Back in the days when you could buy trapexploder without the cost of buying
the rest of the eHealth suite, I would have seconded that recommendation.
We bought trapexploder way back when we had devices that couldn't send to
as many trap receivers as we wanted. I keep telling my CA team that they
should never sell a copy of Spectrum without a copy of trapexploder, at
least not if the customer is going to install Spectrum fault tolerant. I
forward non-junk traps to all of my Spectrum servers so it doesn't matter
if it's not running on the primary. I also convert some traps into email
as requested. But enough of that ...
Take a look at http://www.net-snmp.org/docs/man/snmptrapd.conf.html and
jump down to "forward OID" -- I have never done this, but I think you can
forward traps with the (free) net-snmp package.
HTH,
- Joni
--On February 14, 2011 4:59:23 AM -0500 Marcel Schulte
<[email protected]> wrote:
Hi list,
we have several snmp devices sending traps to only a limited number of
receivers.
Because of this we'd like to force them to send the traps to a third
IP only which then duplicates the traps to our two FT nodes.
Did anyone of you do something like this? What would be the best way
to get this working?
Many thanks in advance!
Regards,
Marcel
---
To unsubscribe from spectrum, send email to [email protected] with the body:
unsubscribe spectrum [email protected]
