Eric, I think you may achieve what you need by using a 30m SoftRock. Not sure about the Lite but the RxTx version has a 40.5 MHz crystal for the 30m band. You will need to change the 40.5 MHz crystal for a 36 MHz one. The input stage BPF may also need some re-adjustment to tune it to 9 MHz rather than 10 MHz.
Good luck, Elia M3ZHN --- In [email protected], Eric Rosenberg - W3DQ <[EMAIL PROTECTED]> wrote: > > I've been working with Ten Tec to figure out a way to get a decent > signal from the Orion to a SoftRock. > > Here's the latest: "The Orion has an output at 9MHz that is broad band > and you would only have to plug in a cable. That still requires a Soft > Rock at 9MHz to get I and Q.." > > 1st question.. is there a SoftRock that can do this? > 2nd question: I have a SRLite 450 MHz IF. Can I replace components to > turn it into a 9MHz IF version? If so, what gets changed? > > Thanks, > Eric W3DQ > Washington, DC >
