Hello Tony, thanks for message, money is on the way.
73 de Gerd DM2CDB From: Tony Parks Sent: Saturday, May 03, 2008 10:59 AM To: [email protected] Subject: Re: [softrock40] SRLite+Xtall V8.3 Dimensions? Hi Gerd, The SR-LXv8.3 sells for $27 when mailed to a DX location. The price includes DX postage. The SR-LXv8.3 requires an Si570, eithere a CMOS or LVDS version will work, which is not supplied in the kit. Four BPF module kits for the HF bands are supplied in the kit and the PIC supplied is programmed to give the following sixteen center frequencies for the DIP switch codes 0000 to 1111: 0 1.846 1 1.892 2 3.546 3 3.846 4 7.046 5 7.221 6 10.146 7 14.046 8 14.271 9 18.114 10 21.046 11 21.321 12 24.936 13 28.046 14 28.092 15 28.346 Thanks and 73, Tony KB9YIG ----- Original Message ----- From: Gerd, DM2CDB To: [email protected] Sent: Saturday, May 03, 2008 3:51 AM Subject: Re: [softrock40] SRLite+Xtall V8.3 Dimensions? Hello Tony, shouldn't one shorten softrock Lite+Xtall v8.3 to SR-LX v8.3? When and at which price can one give orders up for the SR-LX v8.3? 73 de Gerd DM2CDB From: Tony Parks Sent: Saturday, May 03, 2008 5:32 AM To: [email protected] Subject: Re: [softrock40] SRLite+Xtall V8.3 Dimensions? Hi David, The v8.3 Lite+Xtall board is 2.1 inches by 1.6 inches. Four corner mounting holes are in 0.125 inches from each side. With a BPF module plugged on top the overall height should be less than 1 inch. 73, Tony KB9YIG ----- Original Message ----- From: drmail377 To: [email protected] Sent: Friday, May 02, 2008 10:18 PM Subject: [softrock40] SRLite+Xtall V8.3 Dimensions? What are the physical dimensions of a completed Lite+Xtall V8.3. Both the main board and BPF board? Can't seem to find this on the site. Thanks, David
