--- Tony Finch <[EMAIL PROTECTED]> wrote:
> I have been trying to use the userland SpeedTouch driver with my FreeBSD
> machine without much success. It works fine on Linux, but unfortunately
> that machine is going to Texas for a week soon, so I have to get FreeBSD
> working...
What version of the speedtouch distribution are you using?
What version of FreeBSD?
Can you post, where relevant,:
/etc/rc.local
/etc/ppp/ppp.conf
/usr/local/etc/rc.d/adsl.sh (or similar if you're starting
your ADSL connection that way).
> The symptoms are as follows: ppp manages to capitalise only one of the
> Ps in the prompt before it goes wrong. The pppoa2.log contains this:
>
> PPPoA2 version 15082001
> Log started on Fri Sep 7 15:13:59 2001
> * pid=13307 * : I'm the parent process, I handle the endpoint 0x07
> < pid=13307 > [Fri Sep 7 15:13:59 2001] pty descriptors : fdin=3, fdout=4
> < pid=13307 > [Fri Sep 7 15:13:59 2001] Increasing SNDBUF from 2048 to 65536
> < pid=13307 > [Fri Sep 7 15:13:59 2001] Increasing RCVBUF from 4096 to 65536
> * pid=13308 * : I'm the children process, I handle the endpoint 0x87
> < pid=13308 > [Fri Sep 7 15:14:02 2001] Error reading from usb
> Reason: Operation timed out
>
> The ppp log contains this (with great verbosity enabled):
>
> /kernel: ugen0: at uhub0 port 1 (addr 2) disconnected
> /kernel: ugen0: detached
> /kernel: ugen0: ALCATEL Speed Touch USB , rev 1.10/0.00, addr 2
> ppp[13301]: Phase: Using interface: tun0
> ppp[13301]: Phase: deflink: Created in closed state
> ppp[13301]: tun0: Command: default: set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0
>0.0.0.0
> ppp[13301]: tun0: Command: default: set timeout 0
> ppp[13301]: tun0: Command: default: add default HISADDR
> ppp[13301]: tun0: ID0: 6 = socket(17, 3, 0)
> ppp[13301]: tun0: ID0: -1 = write(6, data, 140)
> ppp[13301]: tun0: Warning: Add route failed: default already exists
> ppp[13301]: tun0: ID0: 0x28248000 = fopen("/etc/ppp/ppp.conf", "r")
> ppp[13301]: tun0: Command: adsl: set device !pppoa2 -vpi 0 -vci 38 -v 1
> ppp[13301]: tun0: Command: adsl: set authname [EMAIL PROTECTED]
> ppp[13301]: tun0: Command: adsl: set authkey ********
> ppp[13301]: tun0: Command: adsl: set speed sync
> ppp[13301]: tun0: Phase: PPP Started (interactive mode).
> ppp[13301]: tun0: Command: /dev/tty: dial
> ppp[13301]: tun0: Phase: bundle: Establish
> ppp[13301]: tun0: Phase: deflink: closed -> opening
> ppp[13301]: tun0: Phase: deflink: Connected!
> ppp[13301]: tun0: Phase: deflink: opening -> dial
> ppp[13301]: tun0: Chat: deflink: Dial attempt 1 of 1
> ppp[13301]: tun0: Phase: deflink: dial -> carrier
> ppp[13301]: tun0: Phase: deflink: carrier -> login
> ppp[13301]: tun0: Phase: deflink: login -> lcp
> ppp[13301]: tun0: LCP: FSM: Using "deflink" as a transport
> ppp[13301]: tun0: LCP: deflink: State change Initial --> Closed
> ppp[13301]: tun0: LCP: deflink: State change Closed --> Stopped
> ppp[13301]: tun0: LCP: deflink: RecvConfigReq(125) state = Stopped
> ppp[13301]: tun0: LCP: AUTHPROTO[5] 0xc223 (CHAP 0x05)
> ppp[13301]: tun0: LCP: MAGICNUM[6] 0x59a7bccd
> ppp[13301]: tun0: LCP: deflink: SendConfigReq(1) state = Stopped
> ppp[13301]: tun0: LCP: MRU[4] 1500
> ppp[13301]: tun0: LCP: MAGICNUM[6] 0x06c615f9
> ppp[13301]: tun0: LCP: deflink: SendConfigAck(125) state = Stopped
> ppp[13301]: tun0: LCP: AUTHPROTO[5] 0xc223 (CHAP 0x05)
> ppp[13301]: tun0: LCP: MAGICNUM[6] 0x59a7bccd
> ppp[13301]: tun0: LCP: deflink: LayerStart
> ppp[13301]: tun0: LCP: deflink: State change Stopped --> Ack-Sent
> ppp[13301]: tun0: LCP: deflink: RecvConfigReq(126) state = Ack-Sent
> ppp[13301]: tun0: LCP: AUTHPROTO[5] 0xc223 (CHAP 0x05)
> ppp[13301]: tun0: LCP: MAGICNUM[6] 0x59a7bccd
> ppp[13301]: tun0: LCP: deflink: SendConfigAck(126) state = Ack-Sent
> ppp[13301]: tun0: LCP: AUTHPROTO[5] 0xc223 (CHAP 0x05)
> ppp[13301]: tun0: LCP: MAGICNUM[6] 0x59a7bccd
> ppp[13301]: tun0: LCP: deflink: RecvConfigReq(127) state = Ack-Sent
> ppp[13301]: tun0: LCP: AUTHPROTO[5] 0xc223 (CHAP 0x05)
> ppp[13301]: tun0: LCP: MAGICNUM[6] 0x59a7bccd
> ppp[13301]: tun0: LCP: deflink: SendConfigAck(127) state = Ack-Sent
> ppp[13301]: tun0: LCP: AUTHPROTO[5] 0xc223 (CHAP 0x05)
> ppp[13301]: tun0: LCP: MAGICNUM[6] 0x59a7bccd
> ppp[13301]: tun0: LCP: deflink: RecvConfigReq(128) state = Ack-Sent
> ppp[13301]: tun0: LCP: AUTHPROTO[5] 0xc223 (CHAP 0x05)
> ppp[13301]: tun0: LCP: MAGICNUM[6] 0x59a82b19
> ppp[13301]: tun0: LCP: deflink: SendConfigAck(128) state = Ack-Sent
> ppp[13301]: tun0: LCP: AUTHPROTO[5] 0xc223 (CHAP 0x05)
> ppp[13301]: tun0: LCP: MAGICNUM[6] 0x59a82b19
> ppp[13301]: tun0: LCP: deflink: RecvConfigAck(1) state = Ack-Sent
> ppp[13301]: tun0: LCP: deflink: State change Ack-Sent --> Opened
> ppp[13301]: tun0: LCP: deflink: LayerUp
> ppp[13301]: tun0: LQM: deflink: LQR/ECHO LQR not negotiated
> ppp[13301]: tun0: LCP: Sending ident magic 06c615f9 text user-ppp 2.3 (built May 17
>2001)
> ppp[13301]: tun0: LCP: deflink: SendIdent(0) state = Opened
> ppp[13301]: tun0: Phase: bundle: Authenticate
> ppp[13301]: tun0: Phase: deflink: his = CHAP 0x05, mine = none
> ppp[13301]: tun0: Phase: Chap Input: CHALLENGE (16 bytes from RASA2NRP1.Kingston)
> ppp[13301]: tun0: Phase: Chap Output: RESPONSE ([EMAIL PROTECTED])
> ppp[13301]: tun0: Phase: deflink: read (2): Connection reset by peer
> ppp[13301]: tun0: LCP: deflink: LayerDown
> ppp[13301]: tun0: LCP: deflink: State change Opened --> Starting
> ppp[13301]: tun0: LCP: deflink: LayerFinish
> ppp[13301]: tun0: LCP: deflink: State change Starting --> Initial
> ppp[13301]: tun0: Phase: deflink: Disconnected!
> ppp[13301]: tun0: Phase: deflink: lcp -> logout
> ppp[13301]: tun0: Phase: deflink: Disconnected!
> ppp[13301]: tun0: Phase: deflink: logout -> hangup
> ppp[13301]: tun0: Phase: deflink: Connect time: 2 secs: 137 octets in, 198 octets out
> ppp[13301]: tun0: Phase: deflink: : 6 packets in, 7 packets out
> ppp[13301]: tun0: Phase: total 167 bytes/sec, peak 167 bytes/sec on Fri Sep 7
>15:13:41 2001
> ppp[13301]: tun0: Phase: deflink: HUPing 13303
> ppp[13301]: tun0: ID0: -1 = kill(13303, 1)
> ppp[13301]: tun0: Phase: deflink: hangup -> closed
> ppp[13301]: tun0: ID0: 2 = socket(2, 2, 0)
> ppp[13301]: tun0: ID0: 0 = ioctl(2, 3223349521, 0xbfbff7e4)
> ppp[13301]: tun0: ID0: 0 = ioctl(2, 2149607696, 0xbfbff7e4)
> ppp[13301]: tun0: Phase: bundle: Dead
>
> I hope you can help me to fix this problem.
Me too!
Cheers,
Adam.
____________________________________________________________
Do You Yahoo!?
Get your free @yahoo.co.uk address at http://mail.yahoo.co.uk
or your free @yahoo.ie address at http://mail.yahoo.ie
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se d�sinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe
