Hi Gerd,
The SR-LXv8.3 sells for $27 when mailed to a DX location. The price includes
DX postage.
The SR-LXv8.3 requires an Si570, eithere a CMOS or LVDS version will work,
which is not supplied in the kit. Four BPF module kits for the HF bands are
supplied in the kit and the PIC supplied is programmed to give the following
sixteen center frequencies for the DIP switch codes 0000 to 1111:
0
1.846
1
1.892
2
3.546
3
3.846
4
7.046
5
7.221
6
10.146
7
14.046
8
14.271
9
18.114
10
21.046
11
21.321
12
24.936
13
28.046
14
28.092
15
28.346
Thanks and 73,
Tony KB9YIG
----- Original Message -----
From: Gerd, DM2CDB
To: [email protected]
Sent: Saturday, May 03, 2008 3:51 AM
Subject: Re: [softrock40] SRLite+Xtall V8.3 Dimensions?
Hello Tony,
shouldn't one shorten softrock Lite+Xtall v8.3 to SR-LX v8.3? When and at
which price can one give orders up for the SR-LX v8.3?
73 de Gerd DM2CDB
From: Tony Parks
Sent: Saturday, May 03, 2008 5:32 AM
To: [email protected]
Subject: Re: [softrock40] SRLite+Xtall V8.3 Dimensions?
Hi David,
The v8.3 Lite+Xtall board is 2.1 inches by 1.6 inches. Four corner mounting
holes are in 0.125 inches from each side. With a BPF module plugged on top the
overall height should be less than 1 inch.
73,
Tony KB9YIG
----- Original Message -----
From: drmail377
To: [email protected]
Sent: Friday, May 02, 2008 10:18 PM
Subject: [softrock40] SRLite+Xtall V8.3 Dimensions?
What are the physical dimensions of a completed Lite+Xtall V8.3. Both
the main board and BPF board? Can't seem to find this on the site.
Thanks, David
