Actually, I think found it. I changed cobblerDOThost in /etc/sysconfig/rhn-satellite-prep and did my distribution and kickstart profile. Quick inspection looks like that worked, but I have not tested it yet...
On Tue, 2009-12-08 at 09:52 +1100, Jason Ball wrote: > A pre-install script to change the address should work. > > > for example: > > > /usr/bin/sed -e 's/localhost.localdomain/999.999.999.999/' > < /tmp/ks.cfg > > /tmp/ks.cfg.nobase /usr/bin/mv /tmp/ks.cfg.nobase /tmp/ks.cfg > > > Make sure you flag the script as nochroot and it _should_ work. > > > Cheers > J. > > > > On Tue, Dec 8, 2009 at 9:09 AM, Robert Kuropkat > <[email protected]> wrote: > > Okay, I went through the directions to change the server name > and just > deleted my distribution and kickstart and recreated them. But > it still > created them with localhost.localdomain. > > What did I miss? > > P.S. I'd much rather it use IP address than hostname so I > don't have to > add DNS into the mix... > > > > On Fri, 2009-12-04 at 10:20 -0500, Robert Kuropkat wrote: > > I haven't gone through the fix process yet, so apologies if > it is > > already answered there, but if it is pulling the server name > > from /etc/hosts, how do I tell it to use the IP address > instead? I was > > hoping to avoid manually editing the kickstart files. > > > > > > > > On Fri, 2009-12-04 at 15:34 +0800, Colin Coe wrote: > > > This will work with an IP address. I can say this with > certainty as I > > > was configuring my clients (via PXELinux configs) to use > that > > > Satellite server's IP not name. (The Satellite server had > 3 active > > > interfaces and three different names in DNS, don't ask > :) ). > > > > > > CC > > > > > > On Fri, Dec 4, 2009 at 1:44 PM, Robert Kuropkat > > > <[email protected]> wrote: > > > > > > > > P.S. Does that mean I can't do any of this by IP > address? That would > > > > require me to add DNS to the mix before I can go > further. I can do > > > > that, but I wanted to know what the smallest set of > requirements I had > > > > for each level of feature. > > > > > > > > > > > > On Fri, 2009-12-04 at 12:28 +0800, Colin Coe wrote: > > > >> Ahh, let me guess: In the /etc/hosts file on the > Spacewalk server, the > > > >> name of of the host is at the end of the '127.0.0.1' > line? > > > >> > > > >> This will cause all kinds of grief. I've no idea why > this is the > > > >> default behavior but it is, in my overly opinionated > opinion, an > > > >> insane default. > > > >> > > > >> If this is indeed the case, I'd suggest fixing it and > then follow the > > > >> instructions at > > > >> > > https://fedorahosted.org/spacewalk/wiki/How_to_rename_or_change_a_satellite_hostname > > > >> > > > >> HTH > > > >> > > > >> CC > > > >> > > > >> On 12/4/09, Robert Kuropkat <[email protected]> > wrote: > > > >> > > > > >> > I don't have PXE, etc. setup yet, but I tried your > suggestion of just > > > >> > booting from a DVD and giving it the ks parameter. I > think it almost > > > >> > worked. I got the following error: > > > >> > > > > >> > "Unable to read package metadata. This may be due to > a missing repodata > > > >> > directory. Please ensure that your install tree has > been correctly > > > >> > generated. Cannot retrieve reposutory metadata...." > > > >> > > > > >> > I believe this was because the kickstart file is > littered with URLs with > > > >> > 'localhost.localdomain' in them. I was able to get > one of the URLs to > > > >> > change by hard coding the URL in the Kickstart -> > Profiles -> System > > > >> > Details -> Advanced options. But many other URLs > still have the > > > >> > localhost.localdomain in the URL. > > > >> > > > > >> > What is considered the preferred way to fix these? > > > >> > > > > >> > Robert Kuropkat > > > >> > > > > >> > > > > >> > On Wed, 2009-11-25 at 08:11 +0800, Colin Coe wrote: > > > >> > > Don't get too hung up on PXE. > > > >> > > > > > >> > > Spacewalk/Satellite can be configured as a > DHCP/TFTP server which is > > > >> > > used by the PXE client (server, Fedora desktop, > whatever) to get an IP > > > >> > > address and grab a kernel + initial ramdisk for > booting the installer > > > >> > > via TFTP. That's where PXE comes in. You could > just as easily boot > > > >> > > from a USB key or RHEL/Fedora CD/DVD and type > "linux > > > >> > > > ks=http://spacewalk.server.com/ks/cfg/org/1/label/test-ks2 > ip=1.2.3.4 > > > >> > > etc" > > > >> > > > > > >> > > As for setting up the Kickstart trees, follow > > > >> > > > https://fedorahosted.org/spacewalk/wiki/HowToKickstartCobbler. I hate > > > >> > > to admit it, but this process has gotten a lot more > involved since > > > >> > > v0.4 and is not as clear. Follow the instructions > with the knowledge > > > >> > > that 'this is what you have to do', understanding > will come. > > > >> > > > > > >> > > The clear advantage of Satellite over Spacewalk is > that sync'ing RHEL > > > >> > > content is easy. If you have less than 50 physical > nodes, my > > > >> > > understanding is that special pricing is available > from RedHat. One > > > >> > > of my clients bought Satellite and they only had 20 > or so physical > > > >> > > boxes so they paid about a third of the Satellite > retail price. YMMV. > > > >> > > > > > >> > > Spacewalk/Satellite will give you the automated > installs you want but > > > >> > > it will give you much more. The API set is huge > and at a previous > > > >> > > client site I tied the monitoring system and > Satellite together so > > > >> > > that any new Linux nodes were automatically added > to the monitoring > > > >> > > system. I choose not to your the inbuilt Satellite > monitoring as it > > > >> > > didn't easily do what I wanted (red light/green > light monitoring, > > > >> > > trending and alerting). What Satellite/Spacewalk > can do is limitted > > > >> > > by your imagination and coding skills. > > > >> > > > > > >> > > You can't make a RHEL ISO from the Satellite server > although this is > > > >> > > functionality I've requested in the past. I think > the request was > > > >> > > rejected as it also needed work done in Anaconda > (the installer). > > > >> > > > > > >> > > Hope I've helped and not rambled to much (I have a > habit of doing that) > > > >> > > > > > >> > > CC > > > >> > > > > > >> > > On Wed, Nov 25, 2009 at 7:34 AM, Robert Kuropkat > > > >> > > <[email protected]> wrote: > > > >> > > > > > > >> > > > That's another thing I am not clear on yet, but I > have more reading to > > > >> > > > do still. Does Spacewalk serve as a network > (PXE) install server? Or > > > >> > > > does it just store the kickstart files? Or does > it need the kickstart > > > >> > > > files to determine what packages to keep up to > date on each server. > > > >> > > > > > > >> > > > My end goal is an automated install. Obviously, > there are many ways to > > > >> > > > go about that, but I thought Spacewalk would > provide automated installs > > > >> > > > as well as provide a useful foundation for on > going maintenance. > > > >> > > > > > > >> > > > I'm not sure yet what my target environment will > be, but suspect a > > > >> > > > combination of being able to install/update over > the network from this > > > >> > > > server, install from a CD (hopefully made from > this server) and install > > > >> > > > from another Spacewalk server (or proxy) based on > having to sneaker net > > > >> > > > files to it (thus my reason for wanting to > understand how to setup rpms > > > >> > > > from CD even though I have a valid RHN account). > > > >> > > > > > > >> > > > Robert Kuropkat > > > >> > > > > > > >> > > > > > > >> > > > On Wed, 2009-11-25 at 07:19 +0800, Colin Coe > wrote: > > > >> > > >> Just remember that putting RPMs into a channel > is step one, you also > > > >> > > >> need to get the kickstart trees into Spacewalk > if you want to do > > > >> > > >> provisioning (building systems). > > > >> > > >> > > > >> > > >> CC > > > >> > > >> > > > >> > > >> On Wed, Nov 25, 2009 at 6:46 AM, Robert Kuropkat > > > >> > > >> <[email protected]> wrote: > > > >> > > >> > > > > >> > > >> > hehehe, I am starting to work that out :-) > > > >> > > >> > > > > >> > > >> > Right now I've hit pause on this for a couple > more hours. I'm tired of > > > >> > > >> > Windows 7 blue screening on me and corrupting > my VMs, so I am trying to > > > >> > > >> > get my Ubuntu partition functional. > > > >> > > >> > > > > >> > > >> > I hope to be back on this later tonight or > tomorrow. > > > >> > > >> > > > > >> > > >> > Right now, I think I've been able to load the > rpms from the iso using > > > >> > > >> > rhnpush and I used the web GUI to initiate a > load of rpms from the RHN > > > >> > > >> > Extras site. This gave me about 6,000 rpms in > this channel. > > > >> > > >> > > > > >> > > >> > Now, whether that did something useful or not, > I'm not sure. I'll try > > > >> > > >> > to recreate it soon and see if I can subscribe > a system to that channel > > > >> > > >> > and do updates. > > > >> > > >> > > > > >> > > >> > 'preciate all the help from everyone so far... > > > >> > > >> > > > > >> > > >> > Robert Kuropkat > > > >> > > >> > > > > >> > > >> > > > > >> > > >> > On Wed, 2009-11-25 at 06:41 +0800, Colin Coe > wrote: > > > >> > > >> >> Robert, > > > >> > > >> >> > > > >> > > >> >> RHN Satellite != Spacewalk > > > >> > > >> >> > > > >> > > >> >> There are a lot of similarities but they are > not the same, esp. when > > > >> > > >> >> dealing with RHEL products. > > > >> > > >> >> > > > >> > > >> >> CC > > > >> > > >> >> > > > >> > > >> >> On Wed, Nov 25, 2009 at 12:33 AM, Robert > Kuropkat > > > >> > > >> >> <[email protected]> wrote: > > > >> > > >> >> > > > > >> > > >> >> > now see, that almost makes sense. It does > not appear to be what the > > > >> > > >> >> > documentation actually says, though maybe I > am misreading it. it talks > > > >> > > >> >> > about copying the files from the ISO and > then goes right to the > > > >> > > >> >> > satellite-sync import. I'm on page 47 of > the install guide and rhnpush has > > > >> > > >> >> > not even been mentioned yet. Perhaps the > Channel Management guide is more > > > >> > > >> >> > detailed and I should skip to it... > > > >> > > >> >> > > > > >> > > >> >> > Robert Kuropkat > > > >> > > >> >> > > > > >> > > >> >> > > > > >> > > >> >> > [email protected] wrote: > > > >> > > >> >> >> > > > >> > > >> >> >> The ISO's they are speaking of are the > same one you downloaded on your > > > >> > > >> >> >> first thread. > > > >> > > >> >> >> > > > >> > > >> >> >> They are saying that to save time, > download the iso, mount it, and import > > > >> > > >> >> >> into spacewalk via the rhnpush utility. > > > >> > > >> >> >> > > > >> > > >> >> >> This means it will not take as long to > sync the channel from RHN via the > > > >> > > >> >> >> rhnget command, because most of the > packages are already there. > > > >> > > >> >> >> > > > >> > > >> >> >> > > > >> > > >> >> >> > > > >> > > >> >> >> > > > >> > > >> >> >> ----- Original Message ----- > > > >> > > >> >> >> From: [email protected] > > > >> > > >> >> >> <[email protected]> > > > >> > > >> >> >> To: [email protected] > <[email protected]> > > > >> > > >> >> >> Sent: Tue Nov 24 11:07:25 2009 > > > >> > > >> >> >> Subject: Re: [Spacewalk-list] Initial load > of Red Hat channel...? > > > >> > > >> >> >> > > > >> > > >> >> >> > > > >> > > >> >> >> I still need to look into these packages. > Last night I accidentally > > > >> > > >> >> >> imported 3817 packages on accident, not > exactly sure what. I guess part of > > > >> > > >> >> >> what is irritating me is the following > paragraph from the Satellite Server > > > >> > > >> >> >> Installation guide: > > > >> > > >> >> >> > > > >> > > >> >> >> The Red Hat Network Channel Content ISOs > or RHN Satellite Exporter data > > > >> > > >> >> >> must be available, or the Satellite must > have access to the Internet and the > > > >> > > >> >> >> RHN website. > > > >> > > >> >> >> > > > >> > > >> >> >> Although it is possible to conduct the > import directly from the RHN > > > >> > > >> >> >> website, this should be done only if > Channel Content ISOs are not available. > > > >> > > >> >> >> It takes a long time to populate a channel > from scratch over the Internet. > > > >> > > >> >> >> For this reason, Red Hat urges you to use > ISOs, if they are available, for > > > >> > > >> >> >> initial import. > > > >> > > >> >> >> > > > >> > > >> >> >> So how the hell does one get the "Red hat > Network Channel Content ISOs"? > > > >> > > >> >> >> I have a valid RHN login but the iso's I > download don't seem to have the > > > >> > > >> >> >> Channel Content info? Or am I just on > crack? I mean I try not to read > > > >> > > >> >> >> documentation very often but would > appreciate it to be correct when I do > > > >> > > >> >> >> bother... :-) > > > >> > > >> >> >> > > > >> > > >> >> >> Robert > > > >> > > >> >> >> > > > >> > > >> >> >> > > > >> > > >> >> >> [email protected] wrote: > > > >> > > >> >> >> > > > >> > > >> >> >>> > > > >> > > >> >> >>> Look into rhnget and gensystemid from the > mrepo package. > > > >> > > >> >> >>> > > > >> > > >> >> >>> > > > >> > > >> >> >>> You can use that to sync the rhel rpms > locally, then use rhnpush to > > > >> > > >> >> >>> import into spacewalk. > > > >> > > >> >> >>> > > > >> > > >> >> >>> > > > >> > > >> >> >>> > > > >> > > >> >> >>> > > > >> > > >> >> >>> > > > >> > > >> >> >>> > > > >> > > >> >> >>> ----- Original Message ----- > > > >> > > >> >> >>> From: [email protected] > > > >> > > >> >> >>> <[email protected]> > > > >> > > >> >> >>> To: [email protected] > <[email protected]> > > > >> > > >> >> >>> Sent: Mon Nov 23 21:37:40 2009 > > > >> > > >> >> >>> Subject: Re: [Spacewalk-list] Initial > load of Red Hat channel...? > > > >> > > >> >> >>> > > > >> > > >> >> >>> > > > >> > > >> >> >>> yea, in the little reading I recall on > it, I gave it a confused dog look > > > >> > > >> >> >>> and just hoped I did not really need > that. So I'll look a little harder at > > > >> > > >> >> >>> it unless this other thing actually works > accidentally. But it sounds like > > > >> > > >> >> >>> even though I am getting nearly 4,000 > packages it is still only part of what > > > >> > > >> >> >>> I need. > > > >> > > >> >> >>> > > > >> > > >> >> >>> Thanks for the info... > > > >> > > >> >> >>> > > > >> > > >> >> >>> > > > >> > > >> >> >>> Colin Coe wrote: > > > >> > > >> >> >>> > > > >> > > >> >> >>>> > > > >> > > >> >> >>>> I didn't like mrepo as: > > > >> > > >> >> >>>> a) I didn't find it at all intuitive > > > >> > > >> >> >>>> b) unless you do some fancy scripting > you end up all the RHEL (and/or > > > >> > > >> >> >>>> EPEL) content twice on your filesystem > > > >> > > >> >> >>>> > > > >> > > >> >> >>>> CC > > > >> > > >> >> >>>> > > > >> > > >> >> >>>> On Tue, Nov 24, 2009 at 10:24 AM, Robert > Kuropkat > > > >> > > >> >> >>>> <[email protected]> wrote: > > > >> > > >> >> >>>> > > > >> > > >> >> >>>>> > > > >> > > >> >> >>>>> hmmm... Well that makes a little more > sense I guess. I think it did/is > > > >> > > >> >> >>>>> syncing the epel repo, which is of > course not what I wanted but would > > > >> > > >> >> >>>>> imply > > > >> > > >> >> >>>>> that process would work if I can dredge > up the correct url. > > > >> > > >> >> >>>>> > > > >> > > >> >> >>>>> I did see something about > spacewalk-repo-sync but I think that requires > > > >> > > >> >> >>>>> a > > > >> > > >> >> >>>>> URL as well, not local media. > > > >> > > >> >> >>>>> > > > >> > > >> >> >>>>> I do seem to have a sync process > running, so I am not sure if it is > > > >> > > >> >> >>>>> because > > > >> > > >> >> >>>>> I clicked on the sync button multiple > times or what. Nothing is > > > >> > > >> >> >>>>> showing up > > > >> > > >> >> >>>>> in the Schedule tab in Space walk under > pending, failed, completed or > > > >> > > >> >> >>>>> archived so I don't really understand > what state this process is in. > > > >> > > >> >> >>>>> There > > > >> > > >> >> >>>>> is > a /var/log/rhn/rhn_taskomatic_daemon.log file that is showing > a lot > > > >> > > >> >> >>>>> of > > > >> > > >> >> >>>>> hibernate and java null pointer errors > so that does not seem promising. > > > >> > > >> >> >>>>> > > > >> > > >> >> >>>>> Actually, it looks like something might > be happening now, I might have > > > >> > > >> >> >>>>> just > > > >> > > >> >> >>>>> been impatient. There is now file > in /var/log/rhn/reposync that is > > > >> > > >> >> >>>>> growing > > > >> > > >> >> >>>>> and shoes 754/3817.... and my little VM > has gotten sluggish as hell. > > > >> > > >> >> >>>>> So > > > >> > > >> >> >>>>> maybe it is downloading everything for > a complete RH 5.2? > > > >> > > >> >> >>>>> > > > >> > > >> >> >>>>> Of course, that kinda sucks because I > was about to give up and go home. > > > >> > > >> >> >>>>> Now > > > >> > > >> >> >>>>> I have to stay and wait it out :-/ > > > >> > > >> >> >>>>> > > > >> > > >> >> >>>>> Robert > > > >> > > >> >> >>>>> > > > >> > > >> >> >>>>> P.S. What is mrepo and what did you > not like about it? I thought I > > > >> > > >> >> >>>>> saw > > > >> > > >> >> >>>>> that mentioned somewhere in my reading > but don't recall now... > > > >> > > >> >> >>>>> > > > >> > > >> >> >>>>> > > > >> > > >> >> >>>>> > > > >> > > >> >> >>>>> Colin Coe wrote: > > > >> > > >> >> >>>>> > > > >> > > >> >> >>>>>> > > > >> > > >> >> >>>>>> My understanding is that > satellite-sync does not work with Sapcewalk > > > >> > > >> >> >>>>>> but I'm not 100% on that. > > > >> > > >> >> >>>>>> > > > >> > > >> >> >>>>>> > http://download.fedora.redhat.com/pub/epel/5/i386/ is the > location for > > > >> > > >> >> >>>>>> EPEL (Extra Packages for Enterprise > Linux), not for RHEL. > > > >> > > >> >> >>>>>> > > > >> > > >> >> >>>>>> a minute or two after clicking sync > repo, do a 'ps -ef | grep sync' to > > > >> > > >> >> >>>>>> see if you have any > spacewalk-repo-sync processes running. I think > > > >> > > >> >> >>>>>> the logs are > under /var/satellite/sync_repo or something similar. > > > >> > > >> >> >>>>>> > > > >> > > >> >> >>>>>> I ended up using mrepo to do this but > I was less than happy with it. > > > >> > > >> >> >>>>>> > > > >> > > >> >> >>>>>> CC > > > >> > > >> >> >>>>>> > > > >> > > >> >> >>>>>> On Tue, Nov 24, 2009 at 9:51 AM, > Robert Kuropkat > > > >> > > >> >> >>>>>> <[email protected]> wrote: > > > >> > > >> >> >>>>>> > > > >> > > >> >> >>>>>> > > > >> > > >> >> >>>>>>> > > > >> > > >> >> >>>>>>> I seem to be missing something > obvious. I've installed Red Hat 5.2 > > > >> > > >> >> >>>>>>> (in a > > > >> > > >> >> >>>>>>> VirtualBox VM) and installed > Spacewalk. Now I need to create my > > > >> > > >> >> >>>>>>> first > > > >> > > >> >> >>>>>>> channel. I downloaded Red Hat 5.2 > and copied the ISO to the file > > > >> > > >> >> >>>>>>> system > > > >> > > >> >> >>>>>>> and > > > >> > > >> >> >>>>>>> tried: > > > >> > > >> >> >>>>>>> > > > >> > > >> >> >>>>>>> satellite-sync --list-channels > --mount-point /var/rhn-sat-import/rhel > > > >> > > >> >> >>>>>>> > > > >> > > >> >> >>>>>>> It fails saying it is unable to > process file > > > >> > > >> >> > >>>>>>> /var/rhn-sat-import/rhel/channel_families/channel_families.xml > > > >> > > >> >> >>>>>>> > > > >> > > >> >> >>>>>>> Sure enough, that file is not there. > I read the documentation on how > > > >> > > >> >> >>>>>>> to > > > >> > > >> >> >>>>>>> get > > > >> > > >> >> >>>>>>> the channel iso but it only gives me > an iso without the channel > > > >> > > >> >> >>>>>>> information. > > > >> > > >> >> >>>>>>> The documentation does not seem to > exactly describe the web ui > > > >> > > >> >> >>>>>>> navigation > > > >> > > >> >> >>>>>>> through the RHN web site so I'm not > sure if the documentation is > > > >> > > >> >> >>>>>>> slightly > > > >> > > >> >> >>>>>>> out of date and I am guessing wrong, > or if there is some other detail > > > >> > > >> >> >>>>>>> I > > > >> > > >> >> >>>>>>> am > > > >> > > >> >> >>>>>>> missing. > > > >> > > >> >> >>>>>>> > > > >> > > >> >> >>>>>>> I do also see the URL for repo sync > in Spacewalk, but don't > > > >> > > >> >> >>>>>>> understand > > > >> > > >> >> >>>>>>> what > > > >> > > >> >> >>>>>>> the URL should be for Red hat version > 5.2. I put in this: > > > >> > > >> >> >>>>>>> > > > >> > > >> >> >>>>>>> > http://download.fedora.redhat.com/pub/epel/5/i386/ > > > >> > > >> >> >>>>>>> > > > >> > > >> >> >>>>>>> And it said repository sync > scheduled, but I see no evidence it > > > >> > > >> >> >>>>>>> actually > > > >> > > >> >> >>>>>>> did > > > >> > > >> >> >>>>>>> anything... okay wait, before I hit > send I went and looked again and > > > >> > > >> >> >>>>>>> it > > > >> > > >> >> >>>>>>> does look like it did something, just > not what I wanted it to. So > > > >> > > >> >> >>>>>>> maybe > > > >> > > >> >> >>>>>>> the > > > >> > > >> >> >>>>>>> URL above is just incorrect? How do > I setup a local Red Hat 5.2 > > > >> > > >> >> >>>>>>> repo? > > > >> > > >> >> >>>>>>> > > > >> > > >> >> >>>>>>> Any help appreciated. > > > >> > > >> >> >>>>>>> > > > >> > > >> >> >>>>>>> Robert Kuropkat > > > >> > > >> >> >>>>>>> > > > >> > > >> >> >>>>>>> > _______________________________________________ > > > >> > > >> >> >>>>>>> Spacewalk-list mailing list > > > >> > > >> >> >>>>>>> [email protected] > > > >> > > >> >> >>>>>>> > https://www.redhat.com/mailman/listinfo/spacewalk-list > > > >> > > >> >> >>>>>>> > > > >> > > >> >> >>>>>>> > > > >> > > >> >> >>>>>>> > > > >> > > >> >> >>>>>> > > > >> > > >> >> >>>>>> > > > >> > > >> >> >>>>> > > > >> > > >> >> >>>>> > _______________________________________________ > > > >> > > >> >> >>>>> Spacewalk-list mailing list > > > >> > > >> >> >>>>> [email protected] > > > >> > > >> >> >>>>> > https://www.redhat.com/mailman/listinfo/spacewalk-list > > > >> > > >> >> >>>>> > > > >> > > >> >> >>>>> > > > >> > > >> >> >>>> > > > >> > > >> >> >>>> > > > >> > > >> >> >>> > > > >> > > >> >> >>> > _______________________________________________ > > > >> > > >> >> >>> Spacewalk-list mailing list > > > >> > > >> >> >>> [email protected] > > > >> > > >> >> >>> > https://www.redhat.com/mailman/listinfo/spacewalk-list > > > >> > > >> >> >>> > > > >> > > >> >> >>> > _______________________________________________ > > > >> > > >> >> >>> Spacewalk-list mailing list > > > >> > > >> >> >>> [email protected] > > > >> > > >> >> >>> > https://www.redhat.com/mailman/listinfo/spacewalk-list > > > >> > > >> >> >>> > > > >> > > >> >> >> > > > >> > > >> >> >> > _______________________________________________ > > > >> > > >> >> >> Spacewalk-list mailing list > > > >> > > >> >> >> [email protected] > > > >> > > >> >> >> > https://www.redhat.com/mailman/listinfo/spacewalk-list > > > >> > > >> >> >> > > > >> > > >> >> >> > _______________________________________________ > > > >> > > >> >> >> Spacewalk-list mailing list > > > >> > > >> >> >> [email protected] > > > >> > > >> >> >> > https://www.redhat.com/mailman/listinfo/spacewalk-list > > > >> > > >> >> >> > > > >> > > >> >> > > > > >> > > >> >> > > _______________________________________________ > > > >> > > >> >> > Spacewalk-list mailing list > > > >> > > >> >> > [email protected] > > > >> > > >> >> > > https://www.redhat.com/mailman/listinfo/spacewalk-list > > > >> > > >> >> > > > > >> > > >> >> > > > >> > > >> >> > > > >> > > >> >> > > > >> > > >> > > > > >> > > >> > > > > >> > > >> > > _______________________________________________ > > > >> > > >> > Spacewalk-list mailing list > > > >> > > >> > [email protected] > > > >> > > >> > > https://www.redhat.com/mailman/listinfo/spacewalk-list > > > >> > > >> > > > > >> > > >> > > > >> > > >> > > > >> > > >> > > > >> > > > > > > >> > > > > > > >> > > > _______________________________________________ > > > >> > > > Spacewalk-list mailing list > > > >> > > > [email protected] > > > >> > > > > https://www.redhat.com/mailman/listinfo/spacewalk-list > > > >> > > > > > > >> > > > > > >> > > > > > >> > > > > > >> > > > > >> > > > > >> > _______________________________________________ > > > >> > Spacewalk-list mailing list > > > >> > [email protected] > > > >> > > https://www.redhat.com/mailman/listinfo/spacewalk-list > > > >> > > > > >> > > > >> > > > > > > > > > > > > _______________________________________________ > > > > Spacewalk-list mailing list > > > > [email protected] > > > > https://www.redhat.com/mailman/listinfo/spacewalk-list > > > > > > > > > > > > > > > > -- > > > RHCE#805007969328369 > > > > > > _______________________________________________ > > > Spacewalk-list mailing list > > > [email protected] > > > https://www.redhat.com/mailman/listinfo/spacewalk-list > > > > > > > _______________________________________________ > Spacewalk-list mailing list > [email protected] > https://www.redhat.com/mailman/listinfo/spacewalk-list > > > > > -- > The era of procrastination, of half measures of soothing and baffling > expedients, of delays, is coming to an end. In it's place we are > entering a period of consequences. - Winston Churchill > <a > href=http://www.climatecrisis.net/downloads/ecards/preview-glacier1.html>An > Inconvenient Truth</a> > > _______________________________________________ > Spacewalk-list mailing list > [email protected] > https://www.redhat.com/mailman/listinfo/spacewalk-list _______________________________________________ Spacewalk-list mailing list [email protected] https://www.redhat.com/mailman/listinfo/spacewalk-list
