Added: lucene/solr/trunk/src/test/test-files/solr/conf/solrconfig-master1.xml
URL:
http://svn.apache.org/viewvc/lucene/solr/trunk/src/test/test-files/solr/conf/solrconfig-master1.xml?rev=727319&view=auto
==============================================================================
--- lucene/solr/trunk/src/test/test-files/solr/conf/solrconfig-master1.xml
(added)
+++ lucene/solr/trunk/src/test/test-files/solr/conf/solrconfig-master1.xml Wed
Dec 17 01:19:26 2008
@@ -0,0 +1,98 @@
+<?xml version="1.0" ?>
+
+<!--
+ Licensed to the Apache Software Foundation (ASF) under one or more
+ contributor license agreements. See the NOTICE file distributed with
+ this work for additional information regarding copyright ownership.
+ The ASF licenses this file to You under the Apache License, Version 2.0
+ (the "License"); you may not use this file except in compliance with
+ the License. You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+-->
+
+<!-- $Id$
+ $Source$
+ $Name$
+ -->
+
+<config>
+
+ <dataDir>${solr.data.dir:./solr/data}</dataDir>
+
+ <indexDefaults>
+ <useCompoundFile>false</useCompoundFile>
+ <mergeFactor>10</mergeFactor>
+ <ramBufferSizeMB>32</ramBufferSizeMB>
+ <maxMergeDocs>2147483647</maxMergeDocs>
+ <maxFieldLength>10000</maxFieldLength>
+ <writeLockTimeout>1000</writeLockTimeout>
+ <commitLockTimeout>10000</commitLockTimeout>
+ <luceneAutoCommit>false</luceneAutoCommit>
+
+
<mergeScheduler>org.apache.lucene.index.ConcurrentMergeScheduler</mergeScheduler>
+ <writeLockTimeout>1000</writeLockTimeout>
+ <commitLockTimeout>10000</commitLockTimeout>
+
+ <lockType>single</lockType>
+ </indexDefaults>
+
+ <mainIndex>
+ <useCompoundFile>false</useCompoundFile>
+ <mergeFactor>10</mergeFactor>
+ <ramBufferSizeMB>32</ramBufferSizeMB>
+ <maxMergeDocs>2147483647</maxMergeDocs>
+ <maxFieldLength>10000</maxFieldLength>
+
+ <unlockOnStartup>true</unlockOnStartup>
+ </mainIndex>
+
+ <updateHandler class="solr.DirectUpdateHandler2">
+ </updateHandler>
+
+ <requestHandler name="standard" class="solr.StandardRequestHandler">
+ <bool name="httpCaching">true</bool>
+ </requestHandler>
+
+ <requestHandler name="/replication" class="solr.ReplicationHandler">
+ <lst name="master">
+ <str name="replicateAfter">commit</str>
+ <str name="confFiles">schema-replication2.xml:schema.xml</str>
+ </lst>
+ </requestHandler>
+
+ <!-- test query parameter defaults -->
+ <requestHandler name="defaults" class="solr.StandardRequestHandler">
+ <lst name="defaults">
+ <int name="rows">4</int>
+ <bool name="hl">true</bool>
+ <str name="hl.fl">text,name,subject,title,whitetok</str>
+ </lst>
+ </requestHandler>
+
+ <!-- test query parameter defaults -->
+ <requestHandler name="lazy" class="solr.StandardRequestHandler"
startup="lazy">
+ <lst name="defaults">
+ <int name="rows">4</int>
+ <bool name="hl">true</bool>
+ <str name="hl.fl">text,name,subject,title,whitetok</str>
+ </lst>
+ </requestHandler>
+
+ <requestHandler name="/update" class="solr.XmlUpdateRequestHandler"/>
+
+ <!-- enable streaming for testing... -->
+ <requestDispatcher handleSelect="true">
+ <requestParsers enableRemoteStreaming="true"
multipartUploadLimitInKB="2048"/>
+ <httpCaching lastModifiedFrom="openTime" etagSeed="Solr" never304="false">
+ <cacheControl>max-age=30, public</cacheControl>
+ </httpCaching>
+ </requestDispatcher>
+
+</config>
Propchange:
lucene/solr/trunk/src/test/test-files/solr/conf/solrconfig-master1.xml
------------------------------------------------------------------------------
svn:eol-style = native
Propchange:
lucene/solr/trunk/src/test/test-files/solr/conf/solrconfig-master1.xml
------------------------------------------------------------------------------
svn:keywords = Date Author Id Revision HeadURL
Modified: lucene/solr/trunk/src/test/test-files/solr/conf/solrconfig-slave.xml
URL:
http://svn.apache.org/viewvc/lucene/solr/trunk/src/test/test-files/solr/conf/solrconfig-slave.xml?rev=727319&r1=727318&r2=727319&view=diff
==============================================================================
--- lucene/solr/trunk/src/test/test-files/solr/conf/solrconfig-slave.xml
(original)
+++ lucene/solr/trunk/src/test/test-files/solr/conf/solrconfig-slave.xml Wed
Dec 17 01:19:26 2008
@@ -24,61 +24,17 @@
<config>
- <jmx />
-
- <!-- Used to specify an alternate directory to hold all index data.
- It defaults to "index" if not present, and should probably
- not be changed if replication is in use. -->
<dataDir>${solr.data.dir:./solr/data}</dataDir>
<indexDefaults>
- <!-- Values here affect all index writers and act as a default
- unless overridden. -->
- <!-- Values here affect all index writers and act as a default unless
overridden. -->
<useCompoundFile>false</useCompoundFile>
<mergeFactor>10</mergeFactor>
- <!-- If both ramBufferSizeMB and maxBufferedDocs is set, then Lucene will
flush based on whichever limit is hit first.
- -->
- <!--<maxBufferedDocs>1000</maxBufferedDocs>-->
- <!-- Tell Lucene when to flush documents to disk.
- Giving Lucene more memory for indexing means faster indexing at the cost
of more RAM
-
- If both ramBufferSizeMB and maxBufferedDocs is set, then Lucene will flush
based on whichever limit is hit first.
-
- -->
<ramBufferSizeMB>32</ramBufferSizeMB>
<maxMergeDocs>2147483647</maxMergeDocs>
<maxFieldLength>10000</maxFieldLength>
<writeLockTimeout>1000</writeLockTimeout>
<commitLockTimeout>10000</commitLockTimeout>
- <!--
- Expert: Turn on Lucene's auto commit capability.
-
- NOTE: Despite the name, this value does not have any relation to Solr's
autoCommit functionality
-
- -->
- <luceneAutoCommit>false</luceneAutoCommit>
-
- <!--
- Expert:
- The Merge Policy in Lucene controls how merging is handled by Lucene.
The default in 2.3 is the LogByteSizeMergePolicy, previous
- versions used LogDocMergePolicy.
-
- LogByteSizeMergePolicy chooses segments to merge based on their size.
The Lucene 2.2 default, LogDocMergePolicy chose when
- to merge based on number of documents
-
- Other implementations of MergePolicy must have a no-argument constructor
- -->
- <mergePolicy>org.apache.lucene.index.LogByteSizeMergePolicy</mergePolicy>
-
- <!--
- Expert:
- The Merge Scheduler in Lucene controls how merges are performed. The
ConcurrentMergeScheduler (Lucene 2.3 default)
- can perform merges in the background using separate threads. The
SerialMergeScheduler (Lucene 2.2 default) does not.
- -->
-
<mergeScheduler>org.apache.lucene.index.ConcurrentMergeScheduler</mergeScheduler>
- <!-- these are global... can't currently override per index -->
<writeLockTimeout>1000</writeLockTimeout>
<commitLockTimeout>10000</commitLockTimeout>
@@ -86,7 +42,6 @@
</indexDefaults>
<mainIndex>
- <!-- lucene options specific to the main on-disk lucene index -->
<useCompoundFile>false</useCompoundFile>
<mergeFactor>10</mergeFactor>
<ramBufferSizeMB>32</ramBufferSizeMB>
@@ -97,193 +52,11 @@
</mainIndex>
<updateHandler class="solr.DirectUpdateHandler2">
-
- <!-- autocommit pending docs if certain criteria are met
- <autoCommit>
- <maxDocs>10000</maxDocs>
- <maxTime>3600000</maxTime>
- </autoCommit>
- -->
- <!-- represents a lower bound on the frequency that commits may
- occur (in seconds). NOTE: not yet implemented
-
- <commitIntervalLowerBound>0</commitIntervalLowerBound>
- -->
-
- <!-- The RunExecutableListener executes an external command.
- exe - the name of the executable to run
- dir - dir to use as the current working directory. default="."
- wait - the calling thread waits until the executable returns.
default="true"
- args - the arguments to pass to the program. default=nothing
- env - environment variables to set. default=nothing
- -->
- <!-- A postCommit event is fired after every commit
- <listener event="postCommit" class="solr.RunExecutableListener">
- <str name="exe">/var/opt/resin3/__PORT__/scripts/solr/snapshooter</str>
- <str name="dir">/var/opt/resin3/__PORT__</str>
- <bool name="wait">true</bool>
- <arr name="args"> <str>arg1</str> <str>arg2</str> </arr>
- <arr name="env"> <str>MYVAR=val1</str> </arr>
- </listener>
- -->
-
-
</updateHandler>
-
- <query>
- <!-- Maximum number of clauses in a boolean query... can affect
- range or wildcard queries that expand to big boolean
- queries. An exception is thrown if exceeded.
- -->
- <maxBooleanClauses>1024</maxBooleanClauses>
-
-
- <!-- Cache specification for Filters or DocSets - unordered set of *all*
documents
- that match a particular query.
- -->
- <filterCache
- class="solr.search.LRUCache"
- size="512"
- initialSize="512"
- autowarmCount="256"/>
-
- <queryResultCache
- class="solr.search.LRUCache"
- size="512"
- initialSize="512"
- autowarmCount="1024"/>
-
- <documentCache
- class="solr.search.LRUCache"
- size="512"
- initialSize="512"
- autowarmCount="0"/>
-
- <!-- If true, stored fields that are not requested will be loaded lazily.
- -->
- <enableLazyFieldLoading>true</enableLazyFieldLoading>
-
- <!--
-
- <cache name="myUserCache"
- class="solr.search.LRUCache"
- size="4096"
- initialSize="1024"
- autowarmCount="1024"
- regenerator="MyRegenerator"
- />
- -->
-
-
- <useFilterForSortedQuery>true</useFilterForSortedQuery>
-
- <queryResultWindowSize>10</queryResultWindowSize>
-
- <!-- set maxSize artificially low to exercise both types of sets -->
- <HashDocSet maxSize="3" loadFactor="0.75"/>
-
-
- <!-- boolToFilterOptimizer converts boolean clauses with zero boost
- into cached filters if the number of docs selected by the clause
exceeds
- the threshold (represented as a fraction of the total index)
- -->
- <boolTofilterOptimizer enabled="false" cacheSize="32" threshold=".05"/>
-
-
- <!-- a newSearcher event is fired whenever a new searcher is being prepared
- and there is a current searcher handling requests (aka registered).
-->
- <!-- QuerySenderListener takes an array of NamedList and executes a
- local query request for each NamedList in sequence. -->
- <!--
- <listener event="newSearcher" class="solr.QuerySenderListener">
- <arr name="queries">
- <lst> <str name="q">solr</str> <str name="start">0</str> <str
name="rows">10</str> </lst>
- <lst> <str name="q">rocks</str> <str name="start">0</str> <str
name="rows">10</str> </lst>
- </arr>
- </listener>
- -->
-
- <!-- a firstSearcher event is fired whenever a new searcher is being
- prepared but there is no current registered searcher to handle
- requests or to gain prewarming data from. -->
- <!--
- <listener event="firstSearcher" class="solr.QuerySenderListener">
- <arr name="queries">
- <lst> <str name="q">fast_warm</str> <str name="start">0</str> <str
name="rows">10</str> </lst>
- </arr>
- </listener>
- -->
-
-
- </query>
-
-
- <!-- An alternate set representation that uses an integer hash to store
filters (sets of docids).
- If the set cardinality <= maxSize elements, then HashDocSet will be
used instead of the bitset
- based HashBitset. -->
-
- <!-- requestHandler plugins... incoming queries will be dispatched to the
- correct handler based on the qt (query type) param matching the
- name of registered handlers.
- The "standard" request handler is the default and will be used if qt
- is not specified in the request.
- -->
<requestHandler name="standard" class="solr.StandardRequestHandler">
- <bool name="httpCaching">true</bool>
- </requestHandler>
- <requestHandler name="dismaxOldStyleDefaults"
- class="solr.DisMaxRequestHandler" >
- <!-- for historic reasons, DisMaxRequestHandler will use all of
- it's init params as "defaults" if there is no "defaults" list
- specified
- -->
- <float name="tie">0.01</float>
- <str name="qf">
- text^0.5 features_t^1.0 subject^1.4 title_stemmed^2.0
- </str>
- <str name="pf">
- text^0.2 features_t^1.1 subject^1.4 title_stemmed^2.0 title^1.5
- </str>
- <str name="bf">
- ord(weight)^0.5 recip(rord(iind),1,1000,1000)^0.3
- </str>
- <str name="mm">
- 3<-1 5<-2 6<90%
- </str>
- <int name="ps">100</int>
+ <bool name="httpCaching">true</bool>
</requestHandler>
- <requestHandler name="dismax" class="solr.DisMaxRequestHandler" >
- <lst name="defaults">
- <str name="q.alt">*:*</str>
- <float name="tie">0.01</float>
- <str name="qf">
- text^0.5 features_t^1.0 subject^1.4 title_stemmed^2.0
- </str>
- <str name="pf">
- text^0.2 features_t^1.1 subject^1.4 title_stemmed^2.0 title^1.5
- </str>
- <str name="bf">
- ord(weight)^0.5 recip(rord(iind),1,1000,1000)^0.3
- </str>
- <str name="mm">
- 3<-1 5<-2 6<90%
- </str>
- <int name="ps">100</int>
- </lst>
- </requestHandler>
- <requestHandler name="old" class="solr.tst.OldRequestHandler" >
- <int name="myparam">1000</int>
- <float name="ratio">1.4142135</float>
- <arr name="myarr"><int>1</int><int>2</int></arr>
- <str>foo</str>
- </requestHandler>
- <requestHandler name="oldagain" class="solr.tst.OldRequestHandler" >
- <lst name="lst1"> <str name="op">sqrt</str> <int name="val">2</int> </lst>
- <lst name="lst2"> <str name="op">log</str> <float name="val">10</float>
</lst>
- </requestHandler>
-
- <requestHandler name="test" class="solr.tst.TestRequestHandler" />
<!-- test query parameter defaults -->
<requestHandler name="defaults" class="solr.StandardRequestHandler">
@@ -303,123 +76,22 @@
</lst>
</requestHandler>
- <requestHandler name="/update" class="solr.XmlUpdateRequestHandler"
/>
- <requestHandler name="/update/csv" class="solr.CSVRequestHandler"
startup="lazy">
- <bool name="httpCaching">false</bool>
- </requestHandler>
-
- <!-- test elevation -->
- <!--searchComponent name="elevate"
class="org.apache.solr.handler.component.QueryElevationComponent" >
- <str name="queryFieldType">string</str>
- <str name="config-file">elevate.xml</str>
- </searchComponent-->
-
- <requestHandler name="/elevate"
class="org.apache.solr.handler.component.SearchHandler">
- <lst name="defaults">
- <str name="echoParams">explicit</str>
- </lst>
- <arr name="last-components">
- <!--str>elevate</str-->
- </arr>
- </requestHandler>
+ <requestHandler name="/update" class="solr.XmlUpdateRequestHandler"/>
- <searchComponent name="spellcheck"
class="org.apache.solr.handler.component.SpellCheckComponent">
- <str name="queryAnalyzerFieldType">lowerfilt</str>
-
- <lst name="spellchecker">
- <str name="name">default</str>
- <str name="field">lowerfilt</str>
- <str name="spellcheckIndexDir">spellchecker1</str>
- <str name="buildOnCommit">true</str>
- </lst>
- <!-- Example of using different distance measure -->
- <lst name="spellchecker">
- <str name="name">jarowinkler</str>
- <str name="field">lowerfilt</str>
- <!-- Use a different Distance Measure -->
- <str
name="distanceMeasure">org.apache.lucene.search.spell.JaroWinklerDistance</str>
- <str name="spellcheckIndexDir">spellchecker2</str>
-
- </lst>
- <lst name="spellchecker">
- <str name="classname">solr.FileBasedSpellChecker</str>
- <str name="name">external</str>
- <str name="sourceLocation">spellings.txt</str>
- <str name="characterEncoding">UTF-8</str>
- <str name="spellcheckIndexDir">spellchecker3</str>
- </lst>
- </searchComponent>
- <!--
- The SpellingQueryConverter to convert raw (CommonParams.Q) queries into
tokens. Uses a simple regular expression
- to strip off field markup, boosts, ranges, etc. but it is not guaranteed to
match an exact parse from the query parser.
- -->
- <queryConverter name="queryConverter"
class="org.apache.solr.spelling.SpellingQueryConverter"/>
-
-<requestHandler name="/replication" class="solr.ReplicationHandler" >
+ <requestHandler name="/replication" class="solr.ReplicationHandler">
<lst name="slave">
- <str name="masterUrl">http://localhost:9999/solr/replication</str>
- <str name="pollInterval">00:00:01</str>
- </lst>
-</requestHandler>
-
-
- <requestHandler name="spellCheckCompRH"
class="org.apache.solr.handler.component.SearchHandler">
- <lst name="defaults">
- <!-- omp = Only More Popular -->
- <str name="spellcheck.onlyMorePopular">false</str>
- <!-- exr = Extended Results -->
- <str name="spellcheck.extendedResults">false</str>
- <!-- The number of suggestions to return -->
- <str name="spellcheck.count">1</str>
+ <str name="masterUrl">http://localhost:9999/solr/replication</str>
+ <str name="pollInterval">00:00:01</str>
</lst>
- <arr name="last-components">
- <str>spellcheck</str>
- </arr>
</requestHandler>
- <highlighting>
- <!-- Configure the standard fragmenter -->
- <fragmenter name="gap" class="org.apache.solr.highlight.GapFragmenter"
default="true">
- <lst name="defaults">
- <int name="hl.fragsize">100</int>
- </lst>
- </fragmenter>
-
- <fragmenter name="regex" class="org.apache.solr.highlight.RegexFragmenter">
- <lst name="defaults">
- <int name="hl.fragsize">70</int>
- </lst>
- </fragmenter>
-
- <!-- Configure the standard formatter -->
- <formatter name="html" class="org.apache.solr.highlight.HtmlFormatter"
default="true">
- <lst name="defaults">
- <str name="hl.simple.pre"><![CDATA[<em>]]></str>
- <str name="hl.simple.post"><![CDATA[</em>]]></str>
- </lst>
- </formatter>
- </highlighting>
-
<!-- enable streaming for testing... -->
- <requestDispatcher handleSelect="true" >
- <requestParsers enableRemoteStreaming="true"
multipartUploadLimitInKB="2048" />
+ <requestDispatcher handleSelect="true">
+ <requestParsers enableRemoteStreaming="true"
multipartUploadLimitInKB="2048"/>
<httpCaching lastModifiedFrom="openTime" etagSeed="Solr" never304="false">
<cacheControl>max-age=30, public</cacheControl>
</httpCaching>
</requestDispatcher>
- <admin>
- <defaultQuery>solr</defaultQuery>
- <gettableFiles>solrconfig.xml scheam.xml admin-extra.html</gettableFiles>
- </admin>
-
- <!-- test getting system property -->
- <propTest attr1="${solr.test.sys.prop1}-$${literal}"
-
attr2="${non.existent.sys.prop:default-from-config}">prefix-${solr.test.sys.prop2}-suffix</propTest>
-
- <queryParser name="foo" class="FooQParserPlugin"/>
-
-
-
</config>
