I would really like this kit. It is
about 20 dollars for the board.
From: [email protected]
[mailto:[EMAIL PROTECTED] On Behalf
Of KD5NWA
Sent: Monday, November 07, 2005
6:17 PM
To: [email protected]
Subject: [soft_radio] SoftRock
v5.0 kits may ordered now
The successor to the SR-40
has been designed , tested, and is ready
for sale. This is particularly good news if you
were not able to get a SR-40.
This version is more frequency agile because of
two issues, the
frequency determining part is a plug-in board, and
the crystal
required is at the frequency of interest. You no
longer have to get
crystals at 4X the desired frequency.
Below is the email announcing the release of the
device
You will need a SR-5 kit and at least one
"Band Kit"
You can order it at the link below;
< http://www.hamsdr.com/Home.aspx
>
It is found under the "Projects" tab,
you need to first login to the
web site, if you do not have an account you need
to create one.
At 08:18 PM 11/6/2005, you wrote:
>Good Evening All,
>
>After a number of tests with the new v5.0
SoftRock I have deceided
>it is ready for kit production. Orders
may be placed as soon as the
>ordering system is setup at Dale's (WA8SRA)
HamSDR website
>< http://www.hamsdr.com/Home.aspx
> . Kit deliveries will start at the
>end of this month.
>
>Three kits will be offered as follows:
>
>1) SoftRock v5.0 QSD kit at $19 per kit (US/Canada,
$20 for DX).
>This is the lower board in the two board stack
and contains the 5
>VDC regulator, two voltage comparators, the
QSD quad switch, and the
>dual low-noise audio amplifier. All
components to build the board
>will be provided in this kit and also a stereo
audio cable will be
>included. However, no RG174 coax cable
or the BNC connector will be
>provided in the kit. (400 kits are planned)
>
>2) SoftRock v5.0 Low Band OSC/BPF kit at $7.50
per kit (US/Canada,
>$8.50 for DX). This is the upper board
in the two board stack and
>contains the oscillator circuit, the
quadrature clock phase shift
>network and the BPF. The fundamental
frequency xtal will not be
>included in the kit but components will be
provided for use over the
>bands from 80 meters to 30 meters. (750 kits
are planned)
>
>3) SoftRock v5.0 High Band OSC/BPF kit at
$7.50 per kit (US/Canada,
>$8.50 for DX). This is again the upper
board and contains the
>components for use of the SoftRock at 20
meters and above. (250
>kits are planned. Good operation at 20 meters
has been demonstrated
>but operation at bands avove 20 meters has not
been done at this
>date.)
>
>When the ordering system is in place, I will
post on the Yahoo
>group. Please enter your order and confirm
your order information
>before sending any payment. Preferred
payment methode will be by
>PayPal at user [EMAIL PROTECTED] .
>
>Thanks and 73,
>Tony Parks KB9YIG
>
>
>
>
>
>
>
>
>
>
>Yahoo! Groups Links
>
>
>
>
>
>
>
>
>--
>No virus found in this incoming message.
>Checked by AVG Free Edition.
>Version: 7.1.362 / Virus Database:
267.12.8/162 - Release Date: 11/5/2005
Cecil Bayona
KD5NWA
www.qrpradio.com
I fail to see why doing the same thing over and
over and getting the
same results every time is insanity: I've almost
proved it isn't;
only a few more tests now and I'm sure results
will differ this time ...
YAHOO! GROUPS LINKS
--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.362 / Virus Database: 267.12.8/162 - Release Date: 11/5/2005
--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.362 / Virus Database: 267.12.8/162 - Release Date: 11/5/2005
