Zitat von Harald Milz <[EMAIL PROTECTED]>: > Hi, > > I'm rebuilding my VDR w/ Matrox G550 DVI and softdevice CVS from today. > More components: > > vdr-1.4.1 > ffmpeg CVS from today > DirectFB-1.0.0-rc1 > DFB++-0.9.25 > OpenSUSE 10.1 w/ kernel 2.6.16.13-4-default. > > This setup used to work just fine until the root disk began to produce more > and more errors some time ago. The rest of the hardware is unchanged, as > well as fb.modes and directfbrc (as I documented on > http://www.vdr-wiki.de/wiki/index.php/Softdevice-plugin#Matrox_G550_mit_DVI-Ausgang_und_DirectFB). > > softdevice audio decoding via ALSA / SPDIF works fine, no probs. Video > decoding doesn't product any output, and I get this "Out of video memory" > error that was mentioned here earlier. The error log is attached. > > What gives? DFB only recognizes 16MB video RAM (the card has 32). But this > was similar when the setup worked back then, and was apparently no problem. > > > softdevice -vo vidix: sort of works, just the CPU load rises to nearly > 100% after some time (~ 10 min or more) sometimes but it's at 22-25% most > of the time, and the console output (cursor blink) can be seen on the > screen. setterm doesn't help because I invoke runvdr from /etc/inittab, > and vdr isn't attached to a TTY anyway. So I'd prefer using DFB as I used > to. > > So - what's wrong with the DFB setup?
I guess your kernel lacks matrox full memory patch. http://www.directfb.org/index.php/viewcvs.cgi/DirectFB/patches/ Stefan Lucke _______________________________________________ Softdevice-devel mailing list [email protected] https://lists.berlios.de/mailman/listinfo/softdevice-devel
