At 12:57 30/08/2003 -0600, you wrote: > >I replaced my rear 48 tooth sprocket with a 45 >tooth sprocket because the bike was revving a bit >too high at highway speeds. It now works just >fine. The only problem is that because I used a >smaller rear sprocket I had to adjust the rear >adjusters out all the way, and there's still just >a little more slack in the chain than I'd like. >
I think you can remove a link from the chain. >I'm thinking of going back to the 48 tooth >sprocket and replacing the stock 17 tooth front >sprocket with an 18 tooth sprocket. > >Will it fit? Yes. >Is there any reason I should not >use an 18 tooth front sprocket in a l970 CB750K0? > Not to my knowlege. Johnny-from-belgium
