Johan, The follow-on of SDRadio is almost ready. It will have a different name, and a completely new look. I have just to do some last minute changes. By example, the use of a polyphase FFT instead of the normal FFT, to increase the spectral resolution, the support of 1280 x 1024 and 1024 x 768 screen resolutions (no other will be), and some tweaking of the denoiser.
The other thing I want to finish before releasing it, is the user manual. This time there will be a complete user manual, not like SDRadio which hasn't any... and being the new program a bit more complex to use, the manual is needed. About the TX part, I am contemplating, as written in a past message, to put all the hardware dependent stuff in an external DLL, so the base code will always be the same, and you will change just the DLL for driving a different hardware. But this will be done as a second step. Perhaps, but this is just a speculation, the first HW supported could be the forthcoming exciter board for the SoftRock project. In any case, I hope to release the Rx part before the end of this month (it all depends on how much time I can devote to it), while the Tx part will be a thing of the first quarter of 2006. 73 Alberto I2PHD --------------------------------- johanmaas2001 wrote: > Alberto, > > What are the plans after v0.95 of your program? > [snip] ------------------------ Yahoo! Groups Sponsor --------------------~--> Get fast access to your favorite Yahoo! Groups. Make Yahoo! your home page http://us.click.yahoo.com/dpRU5A/wUILAA/yQLSAA/ELTolB/TM --------------------------------------------------------------------~-> Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/soft_radio/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
