Hank-
The start / stop button is the fourth button to the left at the very top of the screen. As far as I can tell there isn't a keyboard shortcut to start the radio. (I looked in the docs and then tried all possible control plus alpha combinations to no avail). Good luck. -Ray WB6TPU From: [email protected] [mailto:[email protected]] On Behalf Of hank smith Sent: Monday, March 01, 2010 11:19 AM To: [email protected] Subject: Re: [soft_radio] need some help starting winrad 1.61 hello how do I start the radio? I can't find the start and stop button. is there anyway to do this via keyboard? Hank ----- Original Message ----- From: Alberto I2PHD <mailto:[email protected]> To: [email protected] Sent: Monday, March 01, 2010 6:20 AM Subject: Re: [soft_radio] need some help starting winrad 1.61 On 3/1/2010 3:31 AM, hank smith wrote: if you could tell me the commands fore winrad 1.33 and send me the exe file I could just run that Hank, you can download the installation package from this URL. It is not as simple as to replace an EXE file. You should execute the installer. http://www.sdrham.com/bin/Winrad_133b03_setupXP.exe Here following is the list of keyboard commands, which has been extracted from the Winrad User Guide that is placed into the installation directory by the installer when you execute it. 73 Alberto I2PHD --------------------------------------------------------------------- Keyboard shortcuts Winrad is mainly driven by the mouse, but some action can be performed also using the keyboard, as shown in the following list : * Ctrl-O opens an input windows where a new value for the LO frequency can be typed in * Ctrl-T opens an input windows where a new value for the Tune frequency can be typed in * Ctrl-A sets the demodulation mode to AM * Ctrl-E sets the demodulation mode to ECSS * Ctrl-U sets the demodulation mode to USB * Ctrl-L sets the demodulation mode to LSB * Ctrl-C sets the demodulation mode to CW * Ctrl-D sets the demodulation mode to DRM * Ctrl-R toggles the Noise Reduction on/off * Ctrl-P toggles the CW Peak on/off * Ctrl-B toggles the Noise Blanker on/off The key 'Z' alone is equivalent to a click on the "Zap" button. The key 'H' alone un-hides (if hidden) the GUI of the external I/O DLL (if it has one). The key 'C' alone sets the LO frequency equal to the Tune frequency, bringing that frequency at the center of the display. This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.
