If use the CVS_19_11_2002 with the patch for the 330 under Mandrake 9.0 on a
Gigabyte GA-7VRXP motherboard. The microcode used is alcaudsl.sys in stead
of mgmt.o, which I believe should make no difference.
The installation procedure is the one described by Papillault.
It all works but the connection sometimes tends to halt for a considerable
time. Don't know why. A reboot is no solution.
The problem also seems to be present under Windows98.

> -----Oorspronkelijk bericht-----
> Van: Alain Danet [mailto:[EMAIL PROTECTED]]
> Verzonden: zaterdag 4 januari 2003 22:47
> Aan: [EMAIL PROTECTED]
> Onderwerp: [speedtouch] Speedtouch 330 under Linux. Is it possible?
> 
> 
> 
> Hi,
> Is there anybody on this list who can confirm that he uses a 
> SpeedTouch
> 330 modem under Linux to access Internet through ADSL (please note I'm
> speaking of the Alcatel Speedtouch 330 or Thomson Speedtouch 330 which
> is another name for the same modem and NOT of the Alcatel 
> Speedtouch USB
> modem. See attached images of these two modems)? It could be very
> usefull for a lot of people who fail in installing propely 
> the access to
> know the following :
> - which type of Linux distribution and version is used.
> - which driver ? : Alcatel's driver for Linux doesn't exist 
> for this USB
> ADSL Speedtouch 330 modem. If the driver used has been downloaded from
> the official site (sourceforge.net) what was the version used?
> - which installation procedure?
> 
> Personally, I tried several time with Mandrake 9.0 distribution using
> either the Speedtouch.rpm package of the distribution or compiling the
> CVS_19_11_2002 version downloaded from
> http://sourceforge.net/projects/speedtouch without success.
> For this last version I also tried with the patch provided at
> http://noothuy.free.fr/Speedtouchst330/index.html.
> 
> Here is an extract of my Logs proving that ADSL becomes Up 
> but that the
> problem is in the LCP phase :
> Dec 31 17:06:21 localhost modem_run[2052]: ADSL 
> synchronization has been
> obtained
> Dec 31 17:06:21 localhost modem_run[2052]: Modem State
> Dec 31 17:06:21 localhost modem_run[2052]: ADSL line is up (608 kbit/s
> down | 160 kbit/s up)
> Dec 31 17:06:21 localhost pppd[2055]: pppd 2.4.1 started by 
> root, uid 0
> Dec 31 17:06:21 localhost /etc/hotplug/net.agent: assuming ppp0 is
> already up
> Dec 31 17:06:21 localhost pppd[2055]: Using interface ppp0
> Dec 31 17:06:21 localhost pppd[2055]: Connect: ppp0 <--> /dev/pts/2
> Dec 31 17:06:21 localhost pppoa3[2056]: pppoa3 version CVS_19_11_2002
> started by root (uid 0)
> Dec 31 17:06:21 localhost pppoa3[2056]: Vpi set to 8
> Dec 31 17:06:21 localhost pppoa3[2056]: Vci set to 35
> Dec 31 17:06:21 localhost pppoa3[2056]: Verbosity level set to 2
> Dec 31 17:06:21 localhost pppoa3[2056]: Schedule policy set to 0
> Dec 31 17:06:21 localhost pppoa3[2056]: Modem ID set to 1
> Dec 31 17:06:21 localhost pppoa3[2056]: Using Sync HDLC mode
> Dec 31 17:06:21 localhost pppoa3[2056]: Using PPPoA mode
> Dec 31 17:06:21 localhost pppoa3[2056]: Control pipe disabled
> Dec 31 17:06:21 localhost pppoa3[2056]: Previous instance cleaning
> enabled
> Dec 31 17:06:21 localhost pppoa3[2056]: Control thread ready
> Dec 31 17:06:21 localhost pppoa3[2056]: Pty descriptors : fdin=0,
> fdout=1
> Dec 31 17:06:21 localhost pppoa3[2056]: N_HDLC line set up
> Dec 31 17:06:21 localhost pppoa3[2056]: Modem found!
> Dec 31 17:06:21 localhost pppoa3[2066]: host  --> pppoa3 --> modem
> stream ready
> Dec 31 17:06:21 localhost pppoa3[2067]: modem --> pppoa3 --> host
> stream ready
> Dec 31 17:06:22 localhost pppoa3[2066]: ATM cell queue sent to USB
> Dec 31 17:06:49 localhost last message repeated 9 times
> Dec 31 17:06:52 localhost pppd[2055]: LCP: timeout sending
> Config-Requests
> Dec 31 17:06:52 localhost pppd[2055]: Connection terminated.
> Dec 31 17:06:52 localhost pppoa3[2066]: Error reading from 
> source device
> Dec 31 17:06:52 localhost pppoa3[2066]: Cleaning Read from usb data
> Dec 31 17:06:52 localhost pppoa3[2056]: Woken by a sem_post event ->
> Exiting
> Dec 31 17:06:52 localhost pppoa3[2056]: Write to usb Canceled
> Dec 31 17:06:52 localhost pppoa3[2067]: Cleaning Write to usb data
> Dec 31 17:06:52 localhost pppoa3[2056]: Exiting
> 
> Cheers
> 
> Alain Danet
>  
> 
> 
> -- Binary/unsupported file stripped by Listar --
> -- Type: image/jpeg
> -- File: Speedtouch_USB .jpg
> 
> 
> -- Binary/unsupported file stripped by Listar --
> -- Type: image/jpeg
> -- File: Speedtouch_330_USB.jpg
> 
> 
> Liste de diffusion modem ALCATEL SpeedTouch USB
> Pour se d�sinscrire : 
> mailto:[EMAIL PROTECTED]?subject=unsubscribe
> 
>       
> 

Disclaimer
************************************************************************
Aan dit bericht kunnen geen rechten worden ontleend. 
Dit bericht is uitsluitend bestemd voor de geadresseerde.
Als u dit bericht per abuis hebt ontvangen, wordt u verzocht het te 
vernietigen en de afzender te informeren.
Wij adviseren u om bij twijfel over de juistheid of de volledigheid van 
de mail contact met afzender op te nemen.
************************************************************************



Liste de diffusion modem ALCATEL SpeedTouch USB
Pour se d�sinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe

        

Reply via email to