Op woensdag 6 februari 2002 20:26, schreef u:
I had the same problem. Then I used the alcaudsl.sys file (window$ driver)
instead of the mgmt.o file and everyhting worked!
> I am still not able to init my modem. Here are the
> steps I have followed.
>
> 1. Installed the Redhat 7.2 on my compaq presario with
> an OHCI USB chipset using install CDs 1 & 2 from
> redhat.
>
> 2. Booted Machine with Modem connected. Both leds
> turn green as soon as OHCI driver is loaded.
>
>
> Here is a copy of my /proc/bus/usb/devices:
> T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1
> Spd=12 MxCh= 2
> B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
> D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8
> #Cfgs= 1
> P: Vendor=0000 ProdID=0000 Rev= 0.00
> S: Product=USB OHCI Root Hub
> S: SerialNumber=c484a000
> C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
> I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00
> Driver=hub
> E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
> T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 3
> Spd=12 MxCh= 0
> D: Ver= 1.10 Cls=ff(vend.) Sub=00 Prot=00 MxPS= 8
> #Cfgs= 1
> P: Vendor=06b9 ProdID=4061 Rev= 0.00
> S: Manufacturer=ALCATEL
> S: Product=Speed Touch USB
> S: SerialNumber=0090D02DB8E9
> C:* #Ifs= 3 Cfg#= 1 Atr=80 MxPwr=500mA
> I: If#= 0 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00
> Driver=usbdevfs
> E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl= 50ms
> I: If#= 1 Alt= 0 #EPs= 0 Cls=ff(vend.) Sub=00 Prot=00
> Driver=usbdevfs
> I: If#= 1 Alt= 1 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00
> Driver=usbdevfs
> E: Ad=06(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
> E: Ad=07(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
> E: Ad=87(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
> I: If#= 1 Alt= 2 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00
> Driver=usbdevfs
> E: Ad=06(O) Atr=02(Bulk) MxPS= 32 Ivl= 0ms
> E: Ad=07(O) Atr=02(Bulk) MxPS= 32 Ivl= 0ms
> E: Ad=87(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
> I: If#= 1 Alt= 3 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00
> Driver=usbdevfs
> E: Ad=06(O) Atr=02(Bulk) MxPS= 16 Ivl= 0ms
> E: Ad=07(O) Atr=02(Bulk) MxPS= 16 Ivl= 0ms
> E: Ad=87(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
> I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00
> Driver=usbdevfs
> E: Ad=05(O) Atr=02(Bulk) MxPS= 8 Ivl= 0ms
> E: Ad=85(I) Atr=02(Bulk) MxPS= 8 Ivl= 0ms
>
> 3. I extracted the mgmt.o from speedmgt.tar.gz onto my
> /root/downloads/mgmt
>
> Did NOT install or compile
>
> 4. I extracted speedtouch-1_0.tar.gz(Benoit) and
> performed
> ./configure
> make
> make install
>
> All steps passed.
>
> 5. Just to see if I can get modem to sync I did:
>
> /usr/bin/local/modem_run -m -f
> /root/downloads/mgmt/mgmt.o
>
> Modem leds turn off momentarily and then left one
> is solid green while the right one blinks green most
> of the time with a red blink once in a while.
>
> I did this just to see if I get sync and didnt want to
> worry about all the PPP stuff. In the past I have done
> the fully HOWTO that Benoit suggest. Also could NOT
> get sync.
>
> My modem works with another computer running under
> windows. The rj11 jack and cord work as well.
>
> Here is a copy of my log:
> Feb 6 13:11:01 localhost syslogd 1.4.1: restart.
> Feb 6 13:11:01 localhost syslog: syslogd startup
> succeeded
> Feb 6 13:11:01 localhost syslog: klogd startup
> succeeded
> Feb 6 13:11:01 localhost kernel: klogd 1.4.1, log
> source = /proc/kmsg started.
> Feb 6 13:11:01 localhost kernel: Inspecting
> /boot/System.map-2.4.7-10
> Feb 6 13:11:02 localhost portmap: portmap startup
> succeeded
> Feb 6 13:11:02 localhost rpc.statd[715]: Version
> 0.3.1 Starting
> Feb 6 13:11:03 localhost nfslock: rpc.statd startup
> succeeded
> Feb 6 13:11:03 localhost kernel: Loaded 15046 symbols
> from /boot/System.map-2.4.7-10.
> Feb 6 13:11:03 localhost kernel: Symbols match kernel
> version 2.4.7.
> Feb 6 13:11:03 localhost kernel: Loaded 115 symbols
> from 6 modules.
> Feb 6 13:11:03 localhost kernel: Linux version
> 2.4.7-10 ([EMAIL PROTECTED]) (gcc
> version 2.96 20000731 (Red Hat Linux 7.1 2.96-98)) #1
> Thu Sep 6 17:27:27 EDT 2001
> Feb 6 13:11:03 localhost kernel: BIOS-provided
> physical RAM map:
> Feb 6 13:11:03 localhost kernel: BIOS-e820:
> 0000000000000000 - 000000000009fc00 (usable)
> Feb 6 13:11:03 localhost kernel: BIOS-e820:
> 000000000009fc00 - 00000000000a0000 (reserved)
> Feb 6 13:11:03 localhost kernel: BIOS-e820:
> 00000000000f0000 - 0000000000100000 (reserved)
> Feb 6 13:11:03 localhost kernel: BIOS-e820:
> 0000000000100000 - 0000000003bf0000 (usable)
> Feb 6 13:11:03 localhost kernel: BIOS-e820:
> 0000000003bf0000 - 0000000003bf3000 (ACPI NVS)
> Feb 6 13:11:03 localhost kernel: BIOS-e820:
> 0000000003bf3000 - 0000000003c00000 (ACPI data)
> Feb 6 13:11:03 localhost kernel: BIOS-e820:
> 00000000ffff0000 - 0000000100000000 (reserved)
> Feb 6 13:11:03 localhost kernel: Scanning bios EBDA
> for MXT signature
> Feb 6 13:11:03 localhost kernel: On node 0
> totalpages: 15344
> Feb 6 13:11:03 localhost kernel: zone(0): 4096 pages.
> Feb 6 13:11:03 localhost kernel: zone(1): 11248
> pages.
> Feb 6 13:11:03 localhost kernel: zone(2): 0 pages.
> Feb 6 13:11:03 localhost kernel: Kernel command line:
> auto BOOT_IMAGE=linux ro root=302
> BOOT_FILE=/boot/vmlinuz-2.4.7-10
> Feb 6 13:11:03 localhost kernel: Initializing CPU#0
> Feb 6 13:11:03 localhost keytable: Loading keymap:
> succeeded
> Feb 6 13:11:03 localhost kernel: Detected 250.069 MHz
> processor.
> Feb 6 13:09:42 localhost rc.sysinit: Mounting proc
> filesystem: succeeded
> Feb 6 13:11:03 localhost kernel: Console: colour VGA+
> 80x25
> Feb 6 13:09:42 localhost rc.sysinit: Unmounting
> initrd: succeeded
> Feb 6 13:11:04 localhost keytable: Loading system
> font: succeeded
> Feb 6 13:11:04 localhost kernel: Calibrating delay
> loop... 498.07 BogoMIPS
> Feb 6 13:09:42 localhost sysctl: net.ipv4.ip_forward
> = 0
> Feb 6 13:11:04 localhost kernel: Memory:
> 57216k/61376k available (1269k kernel code, 3420k
> reserved, 90k data, 220k init, 0k highmem)
> Feb 6 13:09:42 localhost sysctl:
> net.ipv4.conf.default.rp_filter = 1
> Feb 6 13:11:04 localhost kernel: Checking if this
> processor honours the WP bit even in supervisor
> mode... Ok.
> Feb 6 13:09:42 localhost sysctl: kernel.sysrq = 0
> Feb 6 13:11:04 localhost kernel: Dentry-cache hash
> table entries: 8192 (order: 4, 65536 bytes)
> Feb 6 13:11:04 localhost random: Initializing random
> number generator: succeeded
> Feb 6 13:09:42 localhost rc.sysinit: Configuring
> kernel parameters: succeeded
> Feb 6 13:11:04 localhost kernel: Inode-cache hash
> table entries: 4096 (order: 3, 32768 bytes)
> Feb 6 13:09:42 localhost date: Wed Feb 6 13:09:35
> EST 2002
> Feb 6 13:11:04 localhost kernel: Mount-cache hash
> table entries: 1024 (order: 1, 8192 bytes)
> Feb 6 13:09:42 localhost rc.sysinit: Setting clock
> (localtime): Wed Feb 6 13:09:35 EST 2002 succeeded
> Feb 6 13:11:05 localhost kernel: Buffer-cache hash
> table entries: 1024 (order: 0, 4096 bytes)
> Feb 6 13:09:42 localhost rc.sysinit: Loading default
> keymap succeeded
> Feb 6 13:11:05 localhost kernel: Page-cache hash
> table entries: 16384 (order: 5, 131072 bytes)
> Feb 6 13:09:42 localhost rc.sysinit: Setting default
> font (lat0-sun16): succeeded
> Feb 6 13:11:06 localhost netfs: Mounting other
> filesystems: succeeded
> Feb 6 13:09:42 localhost rc.sysinit: Activating swap
> partitions: succeeded
> Feb 6 13:09:42 localhost rc.sysinit: Setting hostname
> localhost.localdomain: succeeded
> Feb 6 13:09:42 localhost rc.sysinit: Mounting USB
> filesystem: succeeded
> Feb 6 13:11:06 localhost apmd[827]: Version 3.0final
> (APM BIOS 1.2, Linux driver 1.14)
> Feb 6 13:11:06 localhost apmd: apmd startup succeeded
> Feb 6 13:09:42 localhost rc.sysinit: Initializing USB
> controller (usb-ohci): succeeded
> Feb 6 13:11:07 localhost kernel: CPU: Cyrix M II 2.5x
> Core/Bus Clock stepping 04
> Feb 6 13:11:07 localhost apmd[827]: Charge: * * *
> (-1% unknown)
> Feb 6 13:09:42 localhost fsck: /: clean, 80348/496992
> files, 318717/992013 blocks
> Feb 6 13:09:42 localhost rc.sysinit: Checking root
> filesystem succeeded
> Feb 6 13:09:42 localhost rc.sysinit: Remounting root
> filesystem in read-write mode: succeeded
> Feb 6 13:11:07 localhost kernel: Checking 'hlt'
> instruction... OK.
> Feb 6 13:11:08 localhost kernel: POSIX conformance
> testing by UNIFIX
> Feb 6 13:11:08 localhost kernel: mtrr: v1.40
> (20010327) Richard Gooch ([EMAIL PROTECTED])
> Feb 6 13:09:43 localhost rc.sysinit: Finding module
> dependencies: succeeded
> Feb 6 13:09:44 localhost fsck: /boot: clean, 31/12048
> files, 7320/48163 blocks
> Feb 6 13:09:44 localhost rc.sysinit: Checking
> filesystems succeeded
> Feb 6 13:11:08 localhost autofs: automount startup
> succeeded
> Feb 6 13:09:44 localhost rc.sysinit: Mounting local
> filesystems: succeeded
> Feb 6 13:11:08 localhost kernel: mtrr: detected mtrr
> type: Cyrix ARR
> Feb 6 13:09:44 localhost rc.sysinit: Enabling local
> filesystem quotas: succeeded
> Feb 6 13:11:08 localhost kernel: PCI: PCI BIOS
> revision 2.10 entry at 0xfb4c0, last bus=1
> Feb 6 13:09:45 localhost rc.sysinit: Enabling swap
> space: succeeded
> Feb 6 13:11:08 localhost kernel: PCI: Using
> configuration type 1
> Feb 6 13:09:48 localhost init: Entering runlevel: 5
> Feb 6 13:11:09 localhost kernel: PCI: Probing PCI
> hardware
> Feb 6 13:09:49 localhost kudzu: Updating /etc/fstab
> succeeded
> Feb 6 13:11:09 localhost kernel: PCI: Using IRQ
> router SIS [1039/0008] at 00:01.0
> Feb 6 13:09:57 localhost kudzu: succeeded
> Feb 6 13:11:09 localhost kernel: isapnp: Scanning for
> PnP cards...
> Feb 6 13:09:57 localhost ipchains: Flushing all
> current rules and user defined chains: succeeded
> Feb 6 13:11:09 localhost kernel: isapnp: No Plug &
> Play device found
> Feb 6 13:09:57 localhost ipchains: Clearing all
> current rules and user defined chains: succeeded
> Feb 6 13:11:09 localhost kernel: Linux NET4.0 for
> Linux 2.4
> Feb 6 13:09:58 localhost ipchains: Applying ipchains
> firewall rules succeeded
> Feb 6 13:11:10 localhost kernel: Based upon Swansea
> University Computer Society NET3.039
> Feb 6 13:09:59 localhost sysctl: net.ipv4.ip_forward
> = 0
> Feb 6 13:11:10 localhost kernel: Initializing RT
> netlink socket
> Feb 6 13:09:59 localhost sysctl:
> net.ipv4.conf.default.rp_filter = 1
> Feb 6 13:09:59 localhost sysctl: kernel.sysrq = 0
> Feb 6 13:09:59 localhost network: Setting network
> parameters: succeeded
> Feb 6 13:10:00 localhost network: Bringing up
> interface lo: succeeded
> Feb 6 13:11:10 localhost kernel: apm: BIOS version
> 1.2 Flags 0x07 (Driver version 1.14)
> Feb 6 13:11:11 localhost kernel: mxt_scan_bios: enter
> Feb 6 13:10:01 localhost ifup: Determining IP
> information for eth0...
> Feb 6 13:11:11 localhost kernel: Starting kswapd v1.8
> Feb 6 13:11:11 localhost kernel: VFS: Diskquotas
> version dquot_6.5.0 initialized
> Feb 6 13:11:01 localhost dhcpcd[633]: timed out
> waiting for a valid DHCP server response
> Feb 6 13:11:11 localhost kernel: pty: 2048 Unix98
> ptys configured
> Feb 6 13:11:11 localhost kernel: Serial driver
> version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT
> SHARE_IRQ SERIAL_PCI ISAPNP enabled
> Feb 6 13:11:01 localhost ifup: failed.
> Feb 6 13:11:11 localhost kernel: ttyS00 at 0x03f8
> (irq = 4) is a 16550A
> Feb 6 13:11:11 localhost kernel: Real Time Clock
> Driver v1.10d
> Feb 6 13:11:01 localhost network: Bringing up
> interface eth0: failed
> Feb 6 13:11:11 localhost kernel: block: queued
> sectors max/low 37941kB/12647kB, 128 slots per queue
> Feb 6 13:11:11 localhost kernel: RAMDISK driver
> initialized: 16 RAM disks of 4096K size 1024 blocksize
> Feb 6 13:11:12 localhost kernel: Uniform
> Multi-Platform E-IDE driver Revision: 6.31
> Feb 6 13:11:12 localhost kernel: ide: Assuming 33MHz
> PCI bus speed for PIO modes; override with idebus=xx
> Feb 6 13:11:12 localhost kernel: SIS5513: IDE
> controller on PCI bus 00 dev 01
> Feb 6 13:11:12 localhost kernel: SIS5513: chipset
> revision 208
> Feb 6 13:11:12 localhost kernel: SIS5513: not 100%%
> native mode: will probe irqs later
> Feb 6 13:11:12 localhost kernel: SiS530
> Feb 6 13:11:12 localhost kernel: ide0: BM-DMA at
> 0x4000-0x4007, BIOS settings: hda:DMA, hdb:DMA
> Feb 6 13:11:12 localhost kernel: ide1: BM-DMA at
> 0x4008-0x400f, BIOS settings: hdc:DMA, hdd:DMA
> Feb 6 13:11:12 localhost kernel: hda: ST34311A, ATA
> DISK drive
> Feb 6 13:11:12 localhost kernel: hdb: LTN323, ATAPI
> CD/DVD-ROM drive
> Feb 6 13:11:12 localhost kernel: ide0 at
> 0x1f0-0x1f7,0x3f6 on irq 14
> Feb 6 13:11:12 localhost kernel: hda: 8421840 sectors
> (4312 MB) w/256KiB Cache, CHS=524/255/63, UDMA(66)
> Feb 6 13:11:12 localhost kernel: ide-floppy driver
> 0.97
> Feb 6 13:11:12 localhost kernel: Partition check:
> Feb 6 13:11:12 localhost xinetd: xinetd startup
> succeeded
> Feb 6 13:11:12 localhost kernel: hda: hda1 hda2 hda3
> Feb 6 13:11:12 localhost kernel: Floppy drive(s): fd0
> is 1.44M
> Feb 6 13:11:12 localhost kernel: FDC 0 is a post-1991
> 82077
> Feb 6 13:11:12 localhost xinetd[896]: chargen
> disabled, removing
> Feb 6 13:11:13 localhost kernel: ide-floppy driver
> 0.97
> Feb 6 13:11:13 localhost xinetd[896]: chargen
> disabled, removing
> Feb 6 13:11:13 localhost kernel: md: md driver 0.90.0
> MAX_MD_DEVS=256, MD_SB_DISKS=27
> Feb 6 13:11:13 localhost kernel: md: Autodetecting
> RAID arrays.
> Feb 6 13:11:13 localhost kernel: md: autorun ...
> Feb 6 13:11:13 localhost kernel: md: ... autorun
> DONE.
> Feb 6 13:11:13 localhost xinetd[896]: daytime
> disabled, removing
> Feb 6 13:11:13 localhost kernel: NET4: Linux TCP/IP
> 1.0 for NET4.0
> Feb 6 13:11:13 localhost xinetd[896]: daytime
> disabled, removing
> Feb 6 13:11:13 localhost kernel: IP Protocols: ICMP,
> UDP, TCP, IGMP
> Feb 6 13:11:13 localhost xinetd[896]: echo disabled,
> removing
> Feb 6 13:11:13 localhost kernel: IP: routing cache
> hash table of 512 buckets, 4Kbytes
> Feb 6 13:11:13 localhost xinetd[896]: echo disabled,
> removing
> Feb 6 13:11:13 localhost kernel: TCP: Hash tables
> configured (established 4096 bind 4096)
> Feb 6 13:11:13 localhost xinetd[896]: rsync disabled,
> removing
> Feb 6 13:11:13 localhost kernel: Linux IP multicast
> router 0.06 plus PIM-SM
> Feb 6 13:11:13 localhost xinetd[896]: time disabled,
> removing
> Feb 6 13:11:13 localhost kernel: NET4: Unix domain
> sockets 1.0/SMP for Linux NET4.0.
> Feb 6 13:11:13 localhost xinetd[896]: time disabled,
> removing
> Feb 6 13:11:13 localhost kernel: RAMDISK: Compressed
> image found at block 0
> Feb 6 13:11:14 localhost kernel: Freeing initrd
> memory: 322k freed
> Feb 6 13:11:14 localhost kernel: VFS: Mounted root
> (ext2 filesystem).
> Feb 6 13:11:14 localhost kernel: Journalled Block
> Device driver loaded
> Feb 6 13:11:14 localhost kernel: hda: dma_intr:
> status=0x51 { DriveReady SeekComplete Error }
> Feb 6 13:11:14 localhost kernel: hda: dma_intr:
> error=0x84 { DriveStatusError BadCRC }
> Feb 6 13:11:14 localhost kernel: hda: dma_intr:
> status=0x51 { DriveReady SeekComplete Error }
> Feb 6 13:11:14 localhost kernel: hda: dma_intr:
> error=0x84 { DriveStatusError BadCRC }
> Feb 6 13:11:14 localhost kernel: hda: dma_intr:
> status=0x51 { DriveReady SeekComplete Error }
> Feb 6 13:11:14 localhost kernel: hda: dma_intr:
> error=0x84 { DriveStatusError BadCRC }
> Feb 6 13:11:14 localhost kernel: hda: dma_intr:
> status=0x51 { DriveReady SeekComplete Error }
> Feb 6 13:11:14 localhost kernel: hda: dma_intr:
> error=0x84 { DriveStatusError BadCRC }
> Feb 6 13:11:14 localhost kernel: ide0: reset: success
> Feb 6 13:11:14 localhost kernel: kjournald starting.
> Commit interval 5 seconds
> Feb 6 13:11:14 localhost kernel: EXT3-fs: mounted
> filesystem with ordered data mode.
> Feb 6 13:11:14 localhost kernel: Freeing unused
> kernel memory: 220k freed
> Feb 6 13:11:14 localhost kernel: Adding Swap: 192772k
> swap-space (priority -1)
> Feb 6 13:11:14 localhost kernel: usb.c: registered
> new driver usbdevfs
> Feb 6 13:11:14 localhost kernel: usb.c: registered
> new driver hub
> Feb 6 13:11:14 localhost kernel: usb-ohci.c: USB OHCI
> at membase 0xc484a000, IRQ 3
> Feb 6 13:11:14 localhost kernel: usb-ohci.c:
> usb-00:01.2, Silicon Integrated Systems [SiS] 7001
> Feb 6 13:11:14 localhost kernel: usb.c: new USB bus
> registered, assigned bus number 1
> Feb 6 13:11:14 localhost kernel: hub.c: USB hub found
> Feb 6 13:11:14 localhost kernel: hub.c: 2 ports
> detected
> Feb 6 13:11:14 localhost xinetd[896]: xinetd Version
> 2.3.3 started with libwrap options compiled in.
> Feb 6 13:11:15 localhost kernel: usb-ohci.c: v5.2:USB
> OHCI Host Controller Driver
> Feb 6 13:11:15 localhost xinetd[896]: Started
> working: 1 available service
> Feb 6 13:11:15 localhost kernel: hub.c: USB new
> device connect on bus1/2, assigned device number 2
> Feb 6 13:11:15 localhost kernel: usb.c: USB device 2
> (vend/prod 0x6b9/0x4061) is not claimed by any active
> driver.
> Feb 6 13:11:15 localhost kernel: EXT3 FS 2.4-0.9.8,
> 25 Aug 2001 on ide0(3,2), internal journal
> Feb 6 13:11:15 localhost kernel: kjournald starting.
> Commit interval 5 seconds
> Feb 6 13:11:15 localhost kernel: EXT3 FS 2.4-0.9.8,
> 25 Aug 2001 on ide0(3,1), internal journal
> Feb 6 13:11:15 localhost kernel: EXT3-fs: mounted
> filesystem with ordered data mode.
> Feb 6 13:11:15 localhost kernel: 0x378: FIFO is 16
> bytes
> Feb 6 13:11:15 localhost kernel: 0x378:
> writeIntrThreshold is 16
> Feb 6 13:11:15 localhost kernel: 0x378:
> readIntrThreshold is 16
> Feb 6 13:11:15 localhost kernel: parport0: PC-style
> at 0x378 (0x778) [PCSPP,TRISTATE,COMPAT,ECP]
> Feb 6 13:11:16 localhost kernel: parport0: irq 7
> detected
> Feb 6 13:11:16 localhost kernel: ip_conntrack (479
> buckets, 3832 max)
> Feb 6 13:11:16 localhost kernel: 8139too Fast
> Ethernet driver 0.9.18a
> Feb 6 13:11:16 localhost kernel: PCI: Found IRQ 11
> for device 00:0b.0
> Feb 6 13:11:16 localhost kernel: eth0: RealTek
> RTL8139 Fast Ethernet at 0xc4872000,
> 00:4f:4e:03:84:1d, IRQ 11
> Feb 6 13:11:16 localhost kernel: eth0: Setting
> half-duplex based on auto-negotiated partner ability
> 0000.
> Feb 6 13:11:19 localhost sendmail: sendmail startup
> succeeded
> Feb 6 13:11:20 localhost gpm: gpm startup succeeded
> Feb 6 13:11:21 localhost crond: crond startup
> succeeded
> Feb 6 13:11:23 localhost xfs: listening on port 7100
> Feb 6 13:11:23 localhost xfs: xfs startup succeeded
> Feb 6 13:11:23 localhost anacron: anacron startup
> succeeded
> Feb 6 13:11:24 localhost atd: atd startup succeeded
> Feb 6 13:11:24 localhost xfs: ignoring font path
> element /usr/X11R6/lib/X11/fonts/cyrillic (unreadable)
>
> Feb 6 13:11:24 localhost xfs: ignoring font path
> element /usr/X11R6/lib/X11/fonts/local (unreadable)
> Feb 6 13:11:24 localhost rc: Starting wine:
> succeeded
> Feb 6 13:14:02 localhost kernel: usb.c: USB
> disconnect on device 2
> Feb 6 13:16:28 localhost syslogd 1.4.1: restart.
> Feb 6 13:17:35 localhost gdm(pam_unix)[1104]: session
> opened for user root by (uid=0)
> Feb 6 13:17:48 localhost kernel: solo1: version v0.19
> time 17:36:51 Sep 6 2001
> Feb 6 13:17:48 localhost kernel: PCI: Found IRQ 5 for
> device 00:0f.0
> Feb 6 13:17:48 localhost kernel: solo1: joystick port
> at 0xe401
> Feb 6 13:17:48 localhost modprobe: modprobe: Can't
> locate module sound-service-0-0
> Feb 6 13:17:50 localhost kernel: hub.c: USB new
> device connect on bus1/2, assigned device number 3
> Feb 6 13:17:50 localhost kernel: usb.c: USB device 3
> (vend/prod 0x6b9/0x4061) is not claimed by any active
> driver.
> Feb 6 13:17:50 localhost /etc/hotplug/usb.agent: ...
> no drivers for USB product 6b9/4061/0
> Feb 6 13:17:56 localhost gnome-name-server[4000]:
> starting
> Feb 6 13:17:56 localhost gnome-name-server[4002]:
> starting
> Feb 6 13:17:56 localhost gnome-name-server[4000]:
> name server starting
> Feb 6 13:17:56 localhost kernel: ide-floppy driver
> 0.97
> Feb 6 13:17:56 localhost gnome-name-server[4002]:
> name server was running on display, exiting
> Feb 6 13:17:57 localhost kernel: hdb: ATAPI 32X
> CD-ROM drive, 120kB Cache, DMA
> Feb 6 13:17:57 localhost kernel: Uniform CD-ROM
> driver Revision: 3.12
> Feb 6 13:18:03 localhost gconfd (root-4094): starting
> (version 1.0.4), pid 4094 user 'root'
> Feb 6 13:18:03 localhost gconfd (root-4094):
> Successfully registered `OAFIID:gconfd:19991118'
> Feb 6 13:18:03 localhost gconfd (root-4094): Unable
> to open saved state file '/root/.gconfd/saved_state':
> No such file or directory
> Feb 6 13:18:08 localhost kernel: cdrom: This disc
> doesn't have any tracks I recognize!
> Feb 6 13:18:09 localhost xinetd[4181]: warning: can't
> get client address: Transport endpoint is not
> connected
> Feb 6 13:18:33 localhost kernel: cdrom: This disc
> doesn't have any tracks I recognize!
> Feb 6 13:18:34 localhost xinetd[4595]: warning: can't
> get client address: Transport endpoint is not
> connected
> Feb 6 13:23:03 localhost gconfd (root-4094): 20 items
> remain in the cache after cleaning already-synced
> items older than 300 seconds
> Feb 6 13:55:37 localhost kernel:
> usb_control/bulk_msg: timeout
> Feb 6 13:55:37 localhost kernel: usbdevfs:
> USBDEVFS_BULK failed dev 3 ep 0x85 len 512 ret -110
> Feb 6 13:55:39 localhost kernel:
> usb_control/bulk_msg: timeout
> Feb 6 13:56:10 localhost last message repeated 3
> times
> Feb 6 13:58:54 localhost last message repeated 6
> times
> Feb 6 13:59:56 localhost last message repeated 6
> times
> Feb 6 14:02:09 localhost last message repeated 4
> times
> Feb 6 14:03:10 localhost last message repeated 6
> times
> Feb 6 14:05:44 localhost last message repeated 6
> times
> Feb 6 14:06:46 localhost last message repeated 5
> times
> Feb 6 14:09:40 localhost last message repeated 6
> times
> Feb 6 14:10:41 localhost last message repeated 6
> times
> Feb 6 14:11:43 localhost last message repeated 6
> times
> Feb 6 14:14:07 localhost last message repeated 4
> times
> Feb 6 14:15:08 localhost last message repeated 4
> times
> Feb 6 14:16:10 localhost last message repeated 6
> times
> Feb 6 14:17:11 localhost last message repeated 6
> times
> Feb 6 14:19:35 localhost last message repeated 3
> times
> Feb 6 14:20:36 localhost last message repeated 4
> times
> Feb 6 14:21:37 localhost last message repeated 6
> times
>
>
> Again, all I have done is simply start with a brand
> new installation of Redhat 7.2 and copy and install
> the drivers above. I have not patched anything,
> complied any kernel, or nothing.
>
> I have tried lots of things, but I think I am just
> trying to accomplish SYNC here.
>
> Am I missing a step?
> Should the ppp modules be loaded?
>
> Your help is greatly appreciated.
>
> Thank you,
> Ozzy
>
>
> __________________________________________________
> Do You Yahoo!?
> Send FREE Valentine eCards with Yahoo! Greetings!
> http://greetings.yahoo.com
>
>
> Liste de diffusion modem ALCATEL SpeedTouch USB
> Pour se d�sinscrire :
> mailto:[EMAIL PROTECTED]?subject=unsubscribe
Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se d�sinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe
