Thanks for all the help - really appreciate it ....

The modem doesn't synch and am not sure what's going on but can still
guess ;-) (hey, even if I'm wrong - it's a learning experience) I
suspect the modem isn't being found did see a message at set-up that
said something about usb being put into loop back but can I find it in
any logs - no.  

Find attached syslog extract 

Will use a different card any suggestions need a pci card for old
fujitsu ergopro-e. Any suggestions ?

Danny
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
On Behalf Of Emil Vaughan
Sent: 05 January 2002 12:01
To: [EMAIL PROTECTED]
Subject: [speedtouch] Re: smoothwall not finding speedtouch


I think modern VIA chipsets are fine. The KT7A is a marvellous board.

Danny, it looks like you have a problem similar to mine. i.e. the
modem_run
program runs ok (modem syncs, green lights etc.) but the pppoax do not.
Post
your /tmp/pppoa2.log and what syslog logs for pppd. Also info about your
distro, system, "lspci", "lsmod", etc.

Are your USB ports on a PCI card? I think Belkin uses the Opti chipset,
but
(gurus on the list please correct me if I am wrong) if your modem syncs
then
the USB subsystem is working and the problem is pppd/pppoax.

Emil


----- Original Message -----
From: <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Saturday, January 05, 2002 11:43 AM
Subject: [speedtouch] Re: smoothwall not finding speedtouch




Hi,

Wich USB chipset have you ?
VIA chispset : find another one
Opti chispset : i had problems with 2 ports USB chipset. No problems
with 4
ports USB chipset

If another one, may be you should test with another chipset.

Philippe


----Message d'origine----
>A: <[EMAIL PROTECTED]>
>Sujet: [speedtouch] smoothwall not finding speedtouch
>Date: Fri, 04 Jan 2002 14:12:03 +0000
>De: <[EMAIL PROTECTED]>
>
>
>
>Hi,
>
>Hope you can help me out.  I have installed smoothwall on pentium 133
with
32mg
>ram.  I have belkin 2 port usb.  Installation seemed to go ok, was able
to
>upload driver mgmt.o as per instructions.  The problem seems to be
ppoa2
can't
>find the modem and really don't know what to do next.  Can anyone help
? Do
you
>need more info (apologies from a relative newbie to posting !!!
>
>Danny
>
>
>
>
>Liste de diffusion modem ALCATEL SpeedTouch USB
>Pour se d�sinscrire :
mailto:[EMAIL PROTECTED]?subject=unsubscribe
>
>
>
>


Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se d�sinscrire :
mailto:[EMAIL PROTECTED]?subject=unsubscribe






Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se d�sinscrire :
mailto:[EMAIL PROTECTED]?subject=unsubscribe

        


Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se d�sinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe

        

Reply via email to