Im starting to use NCM on version 8.1. I get an error saying that "The operation completed but SS was unable to open the transfer file". I cant see the captured file under the host configuration tab, probably due to the error mess. The export to txt file does not work either. The config is captured and placed under the tftp folder by the name SCM_0x403540. Anyone knowing what the problem is, or what I have missed. Regards Jan-Erik
________________________________ Från: William W Denig [mailto:[EMAIL PROTECTED] Skickat: den 9 december 2008 18:49 Till: spectrum Kopia: spectrum Ämne: Re: [spectrum] Authorization Failure traps for APC devices I started getting occasional "Authorization Failure" traps from our Cisco switches some time back. Says the SpectroSERVER is the cause. Haven't had time to track it down. Bill From: Brett Davis <[EMAIL PROTECTED]> To: "spectrum" <[email protected]> Date: 12/09/2008 11:39 AM Subject: [spectrum] Authorization Failure traps for APC devices ________________________________ We're having an interesting issue where between 1:00AM and 3:00AM in the morning, we're getting about 40 "Authorization Failure" trap alarms from our APC power supplies showing up in Spectrum, and it's the SpectroServer that's causing them. I can't seem to track down what might be causing this action, as they are not having configs pulled down by NCM, and I can't think of any other process that might try to use a different community string to poll them. Has anyone ever had anything similar happen? -- Brett Davis IT Network and Security Operations Cisco Certified Network Associate (CCNA) Purdue University YONG 605 Phone (765) 49-62304 [EMAIL PROTECTED] * --To unsubscribe from spectrum, send email to [EMAIL PROTECTED] with the body: unsubscribe spectrum [EMAIL PROTECTED] --- To unsubscribe from spectrum, send email to [EMAIL PROTECTED] with the body: unsubscribe spectrum [EMAIL PROTECTED]
