I tried for a while to find something that worked about a year and a half ago.
After trying something that almost had it CAsupport came back with the
following:
<expression>
((((com.aprisma.spectrum.global.CsObjectID)getRowId()).cvt_to_str( 16
)).toString()).substring(12)
</expression>
I was doing something similar but I did not have the cvt_to_str method. It
isn't a perfect format but it worked great for us. It lead me to trying other
methods too.
Sean
Sean Carnes
C&C Network Operations Center
Cablevision Systems Corp.
172*85*77/5163905910
>>> "Naiman, Eugen" <[email protected]> 01/17/10 7:19 PM >>>
Hello,
Recently I've started to work on a OneClick subview to show FDB table
for our switches.
I know there is an "out-of-the-box" subview "Transparent Bridge ..."
which handles the FDB but, for some reason it shows only on a handful of
switches.
Everything went OK until I've seen the result: the MAC address is
displayed in decimal instead of hex.
MIB Tools shows a normal format (hex) for OID's involved in FBD but the
table is messed up.
Here is how it looks:
I've been reading OneClick Customization and tried to figure out an
expression able to convert this from d3ecimal to hex ... no success so
far.
What can I do to have a proper MAC format displayed in there?
Thank you,
Regards
Eugen NAIMAN
CONFIDENTIALITY NOTICE AND DISCLAIMER
The information in this transmission may be confidential and/or protected by
legal professional privilege, and is intended only for the person or persons to
whom it is addressed. If you are not such a person, you are warned that any
disclosure, copying or dissemination of the information is unauthorised. If you
have received the transmission in error, please immediately contact this office
by telephone, fax or email, to inform us of the error and to enable
arrangements to be made for the destruction of the transmission, or its return
at our cost. No liability is accepted for any unauthorised use of the
information contained in this transmission. If the transmission contains
advice, the advice is based on instructions in relation to, and is provided to
the addressee in connection with, the matter mentioned above. Responsibility is
not accepted for reliance upon it by any other person or for any other purpose.
---
To unsubscribe from spectrum, send email to [email protected] with the body:
unsubscribe spectrum [email protected]
--------------------------------------------------------
The information transmitted in this email and any of its attachments is
intended only for the person or entity to which it is addressed and may contain
Cablevision proprietary information, which is privileged, confidential, or
subject to copyright belonging to Cablevision. Any review, retransmission,
dissemination or other use of, or taking of any action in reliance upon, this
information by persons or entities other than the intended recipient is
prohibited and may be unlawful. If you received this in error, please contact
the sender immediately and delete and destroy the communication and all of the
attachments you have received and all copies thereof.
--------------------------------------------------------
---
To unsubscribe from spectrum, send email to [email protected] with the body:
unsubscribe spectrum [email protected]
