Hi all,
I am trying to configure my USB speedtouch on NetBSD and have easily managed to get the device working etc etc, but I am unable to dial in to my ISP. The connection works under windows, and my provider is very specific that PAP must be the only authentication protocol used. I don't know a lot about ppp on *BSD, so I have a couple of questions: In Windows, I have to put a phone number in to dial up on my adsl modem. Do I have to enter this number somewhere on my NetBSD box? None of the doco I have found has any provision for it. Do I have to configure a ppp.secret file or a pap-secrets file? Neither of these seems to make a difference (unless I have configured them icorrectly...??). Can anyone give me an idea of what I might have configured incorrectly? Below is my config and log file from when I attempt to connect. Thanks in advance JP default: set log Phase Chat IPCP CCP tun command adsl: set authname [EMAIL PROTECTED] set authkey notmypassword set device !"pppoa2 -vpi 8 -vci 35 -d /dev/ugen0 -v 1" deny chap disable chap enable pap accept pap set speed sync set timeout 0 enable lqr set lqrperiod 5 set redial 15 10000 set dial "" set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0 add default HISADDR enable dns Dec 29 00:11:15 fw01 /netbsd: tun0: not multicast capable, IPv6 not enabled Dec 29 00:11:15 fw01 ppp[220]: Phase: Using interface: tun0 Dec 29 00:11:15 fw01 ppp[220]: Phase: deflink: Created in closed state Dec 29 00:11:15 fw01 ppp[220]: tun0: Command: adsl: set authname [EMAIL PROTECTED] Dec 29 00:11:15 fw01 ppp[220]: tun0: Command: adsl: set authkey ******** Dec 29 00:11:15 fw01 ppp[220]: tun0: Command: adsl: set device !pppoa2 -vpi 8 -vci 35 -d /dev/ugen0 -v 1 Dec 29 00:11:15 fw01 ppp[220]: tun0: Command: adsl: deny chap Dec 29 00:11:15 fw01 ppp[220]: tun0: Command: adsl: disable chap Dec 29 00:11:15 fw01 ppp[220]: tun0: Command: adsl: enable pap Dec 29 00:11:15 fw01 ppp[220]: tun0: Command: adsl: accept pap Dec 29 00:11:15 fw01 ppp[220]: tun0: Command: adsl: set speed sync Dec 29 00:11:15 fw01 ppp[220]: tun0: Command: adsl: set timeout 0 Dec 29 00:11:15 fw01 ppp[220]: tun0: Command: adsl: enable lqr Dec 29 00:11:15 fw01 ppp[220]: tun0: Command: adsl: set lqrperiod 5 Dec 29 00:11:15 fw01 ppp[220]: tun0: Command: adsl: set redial 15 10000 Dec 29 00:11:15 fw01 ppp[220]: tun0: Command: adsl: set dial Dec 29 00:11:15 fw01 ppp[220]: tun0: Command: adsl: set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0 Dec 29 00:11:15 fw01 ppp[220]: tun0: Command: adsl: add default HISADDR Dec 29 00:11:15 fw01 ppp[220]: tun0: Command: adsl: enable dns Dec 29 00:11:15 fw01 ppp[221]: tun0: Phase: PPP Started (background mode). Dec 29 00:11:15 fw01 ppp[221]: tun0: Phase: bundle: Establish Dec 29 00:11:15 fw01 ppp[221]: tun0: Phase: deflink: closed -> opening Dec 29 00:11:15 fw01 pppoa2[223]: Starting PPPoA2 ( merged version includes new ATM/AAL5 stack ) 1_0 Dec 29 00:11:15 fw01 ppp[221]: tun0: Phase: deflink: Connected! Dec 29 00:11:15 fw01 pppoa2[223]: I'm the parent process, I handle the endpoint 0x07 Dec 29 00:11:15 fw01 ppp[221]: tun0: Phase: deflink: opening -> dial Dec 29 00:11:15 fw01 pppoa2[223]: pty descriptors : fdin=3, fdout=4 Dec 29 00:11:15 fw01 ppp[221]: tun0: Chat: deflink: Dial attempt 1 of 10000 Dec 29 00:11:15 fw01 pppoa2[223]: Increasing SNDBUF from 2048 to 65536 Dec 29 00:11:15 fw01 pppoa2[223]: Increasing RCVBUF from 4096 to 65536 Dec 29 00:11:15 fw01 ppp[221]: tun0: Phase: deflink: dial -> carrier Dec 29 00:11:15 fw01 ppp[221]: tun0: Phase: deflink: carrier -> login Dec 29 00:11:15 fw01 ppp[221]: tun0: Phase: deflink: login -> lcp Dec 29 00:11:15 fw01 pppoa2[224]: I'm the children process, I handle the endpoint 0x87 Dec 29 00:11:31 fw01 ppp[221]: tun0: Phase: deflink: Disconnected! Dec 29 00:11:31 fw01 ppp[221]: tun0: Phase: deflink: lcp -> logout Dec 29 00:11:31 fw01 ppp[221]: tun0: Phase: deflink: logout -> hangup Dec 29 00:11:31 fw01 ppp[221]: tun0: Phase: deflink: Disconnected! Dec 29 00:11:31 fw01 ppp[221]: tun0: Phase: deflink: Connect time: 16 secs: 0 octets in, 150 octets out Dec 29 00:11:31 fw01 ppp[221]: tun0: Phase: deflink: : 0 packets in, 5 packets out Dec 29 00:11:31 fw01 ppp[221]: tun0: Phase: total 9 bytes/sec, peak 12 bytes/sec on Sat Dec 29 00:11:19 2001 Dec 29 00:11:31 fw01 ppp[221]: tun0: Phase: deflink: HUPing 223 Dec 29 00:11:31 fw01 pppoa2[223]: Killed by a signal 1 Dec 29 00:11:31 fw01 ppp[221]: tun0: Phase: deflink: hangup -> closed Dec 29 00:11:31 fw01 ppp[221]: tun0: Phase: bundle: Dead Dec 29 00:11:31 fw01 ppp[221]: tun0: Phase: PPP Terminated (normal). Dec 29 00:11:31 fw01 ppp[221]: tun0: Chat: Parent notified of failure Dec 29 00:11:31 fw01 ppp[220]: tun0: Phase: Parent: Child failed (errdead) Liste de diffusion modem ALCATEL SpeedTouch USB Pour se d�sinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe
