> > I have an A1000 connected to an E-250 that has a failed disk in it - > part of a 3 disk raid 5 set. A new one is on the way. Looking in the > book for Raid Manager, I see there isn't too much information on what to do. > > Once I have the new disk in, does raid manager take care of any > formatting and data transfer etc necessary to get the disk back online > and into the raid?
Technically, no. All Raid manager does is report the status of the array to you. After the LUNs have been configured, the formatting/data transfer/etc. are all handled internally by the array itself. You should be able to click on the repair tool in rm6 and it will lead you through the steps of pulling out the old disk and replacing it with the new one. Don't do that until you have the new disk. -- Darren Dunham [EMAIL PROTECTED] Senior Technical Consultant TAOS http://www.taos.com/ Got some Dr Pepper? San Francisco, CA bay area < This line left intentionally blank to confuse you. > _______________________________________________ Solaris-Users mailing list [email protected] http://www.filibeto.org/mailman/listinfo/solaris-users
