Yes, I intend to do just that with the MC9S08QG8 controller. A little 8 pin header should work fine :-) But first I will run it with the PIC to make sure everything works real cool. I have had trouble controlling the WB6DHW board probably because of RF feedback and bad grounding on my part. But I don't think that will be a problem with the Lite+Xtall boards. Thanks again for providing this board :-)
km5h wrote: > > > If you remove the 12F683 and plug in a readily available 8 pin plug the > size of the removed chip, you have access to the SDA/SCL signals of the > SI570 on pins 3 and 2 and even the dip switches if you want to use them > for something. > -- Regards, John ========================================================= email: [EMAIL PROTECTED] photos: http://www.flickr.com/photos/k5jhf/sets/ videos: http://www.youtube.com/profile?user=k5jhf files: http://briefcase.yahoo.com/[EMAIL PROTECTED] web page: http://www.geocities.com/[EMAIL PROTECTED] call sign: K5JHF =========================================================
