Hi Ken, I'm happy for you it is working now. The button startup freq can only be used with my own modified firmware. The original firmware from SAQ had the possibility to store every freq change in eeprom. But the Atmel avr eeprom can only be written 100.000 times, that is why i like a permanent startup freq and no eeprom write after every freq change.
Before using the store startup freq or the calibrate / reset function the WinRad has to be started! On WinRad start key the connection with the usb si570 is started and on stop key stopped. 73, Fred PE0FKO sailingto wrote: > > Fred, please forgtet the last post - Winrad is now working. Not sure > what the difference is now, but it's working really nice. I can use > the LO freq at the righ side of Winrad and and change freq nicely. > > NOW to get the HF BPF module build - once Tony gets all the parts so > he can ship. > > Thank you again, > > 73 de Ken H> K9FV > > --- In [email protected] > <mailto:soft_radio%40yahoogroups.com>, "sailingto" <[EMAIL PROTECTED]> wrote: > > > > --- In [email protected] > <mailto:soft_radio%40yahoogroups.com>, Fred Krom <fred.krom@> wrote: > > > > > > I created a WinRad DLL controlling the softrock v9.0 Si570. > > > It has functions for setting the frequency, calibrate the > > frequency, > > > controlling the bandpass filter and calculating the LO for the 2m > > module. > > > <http://home.ict.nl/~fredkrom/pe0fko/ExtIO_Si570/ > <http://home.ict.nl/%7Efredkrom/pe0fko/ExtIO_Si570/> > > > <http://home.ict.nl/%7Efredkrom/pe0fko/ExtIO_Si570/ > <http://home.ict.nl/%7Efredkrom/pe0fko/ExtIO_Si570/>>> > > > > > > 73, Fred > > > PE0FKO > > > > Fred, I just downloaded the dll for Winrad - It loads at opening of > > Winrad, the dialog box comes up, but changing the freq at the LO > > (right side) of Winrad does NOT change the freq of the Si570. If I > > set the startup freq in the box on the Si570 tab in the program, > then > > hit store, it does not do anything to the Si570 setting. I check > the > > Si570 settings via the SI570_USB_Test program. I can change the > > Si570 settings via the SI570_USB_Test program OR using Rocky, but > not > > Winrad. > > > > Am I doing something wrong? > > > > This is on a Toshiba Satellite P205 VISTA notebook. > > > > Thanks for any help, > > > > 73 de Ken H> K9FV > > > >
