Okay, I went through the directions to change the server name and just deleted my distribution and kickstart and recreated them. But it still created them with localhost.localdomain.
What did I miss? P.S. I'd much rather it use IP address than hostname so I don't have to add DNS into the mix... On Fri, 2009-12-04 at 10:20 -0500, Robert Kuropkat wrote: > I haven't gone through the fix process yet, so apologies if it is > already answered there, but if it is pulling the server name > from /etc/hosts, how do I tell it to use the IP address instead? I was > hoping to avoid manually editing the kickstart files. > > > > On Fri, 2009-12-04 at 15:34 +0800, Colin Coe wrote: > > This will work with an IP address. I can say this with certainty as I > > was configuring my clients (via PXELinux configs) to use that > > Satellite server's IP not name. (The Satellite server had 3 active > > interfaces and three different names in DNS, don't ask :) ). > > > > CC > > > > On Fri, Dec 4, 2009 at 1:44 PM, Robert Kuropkat > > <[email protected]> wrote: > > > > > > P.S. Does that mean I can't do any of this by IP address? That would > > > require me to add DNS to the mix before I can go further. I can do > > > that, but I wanted to know what the smallest set of requirements I had > > > for each level of feature. > > > > > > > > > On Fri, 2009-12-04 at 12:28 +0800, Colin Coe wrote: > > >> Ahh, let me guess: In the /etc/hosts file on the Spacewalk server, the > > >> name of of the host is at the end of the '127.0.0.1' line? > > >> > > >> This will cause all kinds of grief. I've no idea why this is the > > >> default behavior but it is, in my overly opinionated opinion, an > > >> insane default. > > >> > > >> If this is indeed the case, I'd suggest fixing it and then follow the > > >> instructions at > > >> https://fedorahosted.org/spacewalk/wiki/How_to_rename_or_change_a_satellite_hostname > > >> > > >> HTH > > >> > > >> CC > > >> > > >> On 12/4/09, Robert Kuropkat <[email protected]> wrote: > > >> > > > >> > I don't have PXE, etc. setup yet, but I tried your suggestion of just > > >> > booting from a DVD and giving it the ks parameter. I think it almost > > >> > worked. I got the following error: > > >> > > > >> > "Unable to read package metadata. This may be due to a missing > > >> > repodata > > >> > directory. Please ensure that your install tree has been correctly > > >> > generated. Cannot retrieve reposutory metadata...." > > >> > > > >> > I believe this was because the kickstart file is littered with URLs > > >> > with > > >> > 'localhost.localdomain' in them. I was able to get one of the URLs to > > >> > change by hard coding the URL in the Kickstart -> Profiles -> System > > >> > Details -> Advanced options. But many other URLs still have the > > >> > localhost.localdomain in the URL. > > >> > > > >> > What is considered the preferred way to fix these? > > >> > > > >> > Robert Kuropkat > > >> > > > >> > > > >> > On Wed, 2009-11-25 at 08:11 +0800, Colin Coe wrote: > > >> > > Don't get too hung up on PXE. > > >> > > > > >> > > Spacewalk/Satellite can be configured as a DHCP/TFTP server which is > > >> > > used by the PXE client (server, Fedora desktop, whatever) to get an > > >> > > IP > > >> > > address and grab a kernel + initial ramdisk for booting the installer > > >> > > via TFTP. That's where PXE comes in. You could just as easily boot > > >> > > from a USB key or RHEL/Fedora CD/DVD and type "linux > > >> > > ks=http://spacewalk.server.com/ks/cfg/org/1/label/test-ks2 ip=1.2.3.4 > > >> > > etc" > > >> > > > > >> > > As for setting up the Kickstart trees, follow > > >> > > https://fedorahosted.org/spacewalk/wiki/HowToKickstartCobbler. I > > >> > > hate > > >> > > to admit it, but this process has gotten a lot more involved since > > >> > > v0.4 and is not as clear. Follow the instructions with the knowledge > > >> > > that 'this is what you have to do', understanding will come. > > >> > > > > >> > > The clear advantage of Satellite over Spacewalk is that sync'ing RHEL > > >> > > content is easy. If you have less than 50 physical nodes, my > > >> > > understanding is that special pricing is available from RedHat. One > > >> > > of my clients bought Satellite and they only had 20 or so physical > > >> > > boxes so they paid about a third of the Satellite retail price. > > >> > > YMMV. > > >> > > > > >> > > Spacewalk/Satellite will give you the automated installs you want but > > >> > > it will give you much more. The API set is huge and at a previous > > >> > > client site I tied the monitoring system and Satellite together so > > >> > > that any new Linux nodes were automatically added to the monitoring > > >> > > system. I choose not to your the inbuilt Satellite monitoring as it > > >> > > didn't easily do what I wanted (red light/green light monitoring, > > >> > > trending and alerting). What Satellite/Spacewalk can do is limitted > > >> > > by your imagination and coding skills. > > >> > > > > >> > > You can't make a RHEL ISO from the Satellite server although this is > > >> > > functionality I've requested in the past. I think the request was > > >> > > rejected as it also needed work done in Anaconda (the installer). > > >> > > > > >> > > Hope I've helped and not rambled to much (I have a habit of doing > > >> > > that) > > >> > > > > >> > > CC > > >> > > > > >> > > On Wed, Nov 25, 2009 at 7:34 AM, Robert Kuropkat > > >> > > <[email protected]> wrote: > > >> > > > > > >> > > > That's another thing I am not clear on yet, but I have more > > >> > > > reading to > > >> > > > do still. Does Spacewalk serve as a network (PXE) install server? > > >> > > > Or > > >> > > > does it just store the kickstart files? Or does it need the > > >> > > > kickstart > > >> > > > files to determine what packages to keep up to date on each server. > > >> > > > > > >> > > > My end goal is an automated install. Obviously, there are many > > >> > > > ways to > > >> > > > go about that, but I thought Spacewalk would provide automated > > >> > > > installs > > >> > > > as well as provide a useful foundation for on going maintenance. > > >> > > > > > >> > > > I'm not sure yet what my target environment will be, but suspect a > > >> > > > combination of being able to install/update over the network from > > >> > > > this > > >> > > > server, install from a CD (hopefully made from this server) and > > >> > > > install > > >> > > > from another Spacewalk server (or proxy) based on having to > > >> > > > sneaker net > > >> > > > files to it (thus my reason for wanting to understand how to setup > > >> > > > rpms > > >> > > > from CD even though I have a valid RHN account). > > >> > > > > > >> > > > Robert Kuropkat > > >> > > > > > >> > > > > > >> > > > On Wed, 2009-11-25 at 07:19 +0800, Colin Coe wrote: > > >> > > >> Just remember that putting RPMs into a channel is step one, you > > >> > > >> also > > >> > > >> need to get the kickstart trees into Spacewalk if you want to do > > >> > > >> provisioning (building systems). > > >> > > >> > > >> > > >> CC > > >> > > >> > > >> > > >> On Wed, Nov 25, 2009 at 6:46 AM, Robert Kuropkat > > >> > > >> <[email protected]> wrote: > > >> > > >> > > > >> > > >> > hehehe, I am starting to work that out :-) > > >> > > >> > > > >> > > >> > Right now I've hit pause on this for a couple more hours. I'm > > >> > > >> > tired of > > >> > > >> > Windows 7 blue screening on me and corrupting my VMs, so I am > > >> > > >> > trying to > > >> > > >> > get my Ubuntu partition functional. > > >> > > >> > > > >> > > >> > I hope to be back on this later tonight or tomorrow. > > >> > > >> > > > >> > > >> > Right now, I think I've been able to load the rpms from the iso > > >> > > >> > using > > >> > > >> > rhnpush and I used the web GUI to initiate a load of rpms from > > >> > > >> > the RHN > > >> > > >> > Extras site. This gave me about 6,000 rpms in this channel. > > >> > > >> > > > >> > > >> > Now, whether that did something useful or not, I'm not sure. > > >> > > >> > I'll try > > >> > > >> > to recreate it soon and see if I can subscribe a system to that > > >> > > >> > channel > > >> > > >> > and do updates. > > >> > > >> > > > >> > > >> > 'preciate all the help from everyone so far... > > >> > > >> > > > >> > > >> > Robert Kuropkat > > >> > > >> > > > >> > > >> > > > >> > > >> > On Wed, 2009-11-25 at 06:41 +0800, Colin Coe wrote: > > >> > > >> >> Robert, > > >> > > >> >> > > >> > > >> >> RHN Satellite != Spacewalk > > >> > > >> >> > > >> > > >> >> There are a lot of similarities but they are not the same, > > >> > > >> >> esp. when > > >> > > >> >> dealing with RHEL products. > > >> > > >> >> > > >> > > >> >> CC > > >> > > >> >> > > >> > > >> >> On Wed, Nov 25, 2009 at 12:33 AM, Robert Kuropkat > > >> > > >> >> <[email protected]> wrote: > > >> > > >> >> > > > >> > > >> >> > now see, that almost makes sense. It does not appear to be > > >> > > >> >> > what the > > >> > > >> >> > documentation actually says, though maybe I am misreading > > >> > > >> >> > it. it talks > > >> > > >> >> > about copying the files from the ISO and then goes right to > > >> > > >> >> > the > > >> > > >> >> > satellite-sync import. I'm on page 47 of the install guide > > >> > > >> >> > and rhnpush has > > >> > > >> >> > not even been mentioned yet. Perhaps the Channel Management > > >> > > >> >> > guide is more > > >> > > >> >> > detailed and I should skip to it... > > >> > > >> >> > > > >> > > >> >> > Robert Kuropkat > > >> > > >> >> > > > >> > > >> >> > > > >> > > >> >> > [email protected] wrote: > > >> > > >> >> >> > > >> > > >> >> >> The ISO's they are speaking of are the same one you > > >> > > >> >> >> downloaded on your > > >> > > >> >> >> first thread. > > >> > > >> >> >> > > >> > > >> >> >> They are saying that to save time, download the iso, mount > > >> > > >> >> >> it, and import > > >> > > >> >> >> into spacewalk via the rhnpush utility. > > >> > > >> >> >> > > >> > > >> >> >> This means it will not take as long to sync the channel > > >> > > >> >> >> from RHN via the > > >> > > >> >> >> rhnget command, because most of the packages are already > > >> > > >> >> >> there. > > >> > > >> >> >> > > >> > > >> >> >> > > >> > > >> >> >> > > >> > > >> >> >> > > >> > > >> >> >> ----- Original Message ----- > > >> > > >> >> >> From: [email protected] > > >> > > >> >> >> <[email protected]> > > >> > > >> >> >> To: [email protected] <[email protected]> > > >> > > >> >> >> Sent: Tue Nov 24 11:07:25 2009 > > >> > > >> >> >> Subject: Re: [Spacewalk-list] Initial load of Red Hat > > >> > > >> >> >> channel...? > > >> > > >> >> >> > > >> > > >> >> >> > > >> > > >> >> >> I still need to look into these packages. Last night I > > >> > > >> >> >> accidentally > > >> > > >> >> >> imported 3817 packages on accident, not exactly sure what. > > >> > > >> >> >> I guess part of > > >> > > >> >> >> what is irritating me is the following paragraph from the > > >> > > >> >> >> Satellite Server > > >> > > >> >> >> Installation guide: > > >> > > >> >> >> > > >> > > >> >> >> The Red Hat Network Channel Content ISOs or RHN Satellite > > >> > > >> >> >> Exporter data > > >> > > >> >> >> must be available, or the Satellite must have access to the > > >> > > >> >> >> Internet and the > > >> > > >> >> >> RHN website. > > >> > > >> >> >> > > >> > > >> >> >> Although it is possible to conduct the import directly from > > >> > > >> >> >> the RHN > > >> > > >> >> >> website, this should be done only if Channel Content ISOs > > >> > > >> >> >> are not available. > > >> > > >> >> >> It takes a long time to populate a channel from scratch > > >> > > >> >> >> over the Internet. > > >> > > >> >> >> For this reason, Red Hat urges you to use ISOs, if they are > > >> > > >> >> >> available, for > > >> > > >> >> >> initial import. > > >> > > >> >> >> > > >> > > >> >> >> So how the hell does one get the "Red hat Network Channel > > >> > > >> >> >> Content ISOs"? > > >> > > >> >> >> I have a valid RHN login but the iso's I download don't > > >> > > >> >> >> seem to have the > > >> > > >> >> >> Channel Content info? Or am I just on crack? I mean I try > > >> > > >> >> >> not to read > > >> > > >> >> >> documentation very often but would appreciate it to be > > >> > > >> >> >> correct when I do > > >> > > >> >> >> bother... :-) > > >> > > >> >> >> > > >> > > >> >> >> Robert > > >> > > >> >> >> > > >> > > >> >> >> > > >> > > >> >> >> [email protected] wrote: > > >> > > >> >> >> > > >> > > >> >> >>> > > >> > > >> >> >>> Look into rhnget and gensystemid from the mrepo package. > > >> > > >> >> >>> > > >> > > >> >> >>> > > >> > > >> >> >>> You can use that to sync the rhel rpms locally, then use > > >> > > >> >> >>> rhnpush to > > >> > > >> >> >>> import into spacewalk. > > >> > > >> >> >>> > > >> > > >> >> >>> > > >> > > >> >> >>> > > >> > > >> >> >>> > > >> > > >> >> >>> > > >> > > >> >> >>> > > >> > > >> >> >>> ----- Original Message ----- > > >> > > >> >> >>> From: [email protected] > > >> > > >> >> >>> <[email protected]> > > >> > > >> >> >>> To: [email protected] <[email protected]> > > >> > > >> >> >>> Sent: Mon Nov 23 21:37:40 2009 > > >> > > >> >> >>> Subject: Re: [Spacewalk-list] Initial load of Red Hat > > >> > > >> >> >>> channel...? > > >> > > >> >> >>> > > >> > > >> >> >>> > > >> > > >> >> >>> yea, in the little reading I recall on it, I gave it a > > >> > > >> >> >>> confused dog look > > >> > > >> >> >>> and just hoped I did not really need that. So I'll look a > > >> > > >> >> >>> little harder at > > >> > > >> >> >>> it unless this other thing actually works accidentally. > > >> > > >> >> >>> But it sounds like > > >> > > >> >> >>> even though I am getting nearly 4,000 packages it is still > > >> > > >> >> >>> only part of what > > >> > > >> >> >>> I need. > > >> > > >> >> >>> > > >> > > >> >> >>> Thanks for the info... > > >> > > >> >> >>> > > >> > > >> >> >>> > > >> > > >> >> >>> Colin Coe wrote: > > >> > > >> >> >>> > > >> > > >> >> >>>> > > >> > > >> >> >>>> I didn't like mrepo as: > > >> > > >> >> >>>> a) I didn't find it at all intuitive > > >> > > >> >> >>>> b) unless you do some fancy scripting you end up all the > > >> > > >> >> >>>> RHEL (and/or > > >> > > >> >> >>>> EPEL) content twice on your filesystem > > >> > > >> >> >>>> > > >> > > >> >> >>>> CC > > >> > > >> >> >>>> > > >> > > >> >> >>>> On Tue, Nov 24, 2009 at 10:24 AM, Robert Kuropkat > > >> > > >> >> >>>> <[email protected]> wrote: > > >> > > >> >> >>>> > > >> > > >> >> >>>>> > > >> > > >> >> >>>>> hmmm... Well that makes a little more sense I guess. I > > >> > > >> >> >>>>> think it did/is > > >> > > >> >> >>>>> syncing the epel repo, which is of course not what I > > >> > > >> >> >>>>> wanted but would > > >> > > >> >> >>>>> imply > > >> > > >> >> >>>>> that process would work if I can dredge up the correct > > >> > > >> >> >>>>> url. > > >> > > >> >> >>>>> > > >> > > >> >> >>>>> I did see something about spacewalk-repo-sync but I > > >> > > >> >> >>>>> think that requires > > >> > > >> >> >>>>> a > > >> > > >> >> >>>>> URL as well, not local media. > > >> > > >> >> >>>>> > > >> > > >> >> >>>>> I do seem to have a sync process running, so I am not > > >> > > >> >> >>>>> sure if it is > > >> > > >> >> >>>>> because > > >> > > >> >> >>>>> I clicked on the sync button multiple times or what. > > >> > > >> >> >>>>> Nothing is > > >> > > >> >> >>>>> showing up > > >> > > >> >> >>>>> in the Schedule tab in Space walk under pending, failed, > > >> > > >> >> >>>>> completed or > > >> > > >> >> >>>>> archived so I don't really understand what state this > > >> > > >> >> >>>>> process is in. > > >> > > >> >> >>>>> There > > >> > > >> >> >>>>> is a /var/log/rhn/rhn_taskomatic_daemon.log file that is > > >> > > >> >> >>>>> showing a lot > > >> > > >> >> >>>>> of > > >> > > >> >> >>>>> hibernate and java null pointer errors so that does not > > >> > > >> >> >>>>> seem promising. > > >> > > >> >> >>>>> > > >> > > >> >> >>>>> Actually, it looks like something might be happening > > >> > > >> >> >>>>> now, I might have > > >> > > >> >> >>>>> just > > >> > > >> >> >>>>> been impatient. There is now file in > > >> > > >> >> >>>>> /var/log/rhn/reposync that is > > >> > > >> >> >>>>> growing > > >> > > >> >> >>>>> and shoes 754/3817.... and my little VM has gotten > > >> > > >> >> >>>>> sluggish as hell. > > >> > > >> >> >>>>> So > > >> > > >> >> >>>>> maybe it is downloading everything for a complete RH 5.2? > > >> > > >> >> >>>>> > > >> > > >> >> >>>>> Of course, that kinda sucks because I was about to give > > >> > > >> >> >>>>> up and go home. > > >> > > >> >> >>>>> Now > > >> > > >> >> >>>>> I have to stay and wait it out :-/ > > >> > > >> >> >>>>> > > >> > > >> >> >>>>> Robert > > >> > > >> >> >>>>> > > >> > > >> >> >>>>> P.S. What is mrepo and what did you not like about it? > > >> > > >> >> >>>>> I thought I > > >> > > >> >> >>>>> saw > > >> > > >> >> >>>>> that mentioned somewhere in my reading but don't recall > > >> > > >> >> >>>>> now... > > >> > > >> >> >>>>> > > >> > > >> >> >>>>> > > >> > > >> >> >>>>> > > >> > > >> >> >>>>> Colin Coe wrote: > > >> > > >> >> >>>>> > > >> > > >> >> >>>>>> > > >> > > >> >> >>>>>> My understanding is that satellite-sync does not work > > >> > > >> >> >>>>>> with Sapcewalk > > >> > > >> >> >>>>>> but I'm not 100% on that. > > >> > > >> >> >>>>>> > > >> > > >> >> >>>>>> http://download.fedora.redhat.com/pub/epel/5/i386/ is > > >> > > >> >> >>>>>> the location for > > >> > > >> >> >>>>>> EPEL (Extra Packages for Enterprise Linux), not for > > >> > > >> >> >>>>>> RHEL. > > >> > > >> >> >>>>>> > > >> > > >> >> >>>>>> a minute or two after clicking sync repo, do a 'ps -ef > > >> > > >> >> >>>>>> | grep sync' to > > >> > > >> >> >>>>>> see if you have any spacewalk-repo-sync processes > > >> > > >> >> >>>>>> running. I think > > >> > > >> >> >>>>>> the logs are under /var/satellite/sync_repo or > > >> > > >> >> >>>>>> something similar. > > >> > > >> >> >>>>>> > > >> > > >> >> >>>>>> I ended up using mrepo to do this but I was less than > > >> > > >> >> >>>>>> happy with it. > > >> > > >> >> >>>>>> > > >> > > >> >> >>>>>> CC > > >> > > >> >> >>>>>> > > >> > > >> >> >>>>>> On Tue, Nov 24, 2009 at 9:51 AM, Robert Kuropkat > > >> > > >> >> >>>>>> <[email protected]> wrote: > > >> > > >> >> >>>>>> > > >> > > >> >> >>>>>> > > >> > > >> >> >>>>>>> > > >> > > >> >> >>>>>>> I seem to be missing something obvious. I've > > >> > > >> >> >>>>>>> installed Red Hat 5.2 > > >> > > >> >> >>>>>>> (in a > > >> > > >> >> >>>>>>> VirtualBox VM) and installed Spacewalk. Now I need to > > >> > > >> >> >>>>>>> create my > > >> > > >> >> >>>>>>> first > > >> > > >> >> >>>>>>> channel. I downloaded Red Hat 5.2 and copied the ISO > > >> > > >> >> >>>>>>> to the file > > >> > > >> >> >>>>>>> system > > >> > > >> >> >>>>>>> and > > >> > > >> >> >>>>>>> tried: > > >> > > >> >> >>>>>>> > > >> > > >> >> >>>>>>> satellite-sync --list-channels --mount-point > > >> > > >> >> >>>>>>> /var/rhn-sat-import/rhel > > >> > > >> >> >>>>>>> > > >> > > >> >> >>>>>>> It fails saying it is unable to process file > > >> > > >> >> >>>>>>> /var/rhn-sat-import/rhel/channel_families/channel_families.xml > > >> > > >> >> >>>>>>> > > >> > > >> >> >>>>>>> Sure enough, that file is not there. I read the > > >> > > >> >> >>>>>>> documentation on how > > >> > > >> >> >>>>>>> to > > >> > > >> >> >>>>>>> get > > >> > > >> >> >>>>>>> the channel iso but it only gives me an iso without > > >> > > >> >> >>>>>>> the channel > > >> > > >> >> >>>>>>> information. > > >> > > >> >> >>>>>>> The documentation does not seem to exactly describe > > >> > > >> >> >>>>>>> the web ui > > >> > > >> >> >>>>>>> navigation > > >> > > >> >> >>>>>>> through the RHN web site so I'm not sure if the > > >> > > >> >> >>>>>>> documentation is > > >> > > >> >> >>>>>>> slightly > > >> > > >> >> >>>>>>> out of date and I am guessing wrong, or if there is > > >> > > >> >> >>>>>>> some other detail > > >> > > >> >> >>>>>>> I > > >> > > >> >> >>>>>>> am > > >> > > >> >> >>>>>>> missing. > > >> > > >> >> >>>>>>> > > >> > > >> >> >>>>>>> I do also see the URL for repo sync in Spacewalk, but > > >> > > >> >> >>>>>>> don't > > >> > > >> >> >>>>>>> understand > > >> > > >> >> >>>>>>> what > > >> > > >> >> >>>>>>> the URL should be for Red hat version 5.2. I put in > > >> > > >> >> >>>>>>> this: > > >> > > >> >> >>>>>>> > > >> > > >> >> >>>>>>> http://download.fedora.redhat.com/pub/epel/5/i386/ > > >> > > >> >> >>>>>>> > > >> > > >> >> >>>>>>> And it said repository sync scheduled, but I see no > > >> > > >> >> >>>>>>> evidence it > > >> > > >> >> >>>>>>> actually > > >> > > >> >> >>>>>>> did > > >> > > >> >> >>>>>>> anything... okay wait, before I hit send I went and > > >> > > >> >> >>>>>>> looked again and > > >> > > >> >> >>>>>>> it > > >> > > >> >> >>>>>>> does look like it did something, just not what I > > >> > > >> >> >>>>>>> wanted it to. So > > >> > > >> >> >>>>>>> maybe > > >> > > >> >> >>>>>>> the > > >> > > >> >> >>>>>>> URL above is just incorrect? How do I setup a local > > >> > > >> >> >>>>>>> Red Hat 5.2 > > >> > > >> >> >>>>>>> repo? > > >> > > >> >> >>>>>>> > > >> > > >> >> >>>>>>> Any help appreciated. > > >> > > >> >> >>>>>>> > > >> > > >> >> >>>>>>> Robert Kuropkat > > >> > > >> >> >>>>>>> > > >> > > >> >> >>>>>>> _______________________________________________ > > >> > > >> >> >>>>>>> Spacewalk-list mailing list > > >> > > >> >> >>>>>>> [email protected] > > >> > > >> >> >>>>>>> https://www.redhat.com/mailman/listinfo/spacewalk-list > > >> > > >> >> >>>>>>> > > >> > > >> >> >>>>>>> > > >> > > >> >> >>>>>>> > > >> > > >> >> >>>>>> > > >> > > >> >> >>>>>> > > >> > > >> >> >>>>> > > >> > > >> >> >>>>> _______________________________________________ > > >> > > >> >> >>>>> Spacewalk-list mailing list > > >> > > >> >> >>>>> [email protected] > > >> > > >> >> >>>>> https://www.redhat.com/mailman/listinfo/spacewalk-list > > >> > > >> >> >>>>> > > >> > > >> >> >>>>> > > >> > > >> >> >>>> > > >> > > >> >> >>>> > > >> > > >> >> >>> > > >> > > >> >> >>> _______________________________________________ > > >> > > >> >> >>> Spacewalk-list mailing list > > >> > > >> >> >>> [email protected] > > >> > > >> >> >>> https://www.redhat.com/mailman/listinfo/spacewalk-list > > >> > > >> >> >>> > > >> > > >> >> >>> _______________________________________________ > > >> > > >> >> >>> Spacewalk-list mailing list > > >> > > >> >> >>> [email protected] > > >> > > >> >> >>> https://www.redhat.com/mailman/listinfo/spacewalk-list > > >> > > >> >> >>> > > >> > > >> >> >> > > >> > > >> >> >> _______________________________________________ > > >> > > >> >> >> Spacewalk-list mailing list > > >> > > >> >> >> [email protected] > > >> > > >> >> >> https://www.redhat.com/mailman/listinfo/spacewalk-list > > >> > > >> >> >> > > >> > > >> >> >> _______________________________________________ > > >> > > >> >> >> Spacewalk-list mailing list > > >> > > >> >> >> [email protected] > > >> > > >> >> >> https://www.redhat.com/mailman/listinfo/spacewalk-list > > >> > > >> >> >> > > >> > > >> >> > > > >> > > >> >> > _______________________________________________ > > >> > > >> >> > Spacewalk-list mailing list > > >> > > >> >> > [email protected] > > >> > > >> >> > https://www.redhat.com/mailman/listinfo/spacewalk-list > > >> > > >> >> > > > >> > > >> >> > > >> > > >> >> > > >> > > >> >> > > >> > > >> > > > >> > > >> > > > >> > > >> > _______________________________________________ > > >> > > >> > Spacewalk-list mailing list > > >> > > >> > [email protected] > > >> > > >> > https://www.redhat.com/mailman/listinfo/spacewalk-list > > >> > > >> > > > >> > > >> > > >> > > >> > > >> > > >> > > >> > > > > > >> > > > > > >> > > > _______________________________________________ > > >> > > > Spacewalk-list mailing list > > >> > > > [email protected] > > >> > > > https://www.redhat.com/mailman/listinfo/spacewalk-list > > >> > > > > > >> > > > > >> > > > > >> > > > > >> > > > >> > > > >> > _______________________________________________ > > >> > Spacewalk-list mailing list > > >> > [email protected] > > >> > https://www.redhat.com/mailman/listinfo/spacewalk-list > > >> > > > >> > > >> > > > > > > > > > _______________________________________________ > > > Spacewalk-list mailing list > > > [email protected] > > > https://www.redhat.com/mailman/listinfo/spacewalk-list > > > > > > > > > > > -- > > RHCE#805007969328369 > > > > _______________________________________________ > > Spacewalk-list mailing list > > [email protected] > > https://www.redhat.com/mailman/listinfo/spacewalk-list > > _______________________________________________ Spacewalk-list mailing list [email protected] https://www.redhat.com/mailman/listinfo/spacewalk-list
