSC/BPF kit at $7.50 per kit (US/Canada,
>$8.50 for DX).  This is again the upper board and contains the
>components for use of the SoftRock at 20 meters and above.  (250
>kits are planned. Good operation at 20 meters has been demonstrated
>but operation at bands avove 20 meters has not been done at this
>date.)
>
>When the ordering system is in place, I will post on the Yahoo
>group. Please enter your order and confirm your order information
>before sending any payment.  Preferred payment methode will be by
>PayPal at user [EMAIL PROTECTED] .
>
>Thanks and 73,
>Tony Parks KB9YIG
>
>
>
>
>
>
>
>
>
>
>Yahoo! Groups Links
>
>
>
>
>
>
>
>
>--
>No virus found in this incoming message.
>Checked by AVG Free Edition.
>Version: 7.1.362 / Virus Database: 267.12.8/162 - Release Date: 11/5/2005

Cecil Bayona
KD5NWA
www.qrpradio.com

I fail to see why doing the same thing over and over and getting the 
same results every time is insanity: I've almost proved it isn't; 
only a few more tests now and I'm sure results will differ this time ...  



------------------------ Yahoo! Groups Sponsor --------------------~--> 
Get fast access to your favorite Yahoo! Groups. Make Yahoo! your home page
http://us.click.yahoo.com/dpRU5A/wUILAA/yQLSAA/ELTolB/TM
--------------------------------------------------------------------~-> 

 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/soft_radio/

<*> To unsubscribe from this group, send an email to:
    [EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 


Reply via email to