>> "OR" == Olivier Rioland <[EMAIL PROTECTED]> writes:
Olivier, I can't answer most of these questions, but: OR> - I read somewhere OR> (http://www.via.ecp.fr/~jm/divers/speedtouch.html) that ATM OR> module (which is Experimental ...) should be added into kernel OR> for use pppoa ... is it true ? This is incorrect. If you are using pppoa[23], that does all the ATM stuff internally - it takes data from the modem as a USB device, reassembles ATM packets from that data, rearranges these into PPP packets, and spits them out onto a pseudo-tty device for pppd. Thus the ATM is *entirely* contained within pppoa[23]. OR> - modem_run prepare the modem for use, but how can I re-prepare it OR> (for exemple to try option '-e 1') without reboot my system ? Just unplug it for a few seconds or rmmod the USB stack (all the way to the bottom I think), so it loses all its state. You can't upload the management code more than once, so it has to be deactivated between attempts. I am not sure if there is some way to tell the USB subsystem to 'unplug' a particular device and plug it back in - if there is, I think it would be a good idea to make modem_run have an option to do this before trying to upload. HTH. Peter -- Peter Riocreux, Amulet Group, Dept. Computer Science, Manchester University, Oxford Road, MANCHESTER, M13 9PL, UK. <http://www.cs.man.ac.uk/amulet/> Voice: +44 161-2753547 Mobile: +44 7970-611366 Fax: +44 161-2756236 Liste de diffusion modem ALCATEL SpeedTouch USB Pour se d�sinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe
