Gilles, Please forgive my French but merci beaucoup pour votre response :)
On Wed, 24 Dec 2003 19:13:57 +0100, Gilles Espinasse <[EMAIL PROTECTED]> wrote: > ----- Original Message ----- > From: "lesley" <[EMAIL PROTECTED]> <snip> >> >> I toodled around the speedbundle tree. The HOWTO is meant to be in >> there >> somewhere. >> and that is what I was looking for. I found it in >> firmware_loader/doc-linux/ >> WHat I was able to gather, from the HOWTO is that the files mgmt.o and >> alcaudsl.sys >> are *required* to get the modem going. >> > "the files mgmt.o and alcaudsl.sys are *required* to get the modem > going." > This is not 'and' but 'or'. > In replacement, you can use too firmware.bin on the dowload page of the > user > mode driver or or KQD6P2.eni from Thomson site Ahhhhh well *that* is interesting and useful information :) I have firmware.bin and KQD6P2.eni in the firmware subdirectory my speedbundle directory. I got them both via the page http://linux-usb.sourceforge.net/SpeedTouch/download/index.html with the links thus firmware.bin from http://speedtouch.sourceforge.net/files/firmware.bin KQD6P2.eni from http://download.ethomson.com/download/KQD6_R204.zip >> I haven't yet successfully located the mgmt.o file and would love to >> know >> where it is. > mgmt.o is old and has no more interest. So to summarise I need any one of mgmt.o, alcaudsl.sys, firmware.bin *or* KQD6P2.eni but *not* a combination of them. > > <snip> >> 2. Does anyone know if we have to reconfigure and recompile the kernel? > It depend with wich distribution you start or what kernel configuration > you > use. > The kernel driver is include in 2.4.22 and later. > I have 2.4.20 I have downloaded 2.4.23 but have yet to try to compile and install it. Want to try to avoid compounding problems at the moment. > <big snip> >> > I just received a new SpeedTouch 330 on warrenty (and to my supprise >> > it's silver -- could this be an updated version?). Anyway, >> > since I received it I've had the exact same problem as you and of yet >> > have been unable to solve it. Have you had any luck? >> > >> > Is yours a silver model, or the regular red? If it's silver, could >> > Alactel maybe have changed the firmware and forgot to tell us? I'm >> just >> > plucking at straws really. >> > > Could you say what revision you silver modem is? > You can see the revision with cat /proc/bus/usb/devices > My output from cat /proc/bus/usb/devices for the port the modem is on follows below. I interpret it as saying that I have Rev 2.00 : T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 7 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=ff(vend.) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=06b9 ProdID=4061 Rev= 2.00 S: Manufacturer=ALCATEL S: Product=Speed Touch 330 S: SerialNumber=0090D0A6315E C:* #Ifs= 3 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=50ms I: If#= 1 Alt= 0 #EPs= 0 Cls=ff(vend.) Sub=00 Prot=00 Driver=speedtch I: If#= 1 Alt= 1 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=speedtch E: Ad=06(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I: If#= 1 Alt= 2 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=speedtch E: Ad=06(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=87(I) Atr=01(Isoc) MxPS= 640 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=speedtch E: Ad=06(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=87(I) Atr=01(Isoc) MxPS= 960 Ivl=1ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=05(O) Atr=02(Bulk) MxPS= 8 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 8 Ivl=0ms > The REV_0400 is new on the V3.0 Thomson Speedtouch usb windows driver and > may use a different firmware named ZZZLP2.eni (you will find it after > installing the V3.0 driver on Program Files\Thomson\Speedtouch > usb\bin\sachu3) I couyld get to this if I want to take down this installation and reinstall XP. But I have moved recently and haven't a clue where my XP disk is and I would rather stay completely Linux. This may have resolved something for me. I have downloaded the Windows upgrades from the Thompson site. There is R2.0.1.2 and R3 there but I was confused as to which to use. But from what you have said above, it seems to me I don't need them. I just need to use one of firmware.bin or KQD6P2.eni (both of which I have). I'll try using just one of these first :) Lesley > It's may be the isdn flavour of the 330 modem but it's only a simple > idea in > my head, I know nothing. > %Avens.ADSL%=alcaudsl.Install,USB\VID_06b9&PID_4061&REV_0000 ;Alcatel > ADSL > adapter > %Avens.ADSL.ISDN%=alcaudsl.Install,USB\VID_06b9&PID_4061&REV_0001 > ;Alcatel > ADSL adapter (ISDN) > %Avens.ADSL.330%=alcaudsl.Install,USB\VID_06b9&PID_4061&REV_0200 ;Alcatel > ADSL adapter 330 > %Avens.ADSL.330%=alcaudsl.Install,USB\VID_06b9&PID_4061&REV_0400 ;Alcatel > ADSL adapter 330 (SACHU3) > %Avens.ADSL.COMBO%=alcaudsl.Install,USB\VID_06b9&PID_4061&REV_0300 > ;Alcatel > ADSL adapter COMBO > > > > Liste de diffusion modem ALCATEL SpeedTouch USB > Pour se d�sinscrire : > mailto:[EMAIL PROTECTED] > > -- Using M2, Opera's revolutionary e-mail client: http://www.opera.com/m2/ Liste de diffusion modem ALCATEL SpeedTouch USB Pour se d�sinscrire : mailto:[EMAIL PROTECTED]
