> o I needed to load "uhci_hcd" which is the new name for the previous > "new" uhci driver, usb-uhci (old "uhci" crashes my machine instantly)
There is no "uhci" in 2.5 - if you force loaded the uhci from 2.4 I'm not surprised it crashed your machine! > o remember to load the usual n_hdlc, the ppp_*, pppoatm, modules > > o obviously I needed the new module-init-tools (using 0.9.9) > > Now, the "modem_run" from speedtouch 1.0 is not able to find my modem in > /proc/bus/usb/ under 2.5. So I had to do : > > modem_run -d /proc/bus/usb/001/002 -f /etc/mgmt.o -s -m The size of the files under /proc/bus/usb changed between 2.4 and 2.5. modem_run checked the size to be sure it was looking at the right files. I put in a fix for this some moons ago, but after version 1.0 I guess. > [The reason I am using speedtouch 1.0's modem_run is that any other > version of modem_run fails miserably, giving bulk timeouts : > > Feb 19 00:28:27 lambent modem_run[3354]: BLOCK1 > Feb 19 00:28:27 lambent kernel: usbfs: USBDEVFS_BULK failed dev 2 ep 0x5 > len 991 ret -110 Feb 19 00:28:29 lambent kernel: > drivers/usb/core/message.c: usb_control/bulk_msg: timeout > > Could this be fixed sometime please ?] Strange that this changes between 1.0 and later versions... > After this, things seem to be working fine. > > Hope this helps somebody else. I'm not using 2.5 yet, since I can't send > any sound of ALSA, but I'll have to move someday :) 2.5 is experimental and often won't work properly (it's fun to try out though). Wait for 2.6 before making a permanent move. Duncan. Liste de diffusion modem ALCATEL SpeedTouch USB Pour se d�sinscrire : mailto:[EMAIL PROTECTED]?subject=unsubscribe
