Hi,
I'm rebuilding my VDR w/ Matrox G550 DVI and softdevice CVS from today.
More components:
vdr-1.4.1
ffmpeg CVS from today
DirectFB-1.0.0-rc1
DFB++-0.9.25
OpenSUSE 10.1 w/ kernel 2.6.16.13-4-default.
This setup used to work just fine until the root disk began to produce more
and more errors some time ago. The rest of the hardware is unchanged, as
well as fb.modes and directfbrc (as I documented on
http://www.vdr-wiki.de/wiki/index.php/Softdevice-plugin#Matrox_G550_mit_DVI-Ausgang_und_DirectFB).
softdevice audio decoding via ALSA / SPDIF works fine, no probs. Video
decoding doesn't product any output, and I get this "Out of video memory"
error that was mentioned here earlier. The error log is attached.
What gives? DFB only recognizes 16MB video RAM (the card has 32). But this
was similar when the setup worked back then, and was apparently no problem.
softdevice -vo vidix: sort of works, just the CPU load rises to nearly
100% after some time (~ 10 min or more) sometimes but it's at 22-25% most
of the time, and the console output (cursor blink) can be seen on the
screen. setterm doesn't help because I invoke runvdr from /etc/inittab,
and vdr isn't attached to a TTY anyway. So I'd prefer using DFB as I used
to.
So - what's wrong with the DFB setup?
TIA!
--
If everybody minded their own business, the world would go
around a deal faster.
-- The Duchess, "Through the Looking Glass"
[softdevice] processing args
[softdevice] argv [0] = softdevice
[softdevice] argv [1] = -ao
[softdevice] using PCM alsa device plug:spdif
[softdevice] using AC3 alsa device plug:spdif
[softdevice] argv [3] = -vo
[setup-softdevice] alsa ac3Mode set to: 1
[setup-softdevice] A/V Offset set to (0)
[setup-softdevice] Cropping 0 lines from bottom
[setup-softdevice] Cropping 0 columns from left
[setup-softdevice] cropping mode set to 0 (none)
[setup-softdevice] cropping mode toggle key set to 3 (User3)
[setup-softdevice] Cropping 0 columns from right
[setup-softdevice] Cropping 0 lines from top
[setup-softdevice] deinterlace method set to 1 lavc
[setup-softdevice] mainMenu: 0
[setup-softdevice] setting alpha blend mode to pseudo
[softdevice] picture mirroring set to 0 (off)
[setup-softdevice] pixel format set to (I420)
[setup-softdevice] shouldSuspend to: 0
[setup-softdevice] syncTimerMode: sig
[softdevice] UseStretchBlitset to off
[setup-softdevice] vidBrightness: 50
[setup-softdevice] vidContrast: 50
[setup-softdevice] vidHue: 50
[setup-softdevice] vidSaturation: 50
[setup-softdevice] startup aspect set to (4:3 normal)
[softdevice] initializing Plugin
[softdevice] Initializing Video Out
[softdevice] ffmpeg build(3346432)
[dfb] init
=======================| DirectFB 1.0.0-rc1 |=======================
(c) 2001-2006 United Cultures of Earth - go for outer space!
(c) 2000-2004 Convergence (integrated media) GmbH
----------------------------------------------------------------
(*) DirectFB/Core: Single Application Core. (2006-10-02 13:39)
(*) Direct/Memcpy: Using MMXEXT optimized memcpy()
(*) Direct/Thread: Running 'VT Switcher' (CRITICAL, 8587)...
(*) Direct/Modules: suppress module 'keyboard'
(*) Direct/Thread: Running 'LiRC Input' (INPUT, 8588)...
(*) DirectFB/Input: LIRC Device 0.2 (convergence integrated media GmbH)
(*) Direct/Thread: Running 'Linux Input' (INPUT, 8589)...
(*) DirectFB/Input: AT Translated Set 2 keyboard (1) 0.1 (convergence
integrated media GmbH)
(*) Direct/Thread: Running 'Linux Input' (INPUT, 8590)...
(*) DirectFB/Input: PC Speaker (2) 0.1 (convergence integrated media GmbH)
(*) Direct/Thread: Running 'Linux Input' (INPUT, 8591)...
(*) DirectFB/Input: Budget-CI dvb ir receiver saa71 (3) 0.1 (convergence
integrated media GmbH)
(*) DirectFB/Genefx: MMX detected and enabled
(*) DirectFB/Graphics: Matrox G550 0.7 (directfb.org)
(*) DirectFB/Core/WM: Default 0.2 (Convergence GmbH)
[dfb] RAM: 16777216 bytes
[dfb] Accellerated Functions: FillRectange DrawRectange DrawLine FillTriangle
Blit StretchBlit All
[dfb] Drawing Flags: Blend Src.premultiply
[dfb] Surface Blitting Flags: BlendAlpha BlendColorAlpha Colorize SrcColorkey
SrcPremultiply Deinterlace
[dfb] Supported video Modes are: [EMAIL PROTECTED]
[dfb] Enumerating display Layers
[dfb] Configuring CooperativeLevel for OSD
Layer 0 FBDev Primary Layer Type: graphics
Caps: brightness contrast saturation surface
Layer 1 Matrox Backend Scaler Type: graphics picture video
Caps: brightness contrast deinterlacing dst_colorkey screen_location surface
[dfb] (osdLayer): flags, options, pixelformat: 0000000f, 00000000 00418c04
[dfb] (osdLayer): width, height: 1280 720
[dfb] osdLayer without !! alpha channel
[surface capabilities] scrSurface: videoonly double-buffered flipping
PixelFormat = 0x00418c04
[dfb] width = 1280, height = 720
[dfb] got fmt = 0x00418c04 bpp = 32
[dfb] Using this layer for OSD: (FBDev Primary Layer - [1280x720])
[surface capabilities] osdSurface: videoonly double-buffered flipping
PixelFormat = 0x00418c04
[dfb] Configuring CooperativeLevel for Overlay
[surface capabilities] videoSurface: videoonly PixelFormat = 0x00200806
[dfb] Using this layer for OSD: FBDev Primary Layer
[dfb] Using this layer for Video out: Matrox Backend Scaler
[dfb] Display frame time is 16641 microseconds
[dfb] (re)configuring Videolayer to 720 x 576 (720x576)
[dfb]: Testconfiguration failed flags: 00000040 (disabling failed flags)
(!!!) *** WARNING [reallocation of video instance failed] ***
[surfaces.c:1635 in dfb_surface_reallocate_buffer()]
[dfb] SetParams:
action=IDirectFBDisplayLayer::SetConfiguration(DFBDisplayLayerConfig&),
result=Out of video memory!
[surface capabilities] videoSurface: videoonly double-buffered flipping
PixelFormat = 0x00200806
[dfb] (re)configured 0x08100609
[softdevice] Subplugin successfully opend
[softdevice] Video Out seems to be OK
[softdevice] Initializing Audio Out
[softdevice] Audio out seems to be OK
[softdevice] A/V devices initialized, now initializing MPEG2 Decoder
[dfb] (re)configuring Videolayer to 720 x 576 (720x576)
[dfb]: Testconfiguration failed flags: 00000040 (disabling failed flags)
(!!!) *** WARNING [reallocation of video instance failed] ***
[surfaces.c:1635 in dfb_surface_reallocate_buffer()]
[dfb] SetParams:
action=IDirectFBDisplayLayer::SetConfiguration(DFBDisplayLayerConfig&),
result=Out of video memory!
[surface capabilities] videoSurface: videoonly double-buffered flipping
PixelFormat = 0x00200806
[dfb] (re)configured 0x08100609
[dfb] YUV: action=IDirectFBSurface::Lock(DFBSurfaceLockFlags, void**, int*),
result=Object is suspended!
[dfb] YUV: action=IDirectFBSurface::Lock(DFBSurfaceLockFlags, void**, int*),
result=Object is suspended!
[dfb] YUV: action=IDirectFBSurface::Lock(DFBSurfaceLockFlags, void**, int*),
result=Object is suspended!
[dfb] YUV: action=IDirectFBSurface::Lock(DFBSurfaceLockFlags, void**, int*),
result=Object is suspended!
... many lines ...
[dfb] YUV: action=IDirectFBSurface::Lock(DFBSurfaceLockFlags, void**, int*),
result=Object is suspended!
[dfb] YUV: action=IDirectFBSurface::Lock(DFBSurfaceLockFlags, void**, int*),
result=Object is suspended!
[dfb] YUV: action=IDirectFBSurface::Lock(DFBSurfaceLockFlags, void**, int*),
result=Object is suspended!
[dfb] YUV: action=IDirectFBSurface::Lock(DFBSurfaceLockFlags, void**, int*),
result=Object is suspended!
Releasing DFB
_______________________________________________
Softdevice-devel mailing list
[email protected]
https://lists.berlios.de/mailman/listinfo/softdevice-devel
