Thanks Tony, I think that should work.
73, John H. Long Jr. KW7A PO Box 567 East Carbon, Utah 84520 USA -------- Original Message -------- Subject: Re: [softrock40] Small additional run of SoftRock Lite kits will be available From: "Tony Parks" <[EMAIL PROTECTED]> Date: Thu, June 05, 2008 8:49 am To: <[email protected]> Hi John, The 10.7 MHz SoftRock Lite kit I supply uses a low-cost 14.318 MHz crystal to give a 1/3 sub-harmonic sampled center frequency of about 10.738 MHz, (3*14.318 / 4). If your soundcard can sample at 96 kHz the band coverage will be from 10.69 MHz to 10.786 MHz and should give good coverage of your IF output. Also, the oscillator frequency of the SoftRock will be well removed from your IF frequency. I think things will be in good shape if your soundcard can sample at 96 kHz. 73, Tony KB9YIG ----- Original Message ----- From: "John H. Long Jr." <[EMAIL PROTECTED]> To: <[email protected]> Sent: Thursday, June 05, 2008 10:00 AM Subject: RE: [softrock40] Small additional run of SoftRock Lite kits will be available > Tony, > > I ordered an IF kit for 10.695(?) MHz IF for the TS-2000. > Did I do wrong? > > Is the IF kit different than a normal SoftRock kit? > > Could the IF kit be made to work wit the external oscillator (XTal )? > > If I need the external oscillator how much additional do I owe you? > > > > > Thanks, > > > John H. Long Jr. > KW7A > PO Box 567 > East Carbon, Utah 84520 > USA > > > -------- Original Message -------- > Subject: Re: [softrock40] Small additional run of SoftRock Lite kits > will be available > From: "Tony Parks" <[EMAIL PROTECTED]> > Date: Thu, June 05, 2008 7:26 am > To: <[email protected]> > > Hi John, > > The SoftRock Lite could be used on 10m by use of 1/3 sub-harmonic > sampling. This would require a fundamental crystal at a frequency of 4 > / 3 the desired 10m center frequency. A 28.1 MHz center frequency, for > example, would require a fundamental crystal of 37.467 MHz. I have not > been able to find low-cost crystals suitable for 10m 1/3 sub-harmonic > sampling. > > 73, > Tony KB9YIG > > ----- Original Message ----- > From: John E > To: [email protected] > Sent: Thursday, June 05, 2008 9:15 AM > Subject: Re: [softrock40] Small additional run of SoftRock Lite kits > will be available > > > > Hi is a 10m going to be in the works? > John KØCQW > > kb9yig wrote: >> Good Evening All, >> >> A number of people have recently expressed an interest in the low-cost >> SoftRock Lite kit. Additional circuit boards went on order this >> evening to support a small run of the SoftRock Lite kits so that the >> kit will be available again by mid-June for a couple more months. >> >> The kit offering will include the following: >> >> Kits for individual bands from 160m through 30m will be $10 per kit. >> >> Upgraded kits for either 20m or 15m will be $12 per kit. >> >> Kits for special IF applications will be $12 per kit. >> >> Kits may be ordered via PayPal to raparks @ ctcisp.com (remove spaces >> around "@"). >> >> Thanks and 73, >> Tony KB9YIG >> >> >> > > > > > > > ------------------------------------ > > Yahoo! Groups Links > > > ------------------------------------ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/softrock40/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/softrock40/join (Yahoo! ID required) <*> To change settings via email: mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
