HI, You can also try to add the tftp source interface (Spectrum Managed address) command on the router.
Regards, Helen ________________________________ From: Christian Schneider [mailto:[email protected]] Sent: 21 January 2010 11:04 AM To: spectrum Cc: spectrum spectrum Subject: Re: [spectrum] Configuration Manager failure Hi, You will have to change the timeout value if you have slow connectivity or very large config-files.. Regards, Christian Schneider Enterprise Service Specialist 4-tune GmbH Sägereistrasse 29 CH-8152 Glattbrugg http://www.4-tune.ch<http://www.4-tune.ch/> [email protected]<mailto:[email protected]> Office ZH: +41 (0)44 818 02 03 Office SG: +41 (0)71 930 07 00 Mobile: +41 (0)79 418 4542 Fax: +41 (0)71 930 0701 On 20.01.2010, at 23:53, [email protected]<mailto:[email protected]> wrote: Hi Spectrum Group, I had to reinstall my Spectrum environment, so I took advantage of that to installed Spectrum 9.0. After, I had installed Spectrum on Solaris, I procceded to install a TFTP server and probe it. The TFTP server works very fine and when I rediscover some Cisco and Enterasys devices I tried to probe the Spectrum Configuration Manager in order to capture the device confguration, it worked very fine for so little devices and the majority of them failed and display the below error message: ******************************************* The file transfer on the device timeout. The network my be overloaded, or the TFTP server on the SpectroSERVER machine may not be running or responding. ******************************************* I belive that the TFTP server is not the problem because I could capture some Cisco and Enterasys devices configuration, and the SNMP configuration in the device is not the problem too, because of it was working before I reinstalled Spectrum. Anyone that has a suggestion how to fix that issue, will be very appreciated. Atentamente, Víctor Barrionuevo Dirección de Informática - Redes y Soporte Banco Central del Ecuador Av. 10 de Agosto N11-539 y Briceño Teléf: (593) (2) 2572522 Ext. 2416 * --To unsubscribe from spectrum, send email to [email protected]<mailto:[email protected]> with the body: unsubscribe spectrum [email protected]<mailto:[email protected]> * --To unsubscribe from spectrum, send email to [email protected]<mailto:[email protected]> with the body: unsubscribe spectrum [email protected] This message and/or attachment(s) may contain privileged or confidential information. If you are not the intended recipient you may not disclose or distribute any of the information contained within this message. In such case you must destroy this message and inform the sender of the error. T-Systems does not accept liability for any errors, omissions, information and viruses contained in the transmission of this message. Any opinions, conclusions and other information contained within this message not related to T-Systems' official business is deemed to be that of the individual only and is not endorsed by T-Systems. T-Systems - Business Flexibility --- To unsubscribe from spectrum, send email to [email protected] with the body: unsubscribe spectrum [email protected]
