Hello world, (my first mail in the list) > -----Message d'origine----- > De : [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > la part de Andreas Jorneus >... > pppoa3.log: > Oct 27 16:19:30 Prostotnic1 pppoa3[945]: pppoa3 version 1.2-beta2 > started by > magny (uid 0) > Oct 27 16:19:30 Prostotnic1 pppoa3[945]: Control thread ready > Oct 27 16:19:30 Prostotnic1 pppoa3[945]: Modem found! > Oct 27 16:19:30 Prostotnic1 pppoa3[945]: pusb_set_configuration 1 I haven't see this line with my speedtouch usb (not 330). I did not have my connection neither :(
> and the process is terminated but the /var/run/pppoa3-modem1.pid are still > showing the killed process. > so when I try to start pppoa3 again it shows: > Oct 27 16:20:32 Prostotnic1 pppoa3[952]: A previous instance seems to be > running > Oct 27 16:20:32 Prostotnic1 pppoa3[952]: Sending the kill signal > to 945 and > waiting... > but no process with pid 945 is running. I have the same problem, pppoa3 seems not exiting cleanly. > and when I manually kill the new process that only waits and > remove the pid > file and restart pppoa3 > I got a kernel panic... > I did the same without a kernel panic my pppoa3 see an non-free endpoint and try to write but can't and it leaves. I haven't done the rest of your diagnostic. I switched to pppoa2 and my speedtouch-1.2beta2 drivers works on my Freebsd 5.1 without recompiling kernel or tuning my system environnement (this bsd is two days old on my machine). > ifconfig gives me: > tap0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500 > ether 00:bd:5e:99:09:00 > > but without a active process attached > > I reed in the ugen man file, that: > > USB_SET_CONFIG: > This operation can only be performed when the control endpoint is > the sole open endpoint. > > This is only set for the -e 1 (speedtouch 330 modem) right? > what is the difference between speedtouch 330 and the usual USB modem that > makes it necessary to set that? > > without the -e 1, I get in pppoa3.lib: In my mind -e is a pppoa2 option close to -m for pppoa3, am I wrong ? I don't know more about it. > > Oct 27 16:46:08 Prostotnic1 pppoa3[589]: pppoa3 version 1.2-beta2 > started by > magny (uid 0) > Oct 27 16:46:08 Prostotnic1 pppoa3[589]: Control thread ready > Oct 27 16:46:08 Prostotnic1 pppoa3[589]: Modem found! > Oct 27 16:46:08 Prostotnic1 pppoa3[589]: host --> pppoa3 --> modem stream > ready > Oct 27 16:46:08 Prostotnic1 pppoa3[589]: modem --> pppoa3 --> host stream > ready After theses lines all my test with -b or not gives me some read(0) and writing fails... > ... > and ppp.log: > I add sometimes LCP in log line of ppp.conf to get more details during tests. Its inconvenien is that it logs also the lqr packets that show the line is up, so after one day connected I saw a huge ppp.log :). best regards, Nicolas Fedou FreeBSD 5.1, speedtouch USD, ISP=wanadoo.fr, France. Liste de diffusion modem ALCATEL SpeedTouch USB Pour se d�sinscrire : mailto:[EMAIL PROTECTED]
