Hello All, Have anyone installed Spectrum in a SAN(EMC) under Solaris? configuring the Disk Drives similar to this?:
Disk1 = OS + SwapSpace/Virtual Memory Disk2 = SS components (being this the SAN partition) Disregarding of course, the possible implications of having the SPECROOT in a SAN partition (SAN failure), what I want to know is, if it is supported, because in the installation manuals doesn't say anything about this. Regards to all, Eng. Edgar Parra MCSE, MCSA, MCP, CA's Spectrum Solutions Engineer 2009/3/4 <[email protected]> > > > Karen Kedda > Enterprise Monitoring Solutions > Berkley Technology Services LLC > > [email protected] > > > *[email protected]* > > 03/03/2009 11:29 AMPlease respond to > [email protected] > > To > "spectrum" <[email protected]> > cc > "spectrum" <[email protected]> > Subject > Re: [spectrum] Spectrum fault tolerance > > > > > > Omar, > > Back up the primary SS and copy the <dbsavefile> to the secondary SS in the > ./SS directory. For a hot standby, you'll want to add > secondary_polling=yesin the ./SS/.vnmrc file on the secondary SS. > You need to load the database on the secondary SS but give it a different > precedence: > > ../SS-Tools/SSdbload -il -add 20 <dbsavefile> > > Once you've loaded the db on the secondary server, start the spectroserver. > Run a MapUpdate -view > > > ./MapUpdate -view > Connecting to Location Server running at: SPEC01 port 0xdaff > > Landscape Service Type Name IP Address Hostname > Port Prec Flags > --------- ------------------ --------------- ------------------------ > ------ ---- ----- > 0x100000 Landscape Default 10.1.1.1 SPEC01 > 0xbeef 10 0 > 0x100000 Landscape 10.1.1.1 SPEC01 > 0xbeef 10 0 > 0x100000 Stats 10.1.1.1 SPEC01 > 0xbafe 10 0 > 0x100000 Landscape Default 10.1.1.2 SPEC02 > 0xbeef 20 0 <---- Secondary SS > 0x100000 Landscape 10.1.1.2 SPEC02 > 0xbeef 20 0 <---- Secondary SS > 0x100000 Events 10.1.1.1 SPEC01 > 0xbafe 10 0 > > After you have both SS's running, you'll want to test that the database > backup on the primary SS is syncing with the secondary SS. Back up the > primary SS. Check the./SS/RCPD.OUTfile on the primary SS and secondary SS > to confirm that the db_backup was sent from the primary to the secondary and > loaded. > > Good luck. > > Karen Kedda > Enterprise Monitoring Solutions > Berkley Technology Services LLC > > > *[email protected]* > > 03/03/2009 10:02 AM > Please respond to > [email protected] > To > "spectrum" <[email protected]>cc > Subject > [spectrum] Spectrum fault tolerance > > > > > > > > Hi everyone, > > I have two Spectrums 8.1 in my lab environment and I'm trying to setup > fault tolerance between them. I've followed instructions from document > 2770.pdf but was unable to do it. There is a problem after loading the > database (from primary server) to secondary server. SSdbload process says > everything's ok but when I start secondary SS landscape 0x100000 is loaded > with precedence 10 - the same as primary server. After that following > message is displayed - 'WARNING: Two servers on pero port 0xbeef and > sedam-spectrum.int.sedamit.hr port 0xbeef have the same service Landscape > 0x100000 Service Type "Landscape" and precedence 10.' I've made database > save on primary server with 'Save database' in Control Panel when SS was > shutdown. Then I've copy/pasted that file to secondary server and loaded the > database. Everything went well according to messages on the screen. There > are just 69 models loaded to SS when starting it and it should have been > more than 1000. I've made hot standby scenario active. There is normal > connectivity between the servers and pero is not in DNS. > > I'm sending you files that I've edited/changed during setup and also > displays of various commands. Please help me out with this issue. > > > > Regards, > > > ------------------------------------------------------------------------------ > Omar Izetbegović Sedam IT d.o.o. > Borongajska cesta 81a, 10000 Zagreb, Croatia, EU > phone: ++385(0)1 2353 738 mob:++385(0)91 2353 738 > fax: ++385 (0)1 2353 707 web: www.sedamIT.hr > > ------------------------------------------------------------------------------ > > - --To unsubscribe from spectrum, send email to > *[email protected]*<[email protected]>with > the body: unsubscribe spectrum [email protected] [attachment > "2009-03-03 Problem.rar" deleted by Karen Kedda/DE/BTS/WRBerkley] > > > > > ************* > CONFIDENTIALITY NOTICE: This e-mail and the transmitted documents contain > private, privileged and confidential information belonging to the sender. > The information therein is solely for the use of the addressee. If your > receipt of this transmission has occurred as the result of an error, please > immediately notify us so we can arrange for the return of the documents. In > such circumstances, you are advised that you may not disclose, copy, > distribute or take any other action in reliance on the information > transmitted. > > - --To unsubscribe from spectrum, send email to > *[email protected]*<[email protected]>with > the body: unsubscribe spectrum [email protected] > > > > > ************* > CONFIDENTIALITY NOTICE: This e-mail and the transmitted documents contain > private, privileged and confidential information belonging to the sender. > The information therein is solely for the use of the addressee. If your > receipt of this transmission has occurred as the result of an error, please > immediately notify us so we can arrange for the return of the documents. In > such circumstances, you are advised that you may not disclose, copy, > distribute or take any other action in reliance on the information > transmitted. > > - --To unsubscribe from spectrum, send email to [email protected] with > the body: unsubscribe spectrum [email protected] > > -- --- To unsubscribe from spectrum, send email to [email protected] with the body: unsubscribe spectrum [email protected]
