The C drive thing is a new one on me. The Send To option will only appear if the target application is installed on your system. But if you're running something like Maya off a network, you can set a couple of suite specific environment variables to enable the Send to commands.
G From: Jon Swindells <squi...@gmail.com<mailto:squi...@gmail.com>> Reply-To: "softimage@listproc.autodesk.com<mailto:softimage@listproc.autodesk.com>" <softimage@listproc.autodesk.com<mailto:softimage@listproc.autodesk.com>> Date: Wed, 9 Oct 2013 00:51:33 +0300 To: "softimage@listproc.autodesk.com<mailto:softimage@listproc.autodesk.com>" <softimage@listproc.autodesk.com<mailto:softimage@listproc.autodesk.com>> Subject: Re: OT: Softimage Cross Grade can't you just install to C: then move it afterwards and symlink it ? On 8 October 2013 23:38, Angus Davidson <angus.david...@wits.ac.za<mailto:angus.david...@wits.ac.za>> wrote: Hi Daniel over the years I have got int the habit of creating disk images of my installs I do the following One with just windows installed One with windows updated and drivers working (use this for testing new installs) One with windows and my Base apps installed (for things like soft I have one image with each of the major versions we used) Other then that I keep all of the other stuff on D drive so if I need to test a different version of Soft etc I can very easily (about 20 minutes) get back to the system I need without loosing any of my data on the other drives. While its a bit of a nutbuster to begin with its saved my hide and that of the students many a time. Kind regards Angus ________________________________ From: Daniel Brassard [dbrassar...@gmail.com<mailto:dbrassar...@gmail.com>] Sent: 08 October 2013 10:07 PM To: softimage@listproc.autodesk.com<mailto:softimage@listproc.autodesk.com> Subject: Re: OT: Softimage Cross Grade Thanks Luc-Eric for the advice. I would have installed the apps on the second partition (as an old habit, I normally reserve the c: drive for the OS and the d: for the apps) i will have to make sure the C: is big enough for the OS and the apps. Updating all the drivers at this moment before installing the apps. Should be good to go soon. Dan On Tue, Oct 8, 2013 at 1:33 PM, Luc-Eric Rousseau <luceri...@gmail.com<mailto:luceri...@gmail.com>> wrote: "send to" apparently doesn't work if the apps are not installed on the c: drive On Tue, Oct 8, 2013 at 12:36 PM, Daniel Brassard <dbrassar...@gmail.com<mailto:dbrassar...@gmail.com>> wrote: > Hello List, > > I took the opportunity to cross-grade from Softimage 2014 to the > Entertainment Creation Suite Ultimate over the weekend. I just received my > license and in the process of getting ready to install. > > Before I install the suite, any pitfall or issues I should be aware of or > that I should watch out? > > Thanks for your advice, its very much appreciated. -------------------------- To unsubscribe: mail softimage-requ...@listproc.autodesk.com<mailto:softimage-requ...@listproc.autodesk.com> with subject "unsubscribe" and reply to the confirmation email. This communication is intended for the addressee only. It is confidential. If you have received this communication in error, please notify us immediately and destroy the original message. You may not copy or disseminate this communication without the permission of the University. Only authorised signatories are competent to enter into agreements on behalf of the University and recipients are thus advised that the content of this message may not be legally binding on the University and may contain the personal views and opinions of the author, which are not necessarily the views and opinions of The University of the Witwatersrand, Johannesburg. All agreements between the University and outsiders are subject to South African Law unless the University agrees in writing to the contrary. -------------------------- To unsubscribe: mail softimage-requ...@listproc.autodesk.com<mailto:softimage-requ...@listproc.autodesk.com> with subject "unsubscribe" and reply to the confirmation email. -- Jon Swindells squi...@gmail.com<mailto:squi...@gmail.com> -------------------------- To unsubscribe: mail softimage-requ...@listproc.autodesk.com<mailto:softimage-requ...@listproc.autodesk.com> with subject "unsubscribe" and reply to the confirmation email.
<<attachment: winmail.dat>>
-------------------------- To unsubscribe: mail softimage-requ...@listproc.autodesk.com with subject "unsubscribe" and reply to the confirmation email.
