do ont use alcatel drivers .... use the one you can find at
http://speedtouch.sourceforge.net
it works very well...
kozaki wrote:
>Hi,
>
>I've done my best to get SpeedTouch running on my Mdk 8.0 (kernel 2.4.3 PPP
>2.4.0) but so far had no connection :o/
> Sure enough i missed something, but as Newbie i cannot even guess where i
>did wrong. Therefore i'm gonna do the whole stuff step by step another time.
>not so tough, and yet quicker than to do the stuff partially xx time
><blink>newbie, newbie, newbie !<blink>
>
>Now following another Howto to do so. Johan Verrept's one, which more
>detailed than others (guess that's because he's among the few who buid the
>module).
>
>Question for u clearer ones :
>Can i do it again (as if i did nothing before) or should i stop right now
>'cause one won't get nothing but trouble when overwriting a configuration
>with slight different Howto ?
>
>Below are the 9 steps as they are in Johan V. Howto.
>Please give info / help at the right place (i didn't understand some answers
>from ng) :
>
>1. Downloading
> J.V. writes about Hotplug-xxxxx-1(.noarch.rpm or .tar.gz)
> Well, there's many of versions ('2001-09-19.tar.gz' for exemple) in
> SourceForge dl page.
> Guess newest's the best, still i'm not sure("2001-19-09 needs kernel 2.4.1
>and modutils 2.4.9") Please give info if it's
> important to know.
>2-to 4. Patching, configuring, building & installing the kernel
> typing : $ uname -a
> Linux localhost.localdomain 2.4.3-20mdk #1 Sun Apr 15 23:03:10 CEST 2001
>i686 unknown
> is that okay to go on ?
>
>5. Building Sppedtouch Kernel Module
> --J.V. Howto : "make sure u untar SARLib & Speedtouch packages in the same
> directory, otherwise SpT module does not build"
> 1st time i c that. 'sarlib 0.2.1' currently is in
> /usr/src/linux-2.4.3/drivers/usb/sarlib/ and i see 'speedtouch.c' in that
> directory (.../drivers/usb/)
> Is that correct so far ?
> --Can edit 'speedtouch.c' (Howto says: remove '#define DEBUG_PACKET 1'')
> there ?
>6. Installing Hotplugging
>7. Installing the Binary Management Application
> - What's better : mgmt.o or Alcaudsl.sys (i dlded mgmt 1.4.3) ?
> - I created a new directory '/permanent' for Alcaudsl.sys. Do i have to do
> smthg like this when untar then install mgmt (actualliy did it in
> [user]/Doc/ADSL/, yes i put it there) ?
>8. Installing PPPoA
> Howto says to install 'ppp-2.4.0b2-2.i386.rpm' daemon. Do i have to get a
> new one when pppd-2.4.0 it's allready running (i dlded ppp-2.4.0-patched) ?
>9. Configuring the system
> I'm not here (yet:o), but how comes J.V. Howto says one has to edit
> /etc/ppp/pap-secrets as the '/chap' one, when my adsl provider's runs on
> chap (Wanadoo) ?
>
>Hey, any help's veeery welcome !
>Ciao,
>kozaki
>
>
>Liste de diffusion modem ALCATEL SpeedTouch USB
>Pour se d�sinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe
>
>
>
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se d�sinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe
