Hello is the 995x the osilator or is this another sdr? if this is another sdr where do I get the 995x from? thanks Hank ----- Original Message ----- From: "Dave - WB6DHW" <brain...@wildblue.net> To: <soft_radio@yahoogroups.com>; "Chris Waldrup" <kd4...@arrl.net> Sent: Friday, April 30, 2010 1:00 AM Subject: Re: [soft_radio] new
> Hank: > If you are not interested in above 100 MHz, the 995x should work. > Chris Waldrup can be contacted at > Chris Waldrup <kd4...@arrl.net> > > hank smith wrote: >> can you tell me what he would charge to build the kit? also would he be >> able >> to build the ixternal osorlator to go below 1750? if not what second sdr >> do >> you suggest I purchase fore frequencies below 1750 khz? >> thanks fore the help >> <smiles> >> Hank >> ----- Original Message ----- >> From: "Dave - WB6DHW" <brain...@wildblue.net> >> To: <soft_radio@yahoogroups.com> >> Sent: Friday, April 30, 2010 12:03 AM >> Subject: Re: [soft_radio] new >> >> >> >>> Hank: >>> The kit is not pre-build. However, I do know someone(Chris Waldrup) >>> that will build it for a reasonable price. It will not tune below 1750 >>> KHz unless you use an external oscillator. >>> >>> Dave - WB6DHW >>> <http://wb6dhw.com> >>> >>> hank smith wrote: >>> >>>> will you also be allowing this kit pre built? >>>> also can it tune broadcasts from >>>> 530 khz to 1710 khz? >>>> also will this transmit or just recieve? >>>> thanks >>>> Hank >>>> ----- Original Message ----- >>>> From: "Dave - WB6DHW" <brain...@wildblue.net> >>>> To: <soft_radio@yahoogroups.com> >>>> Sent: Tuesday, April 27, 2010 11:00 PM >>>> Subject: Re: [soft_radio] new >>>> >>>> >>>> >>>> >>>>> BBS: >>>>> My UHFSDR board uses a Si570 and a divide be 2 circuit. It provides >>>>> a >>>>> receiver and low power exciter from 1.75 MHz to 1/2 the max frequency >>>>> of >>>>> the Si570. For a class A device, that would be 700 MHz. Information >>>>> is >>>>> on my "For_Sale" web page. Art, KY1K, will soon be offering a full >>>>> parts >>>>> kit(except the Si570 which is available as free samples from the >>>>> SiLabs >>>>> site). If you want to get your own parts, the pcb's are available >>>>> from >>>>> me. >>>>> >>>>> Dave - WB6DHW >>>>> <http://wb6dhw.com> >>>>> >>>>> BBS wrote: >>>>> >>>>> >>>>>> Hi I am a returning amateur and now trying to get my head round SDR. >>>>>> I >>>>>> think this subject is the most interesting but I have a few questions >>>>>> if anyone is in the mood to help. >>>>>> I am very interested in VHF &UHF & even SHF. >>>>>> Is there anything equipment wise so far that works well at those >>>>>> frequencies or am I a bit soon? >>>>>> Does the hardware have to cost a fortune? >>>>>> Thanks >>>>>> Ray >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>> ------------------------------------ >>>>> >>>>> Yahoo! Groups Links >>>>> >>>>> >>>>> >>>>> >>>>> >>>> >>>> >>>> >>>> >>> >>> ------------------------------------ >>> >>> Yahoo! Groups Links >>> >>> >>> >>> >> >> >> >> >> > > > > ------------------------------------ > > Yahoo! Groups Links > > >