I forgot to say : don't try first with CVS version (and particulary with a so old one and a 330)
Try first with a V1.2beta2 and the firmware.bin from the download page. You should have better result with this firmware and the V1.2beta2 ----- Original Message ----- From: "Brad Chapman" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Cc: <[EMAIL PROTECTED]> Sent: Saturday, August 23, 2003 4:55 PM Subject: [speedtouch] Re: HELP! Red Hat 8, speedtouch_19_11_2002_CVS and SpeedTouch 330 > Mr. Espinasse, > > --- Gilles Espinasse <[EMAIL PROTECTED]> wrote: > > > > > > ----- Original Message ----- > > From: "Brad Chapman" <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Sent: Saturday, August 23, 2003 3:33 PM > > Subject: [speedtouch] HELP! Red Hat 8, speedtouch_19_11_2002_CVS and > > SpeedTouch 330 > > > > > > > > > > I am currently suffering from a serious routing problem with my > > pppd/pppoa3 > > > setup on my Red Hat 8 box. I have absolutely no issues when activating the > > > PPP link; pppd works correctly and the interface and routing are set up > > properly, > > > to all appearances. > > > However, I cannot ping beyond the other end of the PPP link. I can ping > > the > > > other end by IP, but I can ping no other IP or no other hostname. The > > > connection works under Windows, so I know that the problem must lie with > > > my routing. I have a netfilter firewall installed, but even with it > > completely > > > removed, I still canot ping or do anything beyond the other end of the PPP > > link. > > > > > > I am using kernel 2.4.18-26.8.0, speedtouch_19_11_2002_CVS, the Windows > > Alcatel > > > firmware and ppp 2.4.0. My modem is a common SpeedTouch 330. AFAIK the USB > > chipset > > > is the one found on the VT82C586 South Bridge (the system is cutrrently > > down and > > > I will not be able to start it for a little while.) If more info is > > needed, I > > > can provide it. > > > > > *snip > > What show you route -n? > > you should have something similar to > > Kernel IP routing table > > Destination Gateway Genmask Flags Metric Ref Use > > Iface > > 81.48.95.1 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 > > 0.0.0.0 81.48.95.1 0.0.0.0 UG 0 0 0 ppp0 > > That's exactly the format of my routing table: a UH route with a netmask of > 255.255.255.255 for the other end of the PPP link and a UG route for routing Web > traffic to and from the PPP peer. > > > > > 81.48.95.1 is actually my gateway address > > > > Did you include defaultroute in the options file? > > I did, but it seems to make no difference. The kernel routing table appears to > be perfectly fine, and yet nothing works beyond the gateway. Do you have any > other suggestions? > > Thanks, > > Brad > > ===== > Brad Chapman > > Permanent e-mail: [EMAIL PROTECTED] > > __________________________________ > Do you Yahoo!? > Yahoo! SiteBuilder - Free, easy-to-use web site design software > http://sitebuilder.yahoo.com > > > Liste de diffusion modem ALCATEL SpeedTouch USB > Pour se d�sinscrire : mailto:[EMAIL PROTECTED] > > Liste de diffusion modem ALCATEL SpeedTouch USB Pour se d�sinscrire : mailto:[EMAIL PROTECTED]
