I'm not familiar with that part but it will most likely they would work at 2M so if the IP3 is not +35 dB it would not be the end of the world, the switches in the SoftRock croak long before that frequency. Not only that but a SoftRocks IP3 is about -20 dB due to the high gain of the op-amps.
I bought a similar part from Linear but it's rated from DC to 2.5GHz but I have not had a chance to play with it. I purchased them for
a UHF SDR. At 04:51 PM 5/16/2007, you wrote:
what I was looking was the Quadrature Phase Error less than 1 deg and the divider went up to 250 Mhz. The I/Q balance was less than .1db. That should make it so the software would have to do less adjusting. Thanks for the input. I'll still take one afternoon and check them out. Retired Old Man WB8LGA
Cecil KD5NWA www.qrpradio.com www.hpsdr.com "Blessed are the cracked, for they shall let in the light."
