Georges, you can configure more than one community on a Cisco device. It will work with Spectrum. It seems to be a Cisco Works Problem.
Did you change the community which is used by Cisco Works? We had this problem after changing communities. We had to reinitialize Cisco Works DFM Database. Regards Andreas From: Georges Touma [mailto:[EMAIL PROTECTED] Sent: Thursday, November 20, 2008 11:45 AM To: spectrum Subject: [spectrum] Spectrum and Ciscoworks Hello Gurus, We are using Spectrum to monitor Cisco routers. On each router, we have two snmp communities set: 1-Read/Write also configured in the model in spectrum 2-Read only used in CiscoWorks We are continuously getting an authentication alarm sourced from the CiscoWorks host and we are sure that the CiscoWork Snmp community is set correctly on ciscoworks. It does not seem that I can configure two communities for the model in spectrum... Did anyone face this? Any ideas what would be causing this? Best regards, --- Georges Touma System and Network Specialist NavLink |* http://www.navlink.com<http://www.navlink.com/> |* [EMAIL PROTECTED]<mailto:[EMAIL PROTECTED]> |* +966 1 4522647 |( +966 50 3310725 * --To unsubscribe from spectrum, send email to [EMAIL PROTECTED]<mailto:[EMAIL PROTECTED]> with the body: unsubscribe spectrum [EMAIL PROTECTED] --- To unsubscribe from spectrum, send email to [EMAIL PROTECTED] with the body: unsubscribe spectrum [EMAIL PROTECTED]
