Hello Everyone THe biggest problem I'm having is with the corner pieces. They did not come assembled. There is the visibly hollow corner piece and then a diamond shaped piece that fits into the bottom of the corner. However, I cannot get the piece to sit flush in there. This piece sticking up, even a little bit, will prevent the cube from turning smoothly. Maybe I need to sand something or use a hammer to get it flush. Has anyone else gotten (DIY cubes with DIY corners) like me?
For the plastic, black washers, there is a convex side and a totally flat side. Which side should face the spring? Final Question: What's a good ballpark guideline on how tight to tighten the screws? 2 previous DIYs got loose really quickly, and I couldn't adjust the tension, b/c i had superglued the caps on. I feel like I should have started off making them super tight. Thank You Jason Kovacic [EMAIL PROTECTED] PS Best new Avg w/ Roux today 25.56 no CLL ------------------------ Yahoo! Groups Sponsor --------------------~--> Get fast access to your favorite Yahoo! Groups. Make Yahoo! your home page http://us.click.yahoo.com/dpRU5A/wUILAA/yQLSAA/MXMplB/TM --------------------------------------------------------------------~-> Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/speedsolvingrubikscube/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
