Hello
Further to my previous message I have been hunting around the website faq on http://linux-usb.sourceforge.net/SpeedTouch/faq/index.html The result I get from cat proc/net/atm/speedtch:0 is : Speed Touch USB (usb-00:10.1-2) MAC: 00:90:d0:xx:xx:xx AAL5: tx 0 ( 0 err ), rx 0 ( 0 err, 0 drop ) Line state unknown, no firmware which might help give a better clue to the problem. I've blanked out part of my MAC address. Items of interest or relevance from boot.msg might be : ttyS0 at 0x03f8 (irq = 4) is a 16550A ttyS1 at 0x02f8 (irq = 3) is a 16550A modprobe: modprobe: Can't locate module char-major-212 Configured serial ports I haven't a clue how to relate that modprobe message to any module. Hotplug services start up ok later on with 's07hotplug start' exiting with code 0. 'network start' also works fine with lo started, dsl0 manual and ppp0 manual and an exit value of 0. But I get this in the warn log linux kernel: usb-uhci.c: ENXIO 80000nnn, flags 0, urb nnnnnnnn, burb nnnnnnnn I've not filled in all the nunbers on this because they do vary. As an example of this message: linux kernel: usb-uhci.c: ENXIO 80000480, flags 0, urb c627a720, burb 627aca0 I still have only firmware.bin and KQD6P2.eni in the speedbundle subdirectory firmware and attempted a recompile. And attempted taking the USB modem out of its socket and putting in back in to see if that clears any problem. What have I missed doing? Lesley -- Using M2, Opera's revolutionary e-mail client: http://www.opera.com/m2/ -- Binary/unsupported file stripped by Listar -- -- Type: application/octet-stream -- File: speedtch.info Liste de diffusion modem ALCATEL SpeedTouch USB Pour se d�sinscrire : mailto:[EMAIL PROTECTED]
