Hi Cecil, I would like to add the following to your order:
3 ea. SBTC-2-10L+ splitter/combiner 6 ea Gali 74+ MMIC 2 ea ADT4-6T transformer Will you require Paypal, or could I send you a postal money order. Thanks, Jeff KD7PAW ----- Original Message ----- From: KD5NWA To: [email protected] Cc: [EMAIL PROTECTED] Sent: Saturday, August 05, 2006 12:10 PM Subject: [soft_radio] Mini-Circuits Purchase of "Power Splitter" I will be making a purchase of a Mini-Circuits Power Splitter for use in making SDR circuits. Right now I have a commitment for 69 units, if we can hit the 100 quantity the price drops $.50 per unit. See the description below; Mini-Circuits makes a SMT signal splitter that is quite useful for use in SDR radios or in transmitters. I'm thinking of buying some of these devices from Mini-Circuits and thought if others were interested to the point where we could make the 25 or 100 unit pricing we could save a lot of money. The unit price is $15.10 but at the 25 quantity order the part cost $2.64 each, and at 100 pricing its $2.15 each. The part is rated 5MHz to 1 GHz with very flat response in the whole range. The device specs are listed below, I'm looking at the SBTC-2-10L+ device for the buy. < http://www.minicircuits.com/SBTC-2-10_10L.pdf > I would sell these at Cost+Shipping+PayPal fees+ Mailing fees, I will make nothing on the deal but then I don't want to loose anything either. Shipping cost will be determined by the number of parts ordered. Mailing fees will be the cost of a padded envelope + stamp cost, Internaltional orders are $.90 + the cost of a padded envelope. If interested let me know how may you are interested in, and if we get a sufficient desired quantity we could save some money. I'm also thinking of buying an additional device, the Gali 74+ MMIC it's pricey but the specs are quite good. I would need to reach a quantity of 25 before ordering, at that the price drops to $2.35 each. 2.5dB noise DS-1GHz flat response, usable to 4GHz +38 dBm IP3 25 dB gain 19.2 dBm Power out unconditionally stable < http://www.minicircuits.com/cgi-bin/inquery.cgi?querystring=Gali&searchtype=modelfamily&x=0&y=0 > I'm also considering another device if there is sufficient interest, its a transformer similar to the one we are purchasing but has a 60KHz to 300MHz range a 1:4 turns ratio to a center tapped secondary. I could be quite handy for QSD circuits. The part number is ADT4-6T from Mini-circuits and the cost is $4.50 at Quantity 10, double that price for smaller quantities so I will not order it unless there is sufficient interes to get the quantity up to 10 units, I want 5 of them myself. < http://www.minicircuits.com/cgi-bin/inquery.cgi?querystring=adt4-6t&searchtype=modelfamily&x=0&y=0 > Let me know by Monday night if you are interested and the quantities that you want. I will later post on my website a spreadsheet with the all the cost and what each individual owes. Thanks -- Cecil KD5NWA www.qrpradio.com www.hpsdr.com "Life is short and I'm too busy tipping Sacred Cows." Don Seglio Batuna [Non-text portions of this message have been removed] [Non-text portions of this message have been removed] Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/soft_radio/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
